TPS732
- Stable with no output capacitor or any value or type of capacitor
- Input voltage range: 1.7V to 5.5V
- Ultra-low dropout voltage: 40mV typical at 250mA
- Excellent load transient response—with or without optional output capacitor
- NMOS topology provides low reverse leakage current
- Low noise: 30µVRMS typical (10kHz to 100kHz)
- 0.5% initial accuracy
- 1% overall accuracy (line, load, and temperature)
- Less than 1µA maximum IQ in shutdown mode
- Thermal shutdown and specified min and max current limit protection
- Available in multiple output voltage versions:
- Fixed outputs of 1.2V to 5V
- Adjustable outputs from 1.2V to 5.5V
- Custom outputs available
The TPS732 low-dropout (LDO) voltage regulator uses an NMOS pass transistor in a voltage-follower configuration. This topology is stable using output capacitors with low equivalent series resistance (ESR), and even allows operation without a capacitor. The device also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.
The TPS732 uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is less than 1µA and designed for portable applications. The extremely low output noise (30µVRMS with 0.1µF CNR) is designed for powering VCOs. This device is protected by thermal shutdown and foldback current limit.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS732 Capacitor-Free, NMOS, 250mA, Low-Dropout Regulator With Reverse Current Protection datasheet (Rev. Q) | PDF | HTML | 2024年 9月 10日 |
Application note | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020年 8月 18日 | |
Technical article | LDO Basics: Thermals – How hot is your application? | PDF | HTML | 2017年 9月 20日 | |
Application note | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017年 8月 9日 | |
User guide | TPS73x01DRBEVM-518 User's Guide | 2009年 8月 13日 | ||
User guide | DEM-SOT223LDO Demonstration Fixture | 2003年 10月 15日 | ||
More literature | DMOS Delivers Dramatic Performance Gains to LDO Regulators (EDN mag) | 2001年 2月 14日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DEM-SOT223LDO — 採用 SOT223 (DCQ) 封裝與最大正輸出 LDO 相容的 DEM-SOT223LDO
The Texas Instruments DEM-SOT223LDO demonstration module (DEM) helps designers evaluate the operation and performance of Texas Instruments low-dropout regulators (LDOs). This module is compatible with most positive output LDOs offered in the SOT223 (DCQ) package.
TPS73201DRBEVM-518 — TPS73201DRBEVM-518 評估模組
12Vin Power Design using Integrated-FET DCDC Converters and a LDO (Rev. A)
TIDA-00661 — 適用於空氣斷路器的高解析度、快速啟動類比前端參考設計
TIDA-00306 — 適用於電網應用的銅纜轉光纖 100BASE-FX 或 1000BASE-X 媒體轉換器參考設計
PMP21887 — 適用 ASIC 的高電流 360-A 靜態 /600-A 峰值核心 PMBus 電壓 12 相參考設計
PMP20489 — 高密度 12V 輸入 0.8V 200A 及 3.3V 75A POL 參考設計
TIDA-00826 — 50 Ohm 2 GHz 示波器前端參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOT-223 (DCQ) | 6 | Ultra Librarian |
SOT-23 (DBV) | 5 | Ultra Librarian |
VSON (DRB) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。