SN55LVCP22A-SP

Name: SN55LVCP22A-SP
Brand: TI
SKU: SN55LVCP22A-SP
Price: 1750 USD

AKTIV

LVDS-Crosspoint-Switch der QML-Klasse V 2×2, 1 Gbit/s mit RHA

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN55LVCP22A-SP QML Class V 2×2 1-Gbps LVDS Crosspoint Switch datasheet (Englisch) PDF | HTML

SN55LVCP22A-SP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Supply voltage (V)

3.3

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

BLVDS, LVCMOS, LVDS, LVTTL

Rating

Space

Operating temperature range (°C)

-55 to 125

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Supply voltage (V)

3.3

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

BLVDS, LVCMOS, LVDS, LVTTL

Rating

Space

Operating temperature range (°C)

-55 to 125

CFP (W)

16

69.319 mm² 10.3 x 6.73

QML class V, RHA, SMD 5962-11242
Radiation performance
- RHA to 100 krad(Si)
- ELDRS free to 100 krad(Si)
- SEL immune to LET = 75 MeV⋅cm²/mg
- SEE characterized to LET = 75 MeV⋅cm²/mg
High-speed (up to 1000 Mbps)
Low-jitter fully differential data path
50 ps (typ), of peak-to-peak jitter with PRBS = 2²³–1 pattern
Less than 227 mW (typ), 313 mW (max) total power dissipation
Output (channel-to-channel) skew is 80 ps (typ)
Configurable as 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter
Inputs accept LVDS, LVPECL, and CML signals
Fast switch time of 1.7 ns (typ)
Fast propagation delay of 0.65 ns (typ)
Inter-operates with TIA/EIA-644-A LVDS standard
Supports defense, aerospace, and medical applications:
- Controlled baseline
- One assembly/test site and one fabrication site
- Extended product life cycle and extended product-change notification
- Product traceability

QML class V, RHA, SMD 5962-11242
Radiation performance
- RHA to 100 krad(Si)
- ELDRS free to 100 krad(Si)
- SEL immune to LET = 75 MeV⋅cm²/mg
- SEE characterized to LET = 75 MeV⋅cm²/mg
High-speed (up to 1000 Mbps)
Low-jitter fully differential data path
50 ps (typ), of peak-to-peak jitter with PRBS = 2²³–1 pattern
Less than 227 mW (typ), 313 mW (max) total power dissipation
Output (channel-to-channel) skew is 80 ps (typ)
Configurable as 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter
Inputs accept LVDS, LVPECL, and CML signals
Fast switch time of 1.7 ns (typ)
Fast propagation delay of 0.65 ns (typ)
Inter-operates with TIA/EIA-644-A LVDS standard
Supports defense, aerospace, and medical applications:
- Controlled baseline
- One assembly/test site and one fabrication site
- Extended product life cycle and extended product-change notification
- Product traceability

The SN55LVCP22A-SP is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN55LVCP22A-SP provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2×2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN55LVCP22A-SP provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems.

The SN55LVCP22A-SP uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to- channel skew is 80 ps (typ) to ensure accurate alignment of outputs in all applications.

The SN55LVCP22A-SP is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN55LVCP22A-SP provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2×2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN55LVCP22A-SP provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault-tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems.

The SN55LVCP22A-SP uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to- channel skew is 80 ps (typ) to ensure accurate alignment of outputs in all applications.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 8

	Typ	Titel		Datum
*	Data sheet	SN55LVCP22A-SP QML Class V 2×2 1-Gbps LVDS Crosspoint Switch datasheet	PDF \| HTML	29 Mai 2020
*	Radiation & reliability report	SN55LVCP22A-SP Total Ionizing Dose (TID) Lookahead		06 Feb 2021
*	SMD	SN55LVCP22A-SP SMD 5962-11242		08 Jul 2016
	Application brief	DLA Approved Optimizations for QML Products (Rev. A)	PDF \| HTML	05 Jun 2024
	Selection guide	TI Space Products (Rev. J)		12 Feb 2024
	More literature	TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A)		31 Aug 2023
	Application note	Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A)	PDF \| HTML	17 Nov 2022
	Application note	Single-Event Effects Confidence Interval Calculations (Rev. A)	PDF \| HTML	19 Okt 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

SN55LVCP22EVM-CVAL — SN55LVCP22-SP-Evaluierungsmodul

The SN55LVCP22 (LVDS output) is a high-speed 2x2 crosspoint switch. The four different functions that this crosspoint provides are shown below. The functions are selected via pins SEL0 and SEL1. Control pins EN0 and EN1 enable or disable the outputs. The receiver has a wide input common-mode (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
CFP (W)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SN55LVCP22A-SP

LVDS-Crosspoint-Switch der QML-Klasse V 2×2, 1 Gbit/s mit RHA

SN55LVCP22A-SP

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

SN55LVCP22EVM-CVAL — SN55LVCP22-SP-Evaluierungsmodul

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos