TPS748A-Q1

現行

具電源良好與啟用功能的車用 1.5-A、0.8-V 低雜訊可調式 LDO 電壓穩壓器

產品詳細資料

Output options Adjustable Output Iout (max) (A) 1.5 Vin (max) (V) 6 Vin (min) (V) 0.8 Vout (max) (V) 3.6 Vout (min) (V) 0.8 Rating Automotive Noise (µVrms) 7 PSRR at 100 KHz (dB) 38 Iq (typ) (mA) 0.55 Thermal resistance θJA (°C/W) 47.2 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Power good, Soft start Accuracy (%) 1.25 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 150
Output options Adjustable Output Iout (max) (A) 1.5 Vin (max) (V) 6 Vin (min) (V) 0.8 Vout (max) (V) 3.6 Vout (min) (V) 0.8 Rating Automotive Noise (µVrms) 7 PSRR at 100 KHz (dB) 38 Iq (typ) (mA) 0.55 Thermal resistance θJA (°C/W) 47.2 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Power good, Soft start Accuracy (%) 1.25 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 150
VSON (DRC) 10 9 mm² 3 x 3
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C4A
  • Extended junction temperature (T J) range:
    • –40°C to +150°C
  • Input voltage range:
    • IN: V IN + V DO to 6.0 V
    • BIAS: V OUT + V DO(BIAS) to 6.0 V
  • V OUT range: 0.8 V to 3.6 V
  • Low dropout: 60 mV typical at 1.5 A, V BIAS = 5 V
  • Power-good (PG) output allows supply monitoring or provides a sequencing signal for other supplies
  • 2% accuracy over line, load, and temperature
  • Programmable soft-start provides linear voltage start-up
  • V BIAS permits low V IN operation with good transient response
  • Stable with any output capacitor ≥ 2.2 µF
  • Available in small, 3-mm × 3-mm × 1-mm VSON-10 packages
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C4A
  • Extended junction temperature (T J) range:
    • –40°C to +150°C
  • Input voltage range:
    • IN: V IN + V DO to 6.0 V
    • BIAS: V OUT + V DO(BIAS) to 6.0 V
  • V OUT range: 0.8 V to 3.6 V
  • Low dropout: 60 mV typical at 1.5 A, V BIAS = 5 V
  • Power-good (PG) output allows supply monitoring or provides a sequencing signal for other supplies
  • 2% accuracy over line, load, and temperature
  • Programmable soft-start provides linear voltage start-up
  • V BIAS permits low V IN operation with good transient response
  • Stable with any output capacitor ≥ 2.2 µF
  • Available in small, 3-mm × 3-mm × 1-mm VSON-10 packages

The TPS748A-Q1 low-dropout (LDO) linear regulator provides an easy-to-use robust power management solution for a wide variety of applications. User-programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic and designed for powering many different types of processors and application-specific integrated circuits (ASICs). The enable input and power-good output allow easy sequencing with external regulators. This complete flexibility enables a solution to be configured that meets the sequencing requirements of field-programmable gate arrays (FPGAs), digital signal processors (DSPs), and other applications with special start-up requirements.

A precision reference and error amplifier deliver 2% accuracy over load, line, temperature, and process. The device is stable with any type of capacitor greater than or equal to 2.2 µF, and is fully specified for T J = –40°C to +150°C. The TPS748A-Q1 is offered in a small, 3-mm × 3-mm, VSON-10 package, yielding a highly compact, total solution size.

The TPS748A-Q1 low-dropout (LDO) linear regulator provides an easy-to-use robust power management solution for a wide variety of applications. User-programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic and designed for powering many different types of processors and application-specific integrated circuits (ASICs). The enable input and power-good output allow easy sequencing with external regulators. This complete flexibility enables a solution to be configured that meets the sequencing requirements of field-programmable gate arrays (FPGAs), digital signal processors (DSPs), and other applications with special start-up requirements.

A precision reference and error amplifier deliver 2% accuracy over load, line, temperature, and process. The device is stable with any type of capacitor greater than or equal to 2.2 µF, and is fully specified for T J = –40°C to +150°C. The TPS748A-Q1 is offered in a small, 3-mm × 3-mm, VSON-10 package, yielding a highly compact, total solution size.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
TPS74801-Q1 現行 具電源良好與啟用功能的車用 1.5-A、低 VIN (0.8 V) 可調式 LDO 電壓穩壓器 Lower thermal resistance and VQFN option

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS748A-Q1 Automotive, 1.5-A, Low-Dropout Linear Regulator With Programmable Soft-Start datasheet (Rev. A) PDF | HTML 2023年 5月 25日
Product overview Mobileye EyeQ™6H – Discrete Power Tree PDF | HTML 2024年 11月 7日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS74801EVM-177 — TPS74801 LDO 線性穩壓器評估模組

TPS74801EVM-177 評估模組 (EVM) 是一個用於評估 TPS74801 超壓降線性穩壓器的平台。

TPS74801 需要低功耗偏壓 (VBIAS) 和電源輸入電壓 (VIN)。穩壓器可提供低至 0.8 V 的輸出電壓,並擁有整合式監控電路及開漏輸出,可在輸出電壓達到穩壓 [電源良好 (PG)] 時進入高阻抗狀態。TPS74801 可提供最高 1.5 A 的 DC 電流。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS748A and TPS748A-Q1 PSpice Transient Model (Rev. A)

SBVM992A.ZIP (80 KB) - PSpice Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSON (DRC) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片