支援軟體
TSD5402-SW — TSD5402 PPC3 GUI
TSD5402 PPC3 GUI
TSD5402-Q1
- AEC-Q100 Qualified for automotive applications
- Temperature grade 1: –40°C to 125°C, TA
- Mono BTL Digital power amplifier
- 8W Output power at 10% THD+N into 4Ω
- 4.5V to 18V Operating range
- 83% Efficiency into 4Ω
- Differential analog input
-
Power Guard protection (adjustable voltage limiter)
- 75dB Power-supply rejection ratio (PSRR)
- Load diagnostic functions:
- Open and shorted output load
- Output-to-power and output-to-ground shorts
- Protection and monitoring functions:
- Short-circuit protection
- 40V Load dump protection per ISO-7637-2
- Output DC Level detection
- Overtemperature protection
- Overvoltage and Undervoltage protection
- Thermally enhanced 16-Pin HTSSOP (PWP) package with PowerPAD™ package (pad down)
- Designed for automotive EMC requirements
- ISO9000: 2002 TS16949 certified
- 40V Load dump protection in standby
- Non-blocking I2C in standby
The TSD5402-Q1 is a class-D sensor driving amplifier, ideal for use in automotive and industrial applications, including, but not limited to: resolver-based motor control, braking systems, electric power steering, servos, and flight control surfaces. The wide operating voltage range and excellent efficiency make the device ideal for applications that require design flexibility. The integrated load-dump protection reduces external voltage clamp cost and size, and the onboard load diagnostics report the status of the load through I2C. The integrated shorted load and open load diagnostics allows systems to avoid external implementations.
索取更多資訊
提供其他設計資源。立即索取
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TSD5402Q1EVM — TSD5402-Q1 評估模組
TSD5402-Q1 評估模組 (EVM) 展示 TSD5402-Q1 類比輸入 D 類閉合迴路放大器。EVM 可做為具有預設 I2C 暫存器設定的獨立平台使用。EVM 以預設 I2C 暫存器設定執行，無需初始化。EVM 也可搭配 PurePath™ Console (PPC3) GUI 外掛程式使用，以編程 I2C 暫存器設定。
計算工具
ANALOG-ENGINEER-CALC — 類比工程師計算機
The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
