TPS7B81

現行

具啟用功能的 150-mA、無電池 (40-V)、超低 IQ、低壓差 (LDO) 電壓穩壓器

產品詳細資料

Output options Fixed Output Iout (max) (A) 0.15 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5 Rating Catalog Noise (µVrms) 450 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 0.0027 Thermal resistance θJA (°C/W) 63.9, 72.8 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 270 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.15 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5 Rating Catalog Noise (µVrms) 450 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 0.0027 Thermal resistance θJA (°C/W) 63.9, 72.8 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 270 Operating temperature range (°C) -40 to 125
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 WSON (DRV) 6 4 mm² 2 x 2
  • Wide input voltage range: 3 V to 40 V
  • Output current: 150 mA
  • Ultra-low quiescent current (IQ):
    • 2.7 µA typical at light loads
    • 4.5 µA maximum at light loads
  • Accuracy: 1.5% over line, load, and temperature
  • Typical dropout voltage: 180 mV at 100 mA
  • Wide enable voltage range: 2 V to VIN (40 V max)
  • Input voltage transient tolerance: 45 V
  • Fixed 5-V and 3.3-V output options
  • Current limit and thermal shutdown protection
  • Stable with a wide range of capacitors (1 µF to 200 µF)(1)
  • Junction temperature range: –40°C to +150°C
  • High thermal performance packages:
    • DGN (8-pin HVSSOP), RθJA = 63.9°C/W
    • DRV (6-pin WSON), RθJA = 72.8°C/W

    (1)

(1)See the output capacitor requirements in the Recomended Operation Conditions table

  • Wide input voltage range: 3 V to 40 V
  • Output current: 150 mA
  • Ultra-low quiescent current (IQ):
    • 2.7 µA typical at light loads
    • 4.5 µA maximum at light loads
  • Accuracy: 1.5% over line, load, and temperature
  • Typical dropout voltage: 180 mV at 100 mA
  • Wide enable voltage range: 2 V to VIN (40 V max)
  • Input voltage transient tolerance: 45 V
  • Fixed 5-V and 3.3-V output options
  • Current limit and thermal shutdown protection
  • Stable with a wide range of capacitors (1 µF to 200 µF)(1)
  • Junction temperature range: –40°C to +150°C
  • High thermal performance packages:
    • DGN (8-pin HVSSOP), RθJA = 63.9°C/W
    • DRV (6-pin WSON), RθJA = 72.8°C/W

    (1)

(1)See the output capacitor requirements in the Recomended Operation Conditions table

The TPS7B81 is a low-dropout (LDO) linear regulator that operates from input voltages up to 40 V and can supply up to 150 mA in current. With only 2.7 µA of quiescent current at light loads, the device is an excellent choice for wide input supply designs and high cell count battery applications that need very low standby power consumption. The 45-V transient tolerance provides additional headroom for applications where inductive kickback may be present, thereby reducing external circuitry for voltage suppression.

With integrated short-circuit and overcurrent limiting, the TPS7B81 protects the system during fault conditions. In addition to the low standby power consumption, the very low dropout voltage in light load conditions helps maintain regulation even when powered by depleted batteries.

The TPS7B81 is available in thermally enhanced, 8-pin HVSSOP and 6-pin WSON packages. Both packages offer high thermal conductivity, and their small size supports compact design, making them well suited for space-limited applications such as power tools or motor drive modules and battery packs.

The TPS7B81 is a low-dropout (LDO) linear regulator that operates from input voltages up to 40 V and can supply up to 150 mA in current. With only 2.7 µA of quiescent current at light loads, the device is an excellent choice for wide input supply designs and high cell count battery applications that need very low standby power consumption. The 45-V transient tolerance provides additional headroom for applications where inductive kickback may be present, thereby reducing external circuitry for voltage suppression.

With integrated short-circuit and overcurrent limiting, the TPS7B81 protects the system during fault conditions. In addition to the low standby power consumption, the very low dropout voltage in light load conditions helps maintain regulation even when powered by depleted batteries.

The TPS7B81 is available in thermally enhanced, 8-pin HVSSOP and 6-pin WSON packages. Both packages offer high thermal conductivity, and their small size supports compact design, making them well suited for space-limited applications such as power tools or motor drive modules and battery packs.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPS7A44 現行 具備電源良好且可選中輸出軌的 50-mA、65-V、低 IQ、LDO 線性電壓穩壓器 Wider input voltage range, lower current, larger package
最新 TPS7B91 現行 150mA 40V 1.5μA IQ 低壓差線性穩壓器 No ENABLE option
最新 TPS7B92 現行 300mA 40V 1.8μA IQ 低壓差線性穩壓器 No ENABLE option, higher output current

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TPS7B81 150-mA, 40-V, Ultra-Low-IQ, Low-Dropout Regulator datasheet PDF | HTML 2020年 4月 23日
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021年 2月 18日
EVM User's guide TPS7B81EVM-025 Evaluation Module User's Guide 2019年 2月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7B81EVM-025 — TPS7B81 150-mA、無電池 (40-V)、超低 IQ LDO 穩壓器評估模組

The TPS7B81EVM-025 evaluation module (EVM) is designed for a typical configuration to evaluate the operation and performance of the TPS7B81, which is a 150-mA, high-voltage, ultra-low-IQ, low-dropout (LDO) linear regulator.

The EVM circuit board is configured to be a reference design for engineering (...)

使用指南: PDF
TI.com 無法提供
參考設計

PMP23454 — 通用輸入、430W 電動工具充電器參考設計

此參考設計為適合電動工具應用的通用輸入、430W 定電流 (CC)、定電壓 (CV) 充電器。此參考設計在涓流充電模式下支援 0V 至 12.5V 的輸出電壓範圍,在全充電模式下支援 7.5V 至 22.5V 的輸出電壓範圍。已停用功率因數校正 (PFC),且在涓流充電模式下,電感器-電感器電容器 (LLC) 會進入低功率模式,因此在 115Vac 時可達到 174mW 的無負載待機功率,在 230Vac 時則可達到 325mW。此參考設計使用 UCC28180、UCC256604、UCC24612、TL331 和 TPS7B8133 裝置。
Test report: PDF
參考設計

TIDA-010253 — Battery control unit reference design for energy storage systems

This reference design is a central controller for a high-voltage Lithium-ion (Li-ion), lithium iron phosphate (LiFePO4) battery rack. This design provides driving circuits for high-voltage relay, communication interfaces, (including RS-485, controller area network (CAN), daisy chain, and Ethernet), (...)
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HVSSOP (DGN) 8 Ultra Librarian
WSON (DRV) 6 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片