TPS61288
- 2.5-mm × 3.0-mm QFN package with HotRod™ Lite option
- TPS61288 HotRod
- TPS61288L HotRod Lite
- TPS61288L is recommended with thermal improvement
- Wide input voltage and output voltage range
- VIN : 2.0 V to 18 V
- 2.4-V Minimum input voltage for start-up
- VOUT : 4.5 V to 18 V
- High efficiency and power capability
- 15-A peak switch current limit
- Two 6.5-mΩ (LS) / 8.5-mΩ (HS) MOSFETs
- Switching frequency: 500 kHz
- Up to 94.7% efficiency at VIN = 3.6 V, VOUT = 13 V, and IOUT = 2 A
- Up to 96.9% efficiency at VIN = 7.2 V, VOUT = 16 V, and IOUT = 2.5 A
- Extend the system operating time
- Typical 110-µA quiescent current into VOUT pin
- Maximum 2.1-µA current into VIN pin during shutdown
-
Smooth on-time/off-time (SOO) modulation at light load and low duty cycle and no DC offset between PFM and PWM
- Rich protection
- Output overvoltage protection at 19 V
- Cycle-by-cycle overcurrent protection
- Thermal shutdown
The TPS61288 is a high-power density, fully-integrated synchronous boost converter with a 6.5-mΩ power switch and a 8.5-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61288 has a wide input voltage range from 2 V (2.4 V rising) to 18 V to support applications with single-cell or two-cell Lithium batteries. The device has 15-A switch current capability and is capable of providing an output voltage up to 18 V.
The TPS61288 employs peak current control topology with SOO modulation to regulate the output voltage. The device operates in the pulse width modulation (PWM) mode in moderate to heavy load condition. It automatically runs in the pulse frequency modulation (PFM) mode in light load and low duty cycle condition. SOO modulation realizes accurate regulation over wide load/VIN range while maintaining high efficiency and low output ripple. The switching frequency in the PWM mode is 500 kHz. The TPS61288 provides 19-V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
The TPS61288 is available in a 2.5-mm × 3.0-mm QFN package.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS61288EVM-064 — TPS61288 18V, 15A 스위치 전류 동기 부스트용 평가 모듈
TPS61288은 18V, 15A 동기 부스트 컨버터입니다. TPS61288은 다음과 같이 낮은 온 저항의 두 가지 전원 FET를 통합합니다. 6.5mΩ 스위칭 FET 및 8.5mΩ 정류기 FET.
2.0V(2.4V 상승)에서 18V의 넓은 입력 전압은 단일 셀 리튬 이온 배터리, 멀티 셀 리튬 이온 배터리 또는 조정된 3.3V, 5V 및 12V 전원 레일로 구동되는 일반적인 애플리케이션을 지원합니다.
PMP40909 — 3.3V~4.2V 입력, 12V, 60W 피크 출력 전력 부스트 컨버터 레퍼런스 설계
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN-HR (RQQ) | 11 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치