전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS61372

활성

부하 분리 기능을 갖춘 16V/3.6A 동기 부스트

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 5 Switching frequency (min) (kHz) 1350 Switching frequency (max) (kHz) 1650 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 5 Vout (max) (V) 15 Iq (typ) (µA) 74 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 3.6
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 5 Switching frequency (min) (kHz) 1350 Switching frequency (max) (kHz) 1650 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 5 Vout (max) (V) 15 Iq (typ) (µA) 74 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 3.6
DSBGA (YKB) 16 1.96 mm² 1.4 x 1.4
  • Input voltage range: 2.5 V to 5.5 V
  • Output voltage range: up to 16 V
  • On-resistance:
    • Low-side FET - 33 mΩ
    • High-side FET - 104 mΩ
  • Switch peak current limit: 3.8 A
  • Quiescent current from VIN: 74 µA
  • Quiescent current from VOUT: 10 µA
  • Shutdown current from VIN: 1 µA
  • Switching frequency: 1.5 MHz
  • Soft-start time: 0.9 ms
  • Hiccup output short protection
  • Auto PFM and forced PWM selectable
  • Load disconnect during shutdown
  • External loop compensation
  • Output overvoltage protection
  • 1.57-mm × 1.52-mm × 0.5 mm 16-pin WCSPs
  • Create a custom design using the TPS61372 with WEBENCH Power Designer
  • Input voltage range: 2.5 V to 5.5 V
  • Output voltage range: up to 16 V
  • On-resistance:
    • Low-side FET - 33 mΩ
    • High-side FET - 104 mΩ
  • Switch peak current limit: 3.8 A
  • Quiescent current from VIN: 74 µA
  • Quiescent current from VOUT: 10 µA
  • Shutdown current from VIN: 1 µA
  • Switching frequency: 1.5 MHz
  • Soft-start time: 0.9 ms
  • Hiccup output short protection
  • Auto PFM and forced PWM selectable
  • Load disconnect during shutdown
  • External loop compensation
  • Output overvoltage protection
  • 1.57-mm × 1.52-mm × 0.5 mm 16-pin WCSPs
  • Create a custom design using the TPS61372 with WEBENCH Power Designer

The TPS61372 is a full-integrated synchronous boost converter with the load disconnect built-in. The device supports output voltage up to 16 V with a 3.8-A current limit. The input voltage ranges from 2.5-V to 5.5-V supporting applications powered by a single-cell Lithium-ion battery or 5-V bus.

The TPS61372 uses the peak current mode with the adaptive off-time control topology. The device works in PWM operation of 1.5 MHz at moderate-to-heavy loads. At the light load conditions, the device can be configured in either auto PFM or forced PWM operation by the MODE pin connection. Auto PFM mode has the benefit of high efficiency at light load while forced PWM operation keeps the switching frequency constant across the whole load range. The TPS61372 has a soft start to minimize the inrush current during start-up. The TPS61372 features of the load disconnect during shut down and provides a output short protection of hiccup mode. In addition, the device implements output overvoltage and thermal shutdown protection. The TPS61372 delivers a compact solution size with a 16-pin WCSP 1.57-mm × 1.52-mm package of 0.5-mm height.

The TPS61372 is a full-integrated synchronous boost converter with the load disconnect built-in. The device supports output voltage up to 16 V with a 3.8-A current limit. The input voltage ranges from 2.5-V to 5.5-V supporting applications powered by a single-cell Lithium-ion battery or 5-V bus.

The TPS61372 uses the peak current mode with the adaptive off-time control topology. The device works in PWM operation of 1.5 MHz at moderate-to-heavy loads. At the light load conditions, the device can be configured in either auto PFM or forced PWM operation by the MODE pin connection. Auto PFM mode has the benefit of high efficiency at light load while forced PWM operation keeps the switching frequency constant across the whole load range. The TPS61372 has a soft start to minimize the inrush current during start-up. The TPS61372 features of the load disconnect during shut down and provides a output short protection of hiccup mode. In addition, the device implements output overvoltage and thermal shutdown protection. The TPS61372 delivers a compact solution size with a 16-pin WCSP 1.57-mm × 1.52-mm package of 0.5-mm height.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS61046 활성 WCSP 패키지의 28V 출력 전압 부스트 컨버터 TPS61046 is non-sync device with Schottky diode first

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet TPS61372 16-V, 3.8-A Synchronous Boost With Load Disconnect datasheet (Rev. B) PDF | HTML 2021/01/07
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 2021/03/22
Technical article How to speed SSD program time with a boost converter PDF | HTML 2018/11/05
Application note Designing Boost Converter TPS61372 in Low Power Application Report 2018/10/09
EVM User's guide TPS61372EVM-033 Evaluation Board User's Guide PDF | HTML 2018/04/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS61372EVM-033 — TPS61372YKB 평가 보드

The TPS61372 is a full-integrated synchronous boost converter with the short protection and load disconnect built-in. The device could support output voltage up to 16 V with 3.6-A current limit. The input voltage ranges from 2.5 V to 5.0 V. The evaluation board is built to evaluate the TPS61372 at (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS61372 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCR3A.ZIP (81 KB) - PSpice Model
계산 툴

SLVRBF6 TPS61372 Quickstart Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS61372 부하 분리 기능을 갖춘 16V/3.6A 동기 부스트
레퍼런스 디자인

TIDA-050028 — 솔리드 스테이트 드라이브 모듈을 위한 eFuse를 사용하는 VBus 보호 레퍼런스 설계

The TIDA-050028 reference design provides the front end protection of a SSD module and showcases the fully featured power tree for standard 3.3-V, 1.8-V, and 1.5-V rails. This size optimized design helps customers with appropriate selection of the integrated circuit protection device, load (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YKB) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상