패키징 정보
| 패키지 | 핀 VQFN (RGE) | 24 |
| 작동 온도 범위(°C) -40 to 125 |
| 패키지 수량 | 캐리어 3,000 | LARGE T&R |
TPS25740B의 주요 특징
- USB PD 2.0 Certified (TID# 1030004) and USB PD 3.0 Compliant Provider
- Pin-Selectable Voltage Advertisement
- 5 V, 9 V, 12 V, and 15 V
- 5 V, 9 V, 15 V, and 20 V
-
Pin-Selectable Peak Power Settings
- 8 Options 18 W – 100 W
- High Voltage and Safety Integration
- Overvoltage, Overcurrent, Overtemperature Protection and VBUS Discharge
- IEC 61000-4-2 Protection on CC1 and CC2
- Input Pin for Fast Shutdown Under Fault
- Control of External N-ch MOSFET
- 3-Pin External Power Supply Control
- Wide VIN Supply (4.65 V – 25 V)
- Below 10 µA Quiescent Current When Unattached
- Port Attachment Indicator
- Self-Directed Port Power Management for Dual-Port Applications
TPS25740B에 대한 설명
The TPS25740B, a fully compliant
and USB Power Delivery (PD) 2.0 certified solution, implements a power source for USB
Type-C™ PD. It is easy to use and minimizes
time to market because there is no firmware or external microcontroller required, just connect it
to the board. The device offers four voltages with a maximum voltage and power up to
20 V at 100 W. The TPS25740B automatically handles all USB PD negotiations, handshakes using
the CC pins, and selects the voltage from the power supply using the CTLx pins. The PCTRL pin
allows for dynamically reducing the amount of power advertised to enable port power management. The
TPS25740B integrates functions such as OVP, OCP, ESD, UVLO, OTSD, and VBUS discharge to help save
solution size and cost while enabling a safe and robust design. The TPS25740B controls an N-ch
MOSFET for the VBUS switch, saving system cost versus solutions that require a P-ch MOSFET. The
ultra-low standby power of the TPS25740B makes it easier to pass energy efficiency standards and
extends battery life in mobile applications.
The TPS25740B typically draws 8.5 µA (or 5.8 µA if VDD = 3.3 V) when no device is attached. Additional system power saving is achievable by using the Port Attachment Indicator (DVDD) output to disable the power source when no device is attached.
Protection features include overvoltage protection, overcurrent protection, over-temperature protection, IEC for CC pins, and system override to disable the gate driver (GD).