首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS61376

現行

具有 2.5% 精確度輸入平均電流限制及真斷線的 25-V、4.5-V、升壓轉換器

立即訂購
產品規格表

TPS61376

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.9 Vin (max) (V) 23 Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 1200 Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Nonsynchronous, UVLO adjustable Control mode current mode Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (µA) 80 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.5
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.9 Vin (max) (V) 23 Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 1200 Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Nonsynchronous, UVLO adjustable Control mode current mode Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (µA) 80 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.5
VQFN-HR (RYH) 13 5 mm² 2.5 x 2
  • Wide input voltage and output voltage range
    • Input voltage range: 2.9V to 23V
    • Output voltage range: 4.5V to 25V

  • Peak inductor current limit up to 4.5A

  • Programmable input average current limit range: 0.1A to 3A

  • Switching frequency: 1.2MHz
  • Integrated two MOSFETs
    • ISO FET: 40mΩ
    • Low-side FET: 50mΩ
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • True disconnection between input and output during EN shutdown
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5mm × 2.0mm HotRod™ Lite VQFN package
  • Wide input voltage and output voltage range
    • Input voltage range: 2.9V to 23V
    • Output voltage range: 4.5V to 25V

  • Peak inductor current limit up to 4.5A

  • Programmable input average current limit range: 0.1A to 3A

  • Switching frequency: 1.2MHz
  • Integrated two MOSFETs
    • ISO FET: 40mΩ
    • Low-side FET: 50mΩ
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • True disconnection between input and output during EN shutdown
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5mm × 2.0mm HotRod™ Lite VQFN package

The TPS61376 is a high voltage non-synchronous boost converter with input average current limit and true load disconnect functions. The input average current limit threshold can be programmed through the ILIM pin from 0.1A to 3.0A. The isolation FET between the VP and SW pin will completely cut off the path between input and output when the device is disabled. The TPS61376 has a wide input voltage range from 2.9V to 23V and output voltage covers up to 25V.

The TPS61376 implements the peak current mode with the adaptive off-time control topology. The device works in PWM mode at moderate to heavy loads. At the light load conditions, the device enters PFM mode to maintain high efficiency over the entire load current range.

The TPS61376 also integrates robust protection features including output overvoltage protection, cycle-by-cycle overcurrent protection and thermal shutdown.

The TPS61376 offers a very small solution size with a 2.5mm × 2.0mm HotRod™ Lite VQFN package.

The TPS61376 is a high voltage non-synchronous boost converter with input average current limit and true load disconnect functions. The input average current limit threshold can be programmed through the ILIM pin from 0.1A to 3.0A. The isolation FET between the VP and SW pin will completely cut off the path between input and output when the device is disabled. The TPS61376 has a wide input voltage range from 2.9V to 23V and output voltage covers up to 25V.

The TPS61376 implements the peak current mode with the adaptive off-time control topology. The device works in PWM mode at moderate to heavy loads. At the light load conditions, the device enters PFM mode to maintain high efficiency over the entire load current range.

The TPS61376 also integrates robust protection features including output overvoltage protection, cycle-by-cycle overcurrent protection and thermal shutdown.

The TPS61376 offers a very small solution size with a 2.5mm × 2.0mm HotRod™ Lite VQFN package.
filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS61376 23VIN , 25VOUT , 4.5A, Boost Converter with up to ±2.5% Accuracy Input Average Current Limit and True Load Disconnection datasheet (Rev. B) PDF | HTML 2023年 8月 11日
EVM User's guide TPS61376 Evaluation Module User's Guide (Rev. B) PDF | HTML 2023年 3月 3日
Application note High-Precision Input Average Current Limit Boost Converter, Facilitating More In PDF | HTML 2022年 11月 7日
Certificate TPS61376EVM-NSYNC EU RoHS Declaration of Comformity (DoC) 2022年 1月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS61376EVM-NSYNC — 具 DC 輸入電流限制且適用於升壓轉換器的 TPS61376 評估模組

TPS61376 為整合 25-V、4.5-A 開關，可在 2.9-V 至 25-V 輸入範圍內運作的高電壓非同步升壓轉換器。在非同步配置中透過將 VP 與 SW 針腳間的高壓側 N 通道 FET 連接，實現負載斷開與輸入 DC 電流限制功能。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS61376 Encrypted PSpice Model

SLVMDY3.ZIP (183 KB) - PSpice Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RYH) 13 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片