UC2824

現行

具有 9.2V/8.4V UVLO、80% 工作週期、-40C 至 85C 的 30-V、1.5A 雙端 1MHz PWM 控制器

立即訂購

產品規格表

document-pdfAcrobat High Speed PWM Controller datasheet (Rev. A) (英文)

UC2824

現行

產品規格表

立即訂購

產品詳細資料

Vin (max) (V)

30

Operating temperature range (°C)

-40 to 85

Control mode

Current, Voltage

Topology

Boost

Rating

Catalog

Features

Error amplifier, Soft start, Synchronization pin

Duty cycle (max) (%)

100

Vin (max) (V)

30

Operating temperature range (°C)

-40 to 85

Control mode

Current, Voltage

Topology

Boost

Rating

Catalog

Features

Error amplifier, Soft start, Synchronization pin

Duty cycle (max) (%)

100

PDIP (N)

16

181.42 mm² 19.3 x 9.4

SOIC (DW)

16

106.09 mm² 10.3 x 10.3

Complementary Outputs
Practical Operation Switching Frequencies to 1 MHz
50-ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5 A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic With Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start/Maximum Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1 mA)
Trimmed Bandgap Reference (5.1 V ± 1%)

Complementary Outputs
Practical Operation Switching Frequencies to 1 MHz
50-ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5 A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic With Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start/Maximum Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1 mA)
Trimmed Bandgap Reference (5.1 V ± 1%)

The UC1824 family of PWM control devices is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft-start pin which doubles as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800 mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

The UC1824 family of PWM control devices is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft-start pin which doubles as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800 mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

filter

尋找其它 AC/DC 和 DC/DC 控制器 (外部 FET)

下載