TPS544C27

預覽

4V 至 16V 輸入、35A、PMBus 與 SVID 同步降壓轉換器

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 35 Vin (min) (V) 2.7 Vin (max) (V) 16 Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Extended security, Forced PWM, Light load efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, SVID, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, VID Interface, Voltage Margining Control mode D-CAP+ Vout (min) (V) 0.25 Vout (max) (V) 5.5 Iq (typ) (µA) 9000 Duty cycle (max) (%) 80
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 35 Vin (min) (V) 2.7 Vin (max) (V) 16 Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Extended security, Forced PWM, Light load efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, SVID, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, VID Interface, Voltage Margining Control mode D-CAP+ Vout (min) (V) 0.25 Vout (max) (V) 5.5 Iq (typ) (µA) 9000 Duty cycle (max) (%) 80
WQFN-FCRLF (VBD) 33 20 mm² 5 x 4
  • Single chip power supply for SVID rails
  • Intel VR14 and VR13 compliant
  • VR14.Cloud compliant with telemetry level 2 and security level 2
  • PMBus 1.5 interface with NVM for configuration, telemetry (V/I/T) and fault reporting
  • Input voltage: 4V to 18V
  • Output voltage: 0.25V to 5.5V
  • Supports external 5V bias improving efficiency and enabling 2.7V minimum input voltage
  • Output current: 35A continuous and 40A peak
  • Cycle-by-cycle valley IOUT OCF limit programmable up to 40A
  • Input power monitoring (PIN sense)
  • Programmable DCM or FCCM operation
  • Switching frequency: 400kHz to 2MHz
  • Programmable internal loop compensation including droop (DC Load Line)
  • Programmable soft-start time from 0.5ms to 16ms
  • Programmable soft-stop time from 0.5ms to 4ms
  • Programmable output voltage slew rate: 0.625mV/µs to 25mV/µs
  • Programmable VIN UVLO, VOUT OVF/UVF, and OTF
  • Safe start-up into prebiased outputs
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% tolerance from 0°C to 85°C junction
    • ±1% tolerance from –40°C to 125°C junction
  • Analog output current output pin (IMON)
  • D-CAP+™ control topology with fast transient response
  • Open-drain power-good output (VRRDY)
  • Single chip power supply for SVID rails
  • Intel VR14 and VR13 compliant
  • VR14.Cloud compliant with telemetry level 2 and security level 2
  • PMBus 1.5 interface with NVM for configuration, telemetry (V/I/T) and fault reporting
  • Input voltage: 4V to 18V
  • Output voltage: 0.25V to 5.5V
  • Supports external 5V bias improving efficiency and enabling 2.7V minimum input voltage
  • Output current: 35A continuous and 40A peak
  • Cycle-by-cycle valley IOUT OCF limit programmable up to 40A
  • Input power monitoring (PIN sense)
  • Programmable DCM or FCCM operation
  • Switching frequency: 400kHz to 2MHz
  • Programmable internal loop compensation including droop (DC Load Line)
  • Programmable soft-start time from 0.5ms to 16ms
  • Programmable soft-stop time from 0.5ms to 4ms
  • Programmable output voltage slew rate: 0.625mV/µs to 25mV/µs
  • Programmable VIN UVLO, VOUT OVF/UVF, and OTF
  • Safe start-up into prebiased outputs
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% tolerance from 0°C to 85°C junction
    • ±1% tolerance from –40°C to 125°C junction
  • Analog output current output pin (IMON)
  • D-CAP+™ control topology with fast transient response
  • Open-drain power-good output (VRRDY)

The TPS544C27 device is highly integrated buck converter with D-CAP+ control topology for fast transient response. All programmable parameters can be configured by the PMBus interface and stored in non-volatile memory (NVM) as the new default values to minimize the external component count. These features make the device well-designed for space-constrained applications.

The TPS544C27 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in the Intel server and SoC platforms requiring VR13, VR14, or VR14.Cloud compliance.

Fault management and status reports for the overcurrent fault (OCF), VOUT overvoltage fault (OVF), undervoltage fault (UVF), and overtemperature fault are provided on the device. The TPS544C27 device provides a full set of telemetry, including output voltage, output current, and device temperature.

TPS544C27 is a lead-free device and is RoHS compliant without exemption.

The TPS544C27 device is highly integrated buck converter with D-CAP+ control topology for fast transient response. All programmable parameters can be configured by the PMBus interface and stored in non-volatile memory (NVM) as the new default values to minimize the external component count. These features make the device well-designed for space-constrained applications.

The TPS544C27 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in the Intel server and SoC platforms requiring VR13, VR14, or VR14.Cloud compliance.

Fault management and status reports for the overcurrent fault (OCF), VOUT overvoltage fault (OVF), undervoltage fault (UVF), and overtemperature fault are provided on the device. The TPS544C27 device provides a full set of telemetry, including output voltage, output current, and device temperature.

TPS544C27 is a lead-free device and is RoHS compliant without exemption.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS544C27 4V to 18 V Input, 35 A, Buck Converter With SVID and PMBus® datasheet PDF | HTML 2024年 7月 31日
EVM User's guide TPS544C27EVM 4V to 18V, 35A Step-Down Converter Evaluation Module PDF | HTML 2024年 6月 18日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS544C27EVM — TPS544C27 evaluation module

The TPS544C27EVM is an evaluation module for the TPS544C27 DC/DC synchronous buck converter with a digital PMBus and a series voltage identification (SVID) interface to accommodate Intel processors. The evaluation module accepts an 8V to 16V input and can deliver an output current up to 35A. The (...)
使用指南: PDF | HTML
開發板

USB-TO-GPIO2 — USB-TO-GPIO2 USB 介面轉接器評估模組

此 EVM 透過標準的 A 型到迷你 B 型 USB 電纜,充當主機 PC 和一個或多個目標裝置之間的介面轉接器或橋接器。USB 介面轉接器與主機 PC 之間的通訊透過 USB 進行,而 USB 介面轉接器與目標裝置之間的通訊則是透過內部積體電路 (I²C)、通用輸入和輸出 GPIO 或兩者。橋接器會轉換 USB 和 I²C/GPIO 之間的通訊交易。
使用指南: PDF | HTML
TI.com 無法提供
設計工具

TPS544C27-DESIGN TPS544C27 Mysecure

TPS544C27 Mysecure folder
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
TPS544C27 4V 至 16V 輸入、35A、PMBus 與 SVID 同步降壓轉換器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (VBD) 33 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片