Code example or demo
DAC8741H
HART®, FOUNDATION Fieldbus™, and PROFIBUS PA-compliant modem with SPI interface
Data sheet
DAC8741H
- HART-compliant physical layer modem
- 1200-Hz, 2200-Hz HART FSK sinusoids
- Register programmable amplitude of TX signals (DAC8741H only)
- Integrated RX demodulator and band-pass filter with minimal external components
- FOUNDATION Fieldbus compatible H1 controller and medium attachment unit (MAU)
- 31.25 kbit/s communication based on Manchester-coded bus powered (MBP)
- Integrated Manchester encoder and decoder
- Compatible with PROFIBUS PA
- Low quiescent current: 180 µA max at typical industrial operating temperature range (–40°C to +85°C)
- Integrated 1.5-V reference
- Flexible clocking options
- Internal oscillator
- External crystal oscillator
- External CMOS clock
- Digital interface
- DAC8740H: UART
- DAC8741H: SPI
- Reliability: CRC bit error checking, watchdog timer (DAC8741H only)
- Wide operating temperature: –55°C to +125°C
- 4-mm × 4-mm QFN package
The DAC8740H and DAC8741H (DAC874xH) are HART®, FOUNDATION Fieldbus™, and PROFIBUS PA compatible low-power modems designed for industrial process control and industrial-automation applications.
In HART mode, the DAC874xH integrates all of the required circuitry to operate as half-duplex HART physical layer modems, in either slave or master configurations with minimal external components for filtering. In FOUNDATION Fieldbus mode, the DAC874xH integrates all of the required circuitry to operate as half-duplex FOUNDATION Fieldbus compatible H1 controllers and MAUs.
The HART, FOUNDATION Fieldbus, or PROFIBUS PA, data stream can be transferred from the microcontroller through either a UART interface or an integrated FIFO accessed by a SPI interface. The SPI interface includes an SDO pin for daisy-chain support, various interrupts, and other extended features.
Technical documentation
No results found. Please clear your search and try again.
View all 7 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | DAC874xH HART® and FOUNDATION Fieldbus™ and PROFIBUS PA Modems datasheet (Rev. D) | PDF | HTML | 02 May 2019 |
| Application note | Design and Test of a HART-Enabled Field Transmitter for 4-20mA Loops | PDF | HTML | 17 Oct 2024 | |
| Application note | A Basic Guide to the HART Protocol | PDF | HTML | 09 Nov 2023 | |
| Application brief | Designing Foundation Fieldbus and Profibus PA Devices with the DAC874xh Modem Fa | 04 Mar 2019 | ||
| Application brief | Implementing HART in PLC Analog Input Modules for Real-Time Communication | 05 Nov 2018 | ||
| Application brief | Implementing HART in 2-Wire Field Sensor-Transmitters | 03 Oct 2018 | ||
| EVM User's guide | DAC8742H Evaluation Module User's Guide (Rev. A) | 14 Nov 2017 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
DAC8742HEVM — DAC8742H evaluation module
The DAC8742H evaluation module (EVM) is an easy-to-use platform for evaluating the functionality and performance of the DAC8742H device. The DAC8740H, DAC8741H, and DAC8742H are HART®, FOUNDATION Fieldbus™, and PROFIBUS PA-compliant low-power modems designed for industrial (...)
User guide: PDF
Calculation tool
ANALOG-ENGINEER-CALC — Analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool
TINA-TI — SPICE-based analog simulation program
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.