產品規格表
TRS3232E-Q1
- Qualified for Automotive Applications
- ESD Protection for RS-232 Bus Pins
- ±15-kV Human Body Model (HBM)
- ±8 kV (IEC61000-4-2, Contact Discharge)
- ±15 kV (IEC61000-4-2, Air-Gap Discharge)
- Meets or Exceeds the Requirements of TIA/EIA-232-F
and ITU v.28 Standards - Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA (Typ)
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Pin Compatible to Alternative High-Speed Device (1 Mbit/s):
TRSF3232E
The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
TIDA-01094 — 適用於隔離式分流電流量測的抗磁場干擾、無變壓器電源參考設計
TIDA-01094 參考設計採用隔離式 ΔΣ 調變器,實作了具有隔離式分流感測器的 0.5 級三相無變壓器電能量測系統。ΔΣ 調變器的輸出電路與輸入電路電容隔離,因此可提供無變壓器資料隔離。各調變器的高壓側皆由同樣無變壓器的電容下降電源供電。由於此設計中未使用變壓器,因此具有固有的磁性耐受性。此外,由於高壓側由主電源獨立供電,而不是從低壓側電源供應器衍生,所以高壓側電容下降電源供應器降低了整體系統成本,且具有固有的低傳導和輻射排放,並減少從低壓側電源供應器汲取的電流消耗。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
TSSOP (PW) | 16 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。