Startseite Energiemanagement AC/DC- und DC/DC-Controller (externer FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Controller (externer FET)

LM2641

NICHT FÜR NEUE DESIGNS EMPFOHLEN

Synchroner Zwei-Kanal-Abwärtsregler, 5,5 bis 30 V Eingangsspannung, 300 kHz, mit DCAP2-Modus und LDO

Jetzt bestellen
Datenblatt
LM2641 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TPS56837 AKTIV Synchroner Abwärtswandler, 4,5-V- bis 28-V-Eingangsspannung, 8-A-Ausgangsstrom Higher power density integrated FET converter solution for up to 8A output current

LM2641

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Vin (min) (V) 5.5 Vin (max) (V) 30 Iout (max) (A) 5 Operating temperature range (°C) 0 to 0 Control mode current mode Topology Buck Rating Catalog Vout (min) (V) 2.2 Vout (max) (V) 6 Features Enable, Frequency synchronization, Light Load Efficiency, Power good Iq (typ) (µA) 600 Duty cycle (max) (%) 98 Number of phases 1
Vin (min) (V) 5.5 Vin (max) (V) 30 Iout (max) (A) 5 Operating temperature range (°C) 0 to 0 Control mode current mode Topology Buck Rating Catalog Vout (min) (V) 2.2 Vout (max) (V) 6 Features Enable, Frequency synchronization, Light Load Efficiency, Power good Iq (typ) (µA) 600 Duty cycle (max) (%) 98 Number of phases 1
TSSOP (PW) 28 62.08 mm² 9.7 x 6.4
  • 300 kHz Fixed-Frequency Switching
  • Switching Synchronization with an External Signal up to 400 kHz
  • Optional Pulse-Skipping Mode
  • Adjustable Secondary Feedback
  • Input Undervoltage Lockout
  • Output Undervoltage Shutdown Protection
  • Output Overvoltage Shutdown Protection
  • Programmable Soft-Start (Each Controller)
  • 5V, 50 mA Linear Regulator Output
  • Precision 2.5V Reference Output
  • 28-pin TSSOP

Key Specifications

  • 96 % Efficient
  • 5.5 – 30 V Input Range
  • Dual Outputs Adjustable from 2.2 – 8 V
  • 0.5 % Typical Load Regulation Error
  • 0.002 %/V Typical Line Regulation Error

All trademarks are the property of their respective owners.

  • 300 kHz Fixed-Frequency Switching
  • Switching Synchronization with an External Signal up to 400 kHz
  • Optional Pulse-Skipping Mode
  • Adjustable Secondary Feedback
  • Input Undervoltage Lockout
  • Output Undervoltage Shutdown Protection
  • Output Overvoltage Shutdown Protection
  • Programmable Soft-Start (Each Controller)
  • 5V, 50 mA Linear Regulator Output
  • Precision 2.5V Reference Output
  • 28-pin TSSOP

Key Specifications

  • 96 % Efficient
  • 5.5 – 30 V Input Range
  • Dual Outputs Adjustable from 2.2 – 8 V
  • 0.5 % Typical Load Regulation Error
  • 0.002 %/V Typical Line Regulation Error

All trademarks are the property of their respective owners.

The LM2641 is a dual step-down power supply controller intended for application in notebook personal computers and other battery-powered equipment.

Fixed-frequency synchronous drive of logic-level N-channel power MOSFETs is combined with an optional pulse-skipping mode to achieve ultra efficient power conversion over a 1000:1 load current range. The pulse-skipping mode can be disabled in favor of fixed-frequency operation regardless of the load current level.

High DC gain and current-mode feedback control assure excellent line and load regulation and a wide loop bandwidth for fast response to dynamic loads.

An internal oscillator fixes the switching frequency at 300 kHz. Optionally, switching can be synchronized to an external clock running as fast as 400 kHz.

An optional soft-start feature limits current surges from the input power supply at start up and provides a simple means of start-up sequencing.

Logic-level inputs allow the controllers to be turned ON and OFF separately.

The LM2641 is a dual step-down power supply controller intended for application in notebook personal computers and other battery-powered equipment.

Fixed-frequency synchronous drive of logic-level N-channel power MOSFETs is combined with an optional pulse-skipping mode to achieve ultra efficient power conversion over a 1000:1 load current range. The pulse-skipping mode can be disabled in favor of fixed-frequency operation regardless of the load current level.

High DC gain and current-mode feedback control assure excellent line and load regulation and a wide loop bandwidth for fast response to dynamic loads.

An internal oscillator fixes the switching frequency at 300 kHz. Optionally, switching can be synchronized to an external clock running as fast as 400 kHz.

An optional soft-start feature limits current surges from the input power supply at start up and provides a simple means of start-up sequencing.

Logic-level inputs allow the controllers to be turned ON and OFF separately.
filter Andere AC/DC- und DC/DC-Controller (externer FET) suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet LM2641 Dual Adjustable Step-Down Switching Power Supply Controller datasheet (Rev. B) 03 Apr 2013

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort