首頁 電源管理 LCD 及 OLED 顯示器電源和驅動器
首頁
電源管理
LCD 及 OLED 顯示器電源和驅動器

TPS65150-Q1

現行

具整合式 VCOM 緩衝器的車用小型 LCD 偏置電源

立即訂購
產品規格表

TPS65150-Q1

現行
產品規格表 立即訂購

產品詳細資料

Display type Automotive, LCD unipolar IC integration LCD bias, VCOM Vin (min) (V) 1.8 Vin (max) (V) 6 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 5 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features Adjustable sequencing, GPM or GVS, VCOM or op amp Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125
Display type Automotive, LCD unipolar IC integration LCD bias, VCOM Vin (min) (V) 1.8 Vin (max) (V) 6 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 5 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features Adjustable sequencing, GPM or GVS, VCOM or op amp Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • AEC-Q100 Qualified:
    • Device Temperature Grade 1: –40°C to 125°C Junction Temperature
    • Device HBM ESD Classification According to AEC - Q100-002
    • Device CDM ESD Classification According to AEC - Q100-011
  • Input Voltage Range: 1.8 V to 6 V
  • V(VS) Boost Converter
    • Up to 15 V Output Voltage
    • < 1% Output Voltage Accuracy
    • 2-A Switch Current Limit
  • V(VGH) Positive Regulated Charge Pump Driver
    • Up to 30 V Output Voltage
    • Gate Voltage Shaping
  • V(VGL) Negative Regulated Charge Pump Driver
    • Down to –15 V Output Voltage
  • Integrated VCOM Buffer
  • Adjustable Power On Sequencing
    • Gate Drive Signal for External Isolation MOSFET for V(VS)
  • Protection Features
    • Out-of-Regulation Protection
    • Over-voltage Protection
    • Adjustable Fault Detection Timing
    • Thermal Shutdown
  • 24-Pin TSSOP Package with Exposed Thermal Pad
  • AEC-Q100 Qualified:
    • Device Temperature Grade 1: –40°C to 125°C Junction Temperature
    • Device HBM ESD Classification According to AEC - Q100-002
    • Device CDM ESD Classification According to AEC - Q100-011
  • Input Voltage Range: 1.8 V to 6 V
  • V(VS) Boost Converter
    • Up to 15 V Output Voltage
    • < 1% Output Voltage Accuracy
    • 2-A Switch Current Limit
  • V(VGH) Positive Regulated Charge Pump Driver
    • Up to 30 V Output Voltage
    • Gate Voltage Shaping
  • V(VGL) Negative Regulated Charge Pump Driver
    • Down to –15 V Output Voltage
  • Integrated VCOM Buffer
  • Adjustable Power On Sequencing
    • Gate Drive Signal for External Isolation MOSFET for V(VS)
  • Protection Features
    • Out-of-Regulation Protection
    • Over-voltage Protection
    • Adjustable Fault Detection Timing
    • Thermal Shutdown
  • 24-Pin TSSOP Package with Exposed Thermal Pad

The TPS65150-Q1 is an integrated power-supply for automotive LCD applications. The device integrates a boost converter for the source voltage and two regulated adjustable charge pump drivers for the gate voltages. For reduced external cost, improved picture quality and reduced image sticking, the device includes a VCOM buffer and a gate-voltage shaping function.

The device is designed to operate from a supply voltage of 1.8 V to 6 V making it ideal for automotive LCD applications using a fixed 3.3 V or 5 V input-voltage rail.

Adjustable power-on sequencing for VGL and VGH allow the device to be optimized for a variety of displays.

For protection from system malfunction, the TPS65150-Q1 integrates an adjustable shutdown latch feature. The device monitors the outputs (V(VS), V(VGL), V(VGH)); and, as soon as one of the outputs falls below its power-good threshold for longer than the adjustable fault delay time, the device enters shutdown.

The TPS65150-Q1 is an integrated power-supply for automotive LCD applications. The device integrates a boost converter for the source voltage and two regulated adjustable charge pump drivers for the gate voltages. For reduced external cost, improved picture quality and reduced image sticking, the device includes a VCOM buffer and a gate-voltage shaping function.

The device is designed to operate from a supply voltage of 1.8 V to 6 V making it ideal for automotive LCD applications using a fixed 3.3 V or 5 V input-voltage rail.

Adjustable power-on sequencing for VGL and VGH allow the device to be optimized for a variety of displays.

For protection from system malfunction, the TPS65150-Q1 integrates an adjustable shutdown latch feature. The device monitors the outputs (V(VS), V(VGL), V(VGH)); and, as soon as one of the outputs falls below its power-good threshold for longer than the adjustable fault delay time, the device enters shutdown.

filter 尋找其它 LCD 及 OLED 顯示器電源和驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS65131-Q1 現行 具有雙路正負輸出的車用分裂軌轉換器 (750mA typ) This product offers two rails up to +/-15V.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet TPS65150-Q1 Automotive LCD Power Supply for Source and Gate Drivers with Gate Voltage Shaping and VCOM Buffer datasheet (Rev. C) PDF | HTML 2017年 5月 26日
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 2022年 10月 28日
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
White paper Powering automotive displays to create interactive driving experiences 2017年 12月 21日
Application note How to Calculate the Output Voltage Ranges of the Charge Pumps in the TPS65150 2017年 2月 6日
Technical article Split-rail converters reduce BOM size and cost in new automotive displays PDF | HTML 2015年 7月 1日
Application note Minimizing Ringing at the Switch Node of a Boost Converter 2006年 9月 15日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS65150EVM-697 — 具有整合式 VCOM 的 TPS65150 低 Vin LCD 電源供應 (偏壓) 評估模組

The TPS65150 offers a very compact and small power supply solution that provides all three voltages required by thin film transistor (TFT) LCD displays. With an input voltage range of 1.8 V to 6 V, the device is ideal for notebooks powered by a 2.5 V or 3.3 V input rail or monitor applications with (...)

使用指南: PDF
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片