首頁 電源管理 AC/DC 和 DC/DC 控制器 (外部 FET)
首頁
電源管理
AC/DC 和 DC/DC 控制器 (外部 FET)

UCC25706-Q1

最後一次購買

車用 8V 至 15V，最高 4MHz 電壓模式 PWM 控制器

立即訂購
產品規格表

UCC25706-Q1

最後一次購買
產品規格表 立即訂購

產品詳細資料

Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward, Voltage Topology Boost, Flyback, Forward Rating Automotive Duty cycle (max) (%) 93
Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward, Voltage Topology Boost, Flyback, Forward Rating Automotive Duty cycle (max) (%) 93
  • Qualified for Automotive Applications
  • Greater Than 4-MHz Operation
  • Integrated Oscillator / Voltage Feed Forward
    Compensation
  • >4:1 Input Voltage Range
  • 25-ns Current Limit Delay
  • Programmable Maximum Duty Cycle Clamp
  • Optocoupler Interface
  • 50-µA Start-Up Current
  • 4.2-mA Operating Current at 1 MHz
  • Latch-Up Exceeds 100mA per JESD78 Class I
  • Smallest Footprint of the 8-pin MSOP
    Package Minimizes Board Area and Height
  • Qualified for Automotive Applications
  • Greater Than 4-MHz Operation
  • Integrated Oscillator / Voltage Feed Forward
    Compensation
  • >4:1 Input Voltage Range
  • 25-ns Current Limit Delay
  • Programmable Maximum Duty Cycle Clamp
  • Optocoupler Interface
  • 50-µA Start-Up Current
  • 4.2-mA Operating Current at 1 MHz
  • Latch-Up Exceeds 100mA per JESD78 Class I
  • Smallest Footprint of the 8-pin MSOP
    Package Minimizes Board Area and Height

The UCC25705-Q1 and UCC25706-Q1 devices are 8-pin voltage mode primary side controllers with fast over-current protection. These devices are used as core high-speed building blocks in high performance isolated and non-isolated power converters.

UCC25705-Q1/UCC25706-Q1 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25 ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle.

Two UVLO options are offered. The UCC25705-Q1 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC25706-Q1 is better suited for offline applications.

The UCC2570x-Q1 family is offered in an 8-pin SOIC (D) package.

The UCC25705-Q1 and UCC25706-Q1 devices are 8-pin voltage mode primary side controllers with fast over-current protection. These devices are used as core high-speed building blocks in high performance isolated and non-isolated power converters.

UCC25705-Q1/UCC25706-Q1 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25 ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle.

Two UVLO options are offered. The UCC25705-Q1 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC25706-Q1 is better suited for offline applications.

The UCC2570x-Q1 family is offered in an 8-pin SOIC (D) package.
filter 尋找其它 AC/DC 和 DC/DC 控制器 (外部 FET)
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet High-Speed Voltage Mode Pulse Width Modulator - datasheet 2011年 5月 5日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點