Adaptive cable equalizer with integrated reclocker
Supports ST-2082-1(12G), ST-2081-1(6G), ST-424(3G), ST-292(HD), and ST-259(SD)
Compatible with DVB-ASI and AES10 (MADI)
Integrated referenceless reclocker locks to SMPTE rates: 11.88Gbps, 5.94Gbps, 2.97Gbps, 1.485Gbps, or divide-by-1.001 sub-rates, 270Mbps
Typical cable reach (Belden 1694A), PRBS-9 pattern:
- 100m at 11.88Gbps (4Kp60 UHD)
- 150m at 5.94Gbps (UHD)
- 220m at 2.97Gbps (FHD)
- 300m at 1.485Gbps (HD)
- 600m at 270Mbps (SD)
Typical cable reach (Belden 1694A), pathological pattern⁽¹⁾:
- 90m at 11.88Gbps (4Kp60 UHD)
- 140m at 5.94Gbps (UHD)
- 220m at 2.97Gbps (FHD)
- 300m at 1.485Gbps (HD)
- 600m at 270Mbps (SD)
On-chip 75Ω termination and return loss compensation network
Input cable equalizer and reclocker features:
- Improved cable reach with stress patterns
- Programmable CDR loop bandwidth settings
- 2:1 75Ω input mux (LMH1239 only)
Output driver features:
- 1:2 100Ω fanout output with de-emphasis
- Reclocked 75Ω loop-through output with cable fault detection (up to 600m)
Built-in PRBS generator and checker
Internal eye opening monitor
Single 2.5V supply
Low power: 350mW (typical)
Power Save mode: 70mW
Configurable by control pins, SPI, or SMBus interface
5mm × 5mm 32-pin WQFN package
Operating temperature range: –40°C to +85°C

⁽¹⁾For details about SDI pathological implementation, refer to A Study of the SDI Pathological Data Pattern application note

Adaptive cable equalizer with integrated reclocker
Supports ST-2082-1(12G), ST-2081-1(6G), ST-424(3G), ST-292(HD), and ST-259(SD)
Compatible with DVB-ASI and AES10 (MADI)
Integrated referenceless reclocker locks to SMPTE rates: 11.88Gbps, 5.94Gbps, 2.97Gbps, 1.485Gbps, or divide-by-1.001 sub-rates, 270Mbps
Typical cable reach (Belden 1694A), PRBS-9 pattern:
- 100m at 11.88Gbps (4Kp60 UHD)
- 150m at 5.94Gbps (UHD)
- 220m at 2.97Gbps (FHD)
- 300m at 1.485Gbps (HD)
- 600m at 270Mbps (SD)
Typical cable reach (Belden 1694A), pathological pattern⁽¹⁾:
- 90m at 11.88Gbps (4Kp60 UHD)
- 140m at 5.94Gbps (UHD)
- 220m at 2.97Gbps (FHD)
- 300m at 1.485Gbps (HD)
- 600m at 270Mbps (SD)
On-chip 75Ω termination and return loss compensation network
Input cable equalizer and reclocker features:
- Improved cable reach with stress patterns
- Programmable CDR loop bandwidth settings
- 2:1 75Ω input mux (LMH1239 only)
Output driver features:
- 1:2 100Ω fanout output with de-emphasis
- Reclocked 75Ω loop-through output with cable fault detection (up to 600m)
Built-in PRBS generator and checker
Internal eye opening monitor
Single 2.5V supply
Low power: 350mW (typical)
Power Save mode: 70mW
Configurable by control pins, SPI, or SMBus interface
5mm × 5mm 32-pin WQFN package
Operating temperature range: –40°C to +85°C

⁽¹⁾For details about SDI pathological implementation, refer to A Study of the SDI Pathological Data Pattern application note

The LMH12x9 (LMH1229, LMH1239) is a long reach adaptive cable equalizer with integrated reclocker, dual outputs, and 75Ω loop-through output. The device is designed to equalize data transmitted over 75Ω coaxial cable and operates across SMPTE data rates ranging from 125Mbps to 11.88Gbps.

The adaptive equalizer at the SDI input enables automatic loss compensation for up to 100m Belden 1694A cable reach in 4K/8K video applications where 12G-SDI (11.88Gbps) is used. The integrated reclocker attenuates high frequency jitter and fully regenerates the data using a clean, low-jitter clock. The loop filter of the reclocker is adjustable with optional external capacitor to reduce the CDR loop bandwidth.

For routing simplicity and debug, the LMH12x9 features a 1:3 output mux consisting of two 100Ω fanouts with VOD and de-emphasis control and one 75Ω loop-through SDI output. The 75Ω loop-through output is provided to extend the signal reach or enable system-level diagnostics.

The LMH12x9 features internal integrated return loss networks that meet stringent SMPTE specifications across all data rates. The LMH12x9 also has an internal eye opening monitor and a programmable pin for CDR lock indication, input carrier detect, cable fault detection, or hardware interrupts to support system diagnostics and board bring-up.

The LMH1229 is pin compatible with the LMH1297 (12G UHD-SDI bidirectional I/O with integrated reclocker) when used in cable equalizer applications. For system-level redundancy, the LMH1239 is offered with an additional integrated SDI input mux.

The LMH12x9 (LMH1229, LMH1239) is a long reach adaptive cable equalizer with integrated reclocker, dual outputs, and 75Ω loop-through output. The device is designed to equalize data transmitted over 75Ω coaxial cable and operates across SMPTE data rates ranging from 125Mbps to 11.88Gbps.

The adaptive equalizer at the SDI input enables automatic loss compensation for up to 100m Belden 1694A cable reach in 4K/8K video applications where 12G-SDI (11.88Gbps) is used. The integrated reclocker attenuates high frequency jitter and fully regenerates the data using a clean, low-jitter clock. The loop filter of the reclocker is adjustable with optional external capacitor to reduce the CDR loop bandwidth.

For routing simplicity and debug, the LMH12x9 features a 1:3 output mux consisting of two 100Ω fanouts with VOD and de-emphasis control and one 75Ω loop-through SDI output. The 75Ω loop-through output is provided to extend the signal reach or enable system-level diagnostics.

The LMH12x9 features internal integrated return loss networks that meet stringent SMPTE specifications across all data rates. The LMH12x9 also has an internal eye opening monitor and a programmable pin for CDR lock indication, input carrier detect, cable fault detection, or hardware interrupts to support system diagnostics and board bring-up.

The LMH1229 is pin compatible with the LMH1297 (12G UHD-SDI bidirectional I/O with integrated reclocker) when used in cable equalizer applications. For system-level redundancy, the LMH1239 is offered with an additional integrated SDI input mux.

filter

기타 직렬 디지털 인터페이스(SDI) IC 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

2개 모두 보기

	유형	직함		날짜
*	Data sheet	LMH12x9 12G UHD Long Reach Cable Equalizer with Integrated Reclocker datasheet (Rev. A)	PDF \| HTML	2024/10/01
	Application note	A Study of the SDI Pathological Data Pattern	PDF \| HTML	2024/09/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMH1239EVM — LMH1239 평가 모듈

LMH1239는 리클로커, 듀얼 입력, 듀얼 출력 및 75Ω 루프 스루 출력이 통합된 긴 리치 적응형 케이블 이퀄라이저입니다. 이 디바이스는 75Ω 동축 케이블을 통해 전송되는 데이터를 이퀄라이징하도록 설계되었으며 125Mbps~11.88Gbps 범위의 SMPTE 데이터 속도로 작동합니다. SDI 입력의 적응형 이퀄라이저는 12G-SDI(11.88Gbps)가 사용되는 4K 및 8K 비디오 애플리케이션에서 최대 100m Belden1694A 케이블 길이에 대한 자동 손실 보상이 가능합니다. 통합 리클로커가 고주파 지터를 감쇠시키고 (...)

사용 설명서: PDF | HTML

TI.com에서 구매 불가

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)

요청

시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

사용 설명서: PDF

View Options

패키지	핀	CAD 기호, 풋프린트 및 3D 모델
WQFN (RTV)	32	Ultra Librarian

TI의 평가 항목에 대한 표준 약관이 적용됩니다.

LMH1239

리클로커 내장 12G SDI 듀얼 케이블 이퀄라이저

LMH1239

제품 상세 정보

기술 자료

설계 및 개발

LMH1239EVM — LMH1239 평가 모듈

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

비디오 시리즈

동영상