TPS7N53

現行

3A 高 PSRR 超低壓降線性穩壓器

產品詳細資料

Output options Adjustable Output Iout (max) (A) 3 Vin (max) (V) 2.2 Vin (min) (V) 1.1 Vout (max) (V) 1.5 Vout (min) (V) 0.5 Rating Catalog Noise (µVrms) 2.2 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 15 Thermal resistance θJA (°C/W) 40.3 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start, Thermal shutdown Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 95 Operating temperature range (°C) -40 to 125
Output options Adjustable Output Iout (max) (A) 3 Vin (max) (V) 2.2 Vin (min) (V) 1.1 Vout (max) (V) 1.5 Vout (min) (V) 0.5 Rating Catalog Noise (µVrms) 2.2 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 15 Thermal resistance θJA (°C/W) 40.3 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start, Thermal shutdown Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 95 Operating temperature range (°C) -40 to 125
WQFN (RTE) 16 9 mm² 3 x 3
  • Input voltage range:
    • 1.1V to 2.2V
  • Output voltage noise: 2.2µVRMS
  • 1.5% (max) accuracy over line, load, and temperature
  • Low dropout: 95mV(typ) at 3A
  • Power-supply rejection ratio (3A):
    • 80dB at 1kHz
    • 63dB at 10kHz
    • 51dB at 100kHz
    • 25dB at 1MHz
  • Adjustable output voltage range: 0.5V to 1.5V
  • Adjustable soft-start inrush control
  • Open-drain, power-good (PG) output
  • Package: 3mm × 3mm, 16-pin WQFN
  • Input voltage range:
    • 1.1V to 2.2V
  • Output voltage noise: 2.2µVRMS
  • 1.5% (max) accuracy over line, load, and temperature
  • Low dropout: 95mV(typ) at 3A
  • Power-supply rejection ratio (3A):
    • 80dB at 1kHz
    • 63dB at 10kHz
    • 51dB at 100kHz
    • 25dB at 1MHz
  • Adjustable output voltage range: 0.5V to 1.5V
  • Adjustable soft-start inrush control
  • Open-drain, power-good (PG) output
  • Package: 3mm × 3mm, 16-pin WQFN

The TPS7N53 is a low-noise (2.2µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 3A with only 95mV of dropout (typ), independently of the output voltage. The device output voltage is adjustable from 0.5V to 1.5V using a single external resistor. The combination of low noise, high PSRR, and high output-current capability makes the TPS7N53 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.

Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1.5% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide optimal system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializers/deserializers (SerDes), FPGAs, and DSPs.

The TPS7N53 is a low-noise (2.2µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 3A with only 95mV of dropout (typ), independently of the output voltage. The device output voltage is adjustable from 0.5V to 1.5V using a single external resistor. The combination of low noise, high PSRR, and high output-current capability makes the TPS7N53 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.

Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1.5% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide optimal system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializers/deserializers (SerDes), FPGAs, and DSPs.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPS7A84A 現行 具有電源良好功能的 3-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差電壓穩壓器 This product has 2x lower noise.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS7N53 3A, Low-Input Voltage, Low-Noise, High-Accuracy, Low-Dropout (LDO) Voltage Regulator datasheet (Rev. A) PDF | HTML 2024年 12月 2日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7N53EVM-138 — TPS7N53 評估模組

TPS7N53EVM-138 旨在協助設計工程師評估 TPS7N53 線性穩壓器的運作及性能,以了解是否可在電路應用中使用。此特定 EVM 配置包含適合各種應用的單一低雜訊、高準確度線性穩壓器。穩壓器能以低 VIN 至 VOUT 壓降電壓為負載提供最高 3A。隨附高性能負載暫態電路,可協助使用者進行高速負載暫態測試。在電路板上整合了低電感電流迴路,可協助使用者測量輸入與輸出電流。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 16 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片