TPS552882
- Wide input and output voltage range
- Wide input voltage range: 2.7 V to 36 V
- Wide output voltage range: 0.8 V to 22 V
- High efficiency over entire load range
- 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
- Programmable PFM and FPWM mode at light load
- Avoid frequency interference and crosstalk
- Optional clock synchronization
- Programmable switching frequency from 200 kHz to 2.2 MHz
- EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
- Rich protection features
- Output overvoltage protection
- Hiccup mode for output short-circuit protection
- Thermal shutdown protection
- Programmable average inductor current limit up to 16 A
- Small solution size
- Maximum switching frequency up to 2.2 MHz
- 4.0-mm × 3.5-mm HotRod™ QFN package
- Adjustable output voltage compensation for voltage droop over the cable
- Programmable output current limit by sensing resistor
- ±5% accurate output current monitoring
- ±1% reference voltage accuracy
- Fixed 4-ms soft-start time
- Create a custom design using the TPS552882 with the WEBENCH Power Designer
The TPS552882 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882 operates over a 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.
The TPS552882 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882 uses an external resistor divider to set the output voltage with 1.2V internal reference voltage. The TPS552882 is capable of delivering 100 W from 12-V input voltage.
The TPS552882 employs average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882 also provides optional spread spectrum to minimize peak EMI.
The TPS552882 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS552882 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.
The TPS552882 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm HotRod QFN package.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS552882 36-V, 16-A Buck-boost Converter datasheet | PDF | HTML | 2020/11/17 |
Application note | TPS55288 벅-부스트 컨버터를 사용하여 낮은 EMI를 달성하는 방법 | PDF | HTML | 2022/10/28 | |
Application note | Measuring and Understanding the Output Voltage Ripple of a Boost Converter | PDF | HTML | 2021/02/22 | |
Application note | TPS55288 Layout Guideline (Rev. B) | PDF | HTML | 2020/12/20 | |
EVM User's guide | TPS552882EVM-400kHz Evaluation Module (Rev. A) | PDF | HTML | 2020/11/24 | |
Certificate | TPS552882EVM-2MHz EU Declaration of Conformity (DoC) | 2020/09/14 | ||
Certificate | TPS552882EVM-400kHz EU Declaration of Conformity (DoC) | 2020/09/14 | ||
Application brief | USB Type C Power Delivery Source with TPS65987 and TPS55288 | PDF | HTML | 2020/03/06 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS552882EVM-2MHZ — TPS552882 36V, 16A 벅-부스트 컨버터 비 I2C 평가 모듈
TPS552882EVM-400KHZ — TPS552882 400kHz 작동 주파수, 비 I2C 벅-부스트 컨버터 평가 모듈
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN-HR (RPM) | 26 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치