首頁 電源管理 線性與低壓差 (LDO) 穩壓器
首頁
電源管理
線性與低壓差 (LDO) 穩壓器

TPS7B4255-Q1

現行

具 5-mV 追蹤公差的車用、70-mA、40-V 電壓追蹤低壓降 (LDO) 穩壓器

立即訂購
產品規格表

TPS7B4255-Q1

現行
產品規格表 立即訂購

產品詳細資料

Output options Tracking Output Iout (max) (A) 0.07 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 40 Vout (min) (V) 2 Rating Automotive Noise (µVrms) 150 Iq (typ) (mA) 0.031 Thermal resistance θJA (°C/W) 127, 176 TI functional safety category Functional Safety-Capable Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Reverse Current Protection, Reverse voltage protection, Short-to-battery protection Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -40 to 125
Output options Tracking Output Iout (max) (A) 0.07 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 40 Vout (min) (V) 2 Rating Automotive Noise (µVrms) 150 Iq (typ) (mA) 0.031 Thermal resistance θJA (°C/W) 127, 176 TI functional safety category Functional Safety-Capable Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Reverse Current Protection, Reverse voltage protection, Short-to-battery protection Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8 SOT-23 (DYB) 5 7.911 mm² 2.93 x 2.7
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Wide input operating voltage range (3 V to 40 V):
    • Absolute maximum input voltage range: –40 V to +45 V
  • Wide output voltage range: 2 V to 40 V
  • Maximum output current: 70 mA
  • Very-tight, output-tracking tolerance: 5 mV (max)
  • Low dropout voltage: 500 mV (max) at 70 mA
  • Combined reference and enable functionalities
  • Low quiescent current at light load: 35 µA
  • Wide COUT and ESR range:
    • Stable with 1-µF to 200-µF ceramic output capacitor, 1-mΩ to 3-Ω ESR
  • Integrated protection features:
    • Reverse current protection
    • Reverse polarity protection
    • Overtemperature protection
    • Protection against output short-circuit to ground and supply
  • Available in two 5-pin SOT-23 packages:
    • Standard SOT-23 (DBV)
    • Thermally enhanced SOT-23 (DYB)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Wide input operating voltage range (3 V to 40 V):
    • Absolute maximum input voltage range: –40 V to +45 V
  • Wide output voltage range: 2 V to 40 V
  • Maximum output current: 70 mA
  • Very-tight, output-tracking tolerance: 5 mV (max)
  • Low dropout voltage: 500 mV (max) at 70 mA
  • Combined reference and enable functionalities
  • Low quiescent current at light load: 35 µA
  • Wide COUT and ESR range:
    • Stable with 1-µF to 200-µF ceramic output capacitor, 1-mΩ to 3-Ω ESR
  • Integrated protection features:
    • Reverse current protection
    • Reverse polarity protection
    • Overtemperature protection
    • Protection against output short-circuit to ground and supply
  • Available in two 5-pin SOT-23 packages:
    • Standard SOT-23 (DBV)
    • Thermally enhanced SOT-23 (DYB)

The TPS7B4255-Q1 is a low-dropout (LDO) voltage-tracking regulator, with high tracking accuracy and excellent load and line transient response. The device is available in two 5-pin, SOT-23 packages (DBV and DYB). The TPS7B4255-Q1 is designed to supply off-board sensors in automotive applications such as powertrain systems. Because the risk of failure in cables that deliver off-board power is high, the device comes with integrated protection features against fault conditions such as reverse current (short to battery), reverse polarity, output short to ground (current limit), and overtemperature (thermal shutdown). The device is designed to handle a 45-V (absolute maximum) input voltage and survive the automotive load dump transient conditions.

A reference voltage applied at the ADJ/EN pin is effectively tracked at the OUT pin with very tight tolerance for loads up to 70 mA. The TPS7B4255-Q1 can therefore deliver the power-supply voltage to the off-board sensors with high precision, which can help improve the reliability and accuracy of measurements made using ratiometric sensors.

By setting the ADJ/EN input pin low, the TPS7B4255-Q1 switches to standby mode and reduces the quiescent current of the LDO to less than 3.25 µA.

The TPS7B4255-Q1 is a low-dropout (LDO) voltage-tracking regulator, with high tracking accuracy and excellent load and line transient response. The device is available in two 5-pin, SOT-23 packages (DBV and DYB). The TPS7B4255-Q1 is designed to supply off-board sensors in automotive applications such as powertrain systems. Because the risk of failure in cables that deliver off-board power is high, the device comes with integrated protection features against fault conditions such as reverse current (short to battery), reverse polarity, output short to ground (current limit), and overtemperature (thermal shutdown). The device is designed to handle a 45-V (absolute maximum) input voltage and survive the automotive load dump transient conditions.

A reference voltage applied at the ADJ/EN pin is effectively tracked at the OUT pin with very tight tolerance for loads up to 70 mA. The TPS7B4255-Q1 can therefore deliver the power-supply voltage to the off-board sensors with high precision, which can help improve the reliability and accuracy of measurements made using ratiometric sensors.

By setting the ADJ/EN input pin low, the TPS7B4255-Q1 switches to standby mode and reduces the quiescent current of the LDO to less than 3.25 µA.
filter 尋找其它 線性與低壓差 (LDO) 穩壓器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS7B4255-Q1 Automotive, 70-mA, 40-V, Voltage-Tracking LDO With 5-mV Tracking Tolerance datasheet (Rev. A) PDF | HTML 2023年 8月 23日
Functional safety information TPS7B4255-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2023年 2月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7B4255EVM-062 — 適用 70-mA、40-V 電壓追蹤低壓降 (LDO) 穩壓器的 TPS7B4255 評估模組

TPS7B4255EVM-062 評估模組 (EVM) 可用來評估 TPS7B4255-Q1 線性穩壓器的運作及性能，以在電路應用中使用。

此特定 EVM 配置包含適合汽車應用的 70-mA、高電壓、電壓追蹤、低壓降 (LDO) 穩壓器，以及適合超低寄生測量的板載負載暫態電路。該穩壓器可提供最高 70-mA 和 3-mV 追蹤公差，並具備高達 40 V 及 45 V 暫態的廣泛輸入電壓 (VIN) 範圍。為確保 TPS7B4255-Q1 的穩定性，請使用具小於 3-&Omega 等效串聯電阻 (ESR) 的 1-µF (或更大) 輸出電容器。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS7B4255-Q1 PSpice Transient Model (Rev. A)

SBVM991A.ZIP (18 KB) - PSpice Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 5 Ultra Librarian
SOT-23 (DYB) 5 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片