TPS65135
- Single-Inductor, Multiple-Output Topology
- 2.5-V to 5.5-V Input Voltage Range
- 750-mW Output Power at VI = 2.9 V
- Positive Output Voltages Up to 6 V
- Negative Output Voltage Down to –7 V
- 1% Output Voltage Accuracy
- Up to 50% Output Current Mismatch Allowed
- Excellent Line Regulation
- Advanced Power-Save Mode for Light-Load Efficiency
- Low-Noise Operation
- Out-of-Audio Mode
- Short-Circuit Protection
- Thermal Shutdown
- 3-mm × 3-mm Thin QFN Package
The TPS65135 device is a high-efficiency split-rail power supply. Thanks to its single-inductor, multiple-output (SIMO) topology, the converter uses very few external components. The device operates with a buck-boost topology and generates positive and negative output voltages above or below the input supply voltage. The SIMO topology achieves excellent line and load regulation, which is necessary, for example, to avoid disturbance of a mobile phone display as a result of input voltage variations that occur during transmit periods in mobile communication systems. The device can also be used as a general-purpose split-rail supply as long as the output current mismatch between the rails is less than 50%.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS65135 Single-Inductor, Multiple-Output Regulator datasheet (Rev. C) | PDF | HTML | 2017年 1月 30日 |
Application note | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||
Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
User guide | TPS65135 SIMO Converter Evaluation Module | 2011年 10月 28日 | ||
Application note | Minimizing Ringing at the Switch Node of a Boost Converter | 2006年 9月 15日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS65135EVM-265 — TPS65135 SIMO 轉換器評估模組
The Texas Instruments TPS65135EVM evaluation module uses a TPS65135 single-inductor, multipleoutput regulator to provide both a positive and negative power rail. The goal of the EVM is to facilitate evaluation of the TPS65135. The user's guide describes the characteristics, operation, and use of (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TIDA-00385 — 適用於可攜式和智慧型手機應用的高保真音訊耳機播放參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。