UC2836

現行

36-V 可調整線性電壓穩壓器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能與所比較的裝置相似
LM1085 現行 3-A、29-V 線性電壓穩壓器 Similar product with wider operating temperature range

產品詳細資料

Output options Adjustable Output Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 35 Vout (min) (V) 2.5 Rating Catalog Iq (typ) (mA) 3.7 Thermal resistance θJA (°C/W) 108 Load capacitance (min) (µF) 10 Accuracy (%) 1.2 Operating temperature range (°C) -25 to 85
Output options Adjustable Output Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 35 Vout (min) (V) 2.5 Rating Catalog Iq (typ) (mA) 3.7 Thermal resistance θJA (°C/W) 108 Load capacitance (min) (µF) 10 Accuracy (%) 1.2 Operating temperature range (°C) -25 to 85
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet High Efficiency Regulator Controller datasheet 1999年 9月 5日
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020年 8月 18日
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017年 8月 9日
Application note DN-32 Optocoupler Feedback Drive Techniques 1999年 9月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

UCX836 TINA-TI Average Reference Design

SLUM218.TSC (74 KB) - TINA-TI Reference Design
模擬型號

UCX836 TINA-TI Average Spice Model

SLUM217.ZIP (12 KB) - TINA-TI Spice Model
模擬型號

UCX836 TINA-TI Transient Reference Design

SLUM215.TSC (71 KB) - TINA-TI Reference Design
模擬型號

UCX836 TINA-TI Transient Spice Model

SLUM216.ZIP (12 KB) - TINA-TI Spice Model
模擬型號

UCx836 Family PSpice Average Model

SLUM084.ZIP (124 KB) - PSpice Model
模擬型號

UCx836 Family PSpice Transient Model

SLUM083.ZIP (57 KB) - PSpice Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片