UC1825-DIE

Name: UC1825-DIE
Brand: TI
SKU: UC1825-DIE
Price: 494.346 USD

現行

採用 DIE 的航太級、30-V 輸入、1.5-A 雙輸出、1-MHz PWM 控制器

立即訂購

產品規格表

document-pdfAcrobat High-Speed PWM Controller, UC1825-DIE datasheet (英文)

UC1825-DIE

現行

產品規格表

立即訂購

產品詳細資料

Operating temperature range (°C)

25 to 25

Control mode

Current

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Space

Features

Error amplifier, Soft start, Synchronization pin

Duty cycle (max) (%)

80

Operating temperature range (°C)

25 to 25

Control mode

Current

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Space

Features

Error amplifier, Soft start, Synchronization pin

Duty cycle (max) (%)

80

DIESALE (TD)

—

See data sheet

Rad-Tolerant: 30 kRad (Si) TID⁽¹⁾
Compatible With Voltage- or Current-Mode Topologies
Practical Operation Switching Frequencies
50-ns Propagation Delay-to-Output
High-Current Dual Totem Pole Outputs
Wide Bandwidth Error Amplifier
Fully Latched Logic With Double-Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start/Maximum Duty-Cycle Control
Undervoltage Lockout With Hysteresis
Low Start-Up Current

⁽¹⁾ Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

Rad-Tolerant: 30 kRad (Si) TID⁽¹⁾
Compatible With Voltage- or Current-Mode Topologies
Practical Operation Switching Frequencies
50-ns Propagation Delay-to-Output
High-Current Dual Totem Pole Outputs
Wide Bandwidth Error Amplifier
Fully Latched Logic With Double-Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start/Maximum Duty-Cycle Control
Undervoltage Lockout With Hysteresis
Low Start-Up Current

⁽¹⁾ Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

The UC1825-DIE PWM control device is optimized for high-frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty-cycle clamp. The logic is fully latched to provide jitter-free operation and prohibit multiple pulses at an output. An undervoltage lockout section with 800 mV of hysteresis assures low start up current. During undervoltage lockout, the outputs are high impedance.

This device features totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

The UC1825-DIE PWM control device is optimized for high-frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty-cycle clamp. The logic is fully latched to provide jitter-free operation and prohibit multiple pulses at an output. An undervoltage lockout section with 800 mV of hysteresis assures low start up current. During undervoltage lockout, the outputs are high impedance.

This device features totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

filter

尋找其它 AC/DC 和 DC/DC 控制器 (外部 FET)

下載