TPS62877-Q1

Name: TPS62877-Q1
Brand: TI
SKU: TPS62877-Q1
Price: 3.02 USD

활성

오토모티브 2.7V ~ 6V 입력, 30A, 스택형 동기식 벅 컨버터

지금 주문

데이터 시트

document-pdfAcrobat TPS6287x-Q1 2.7V to 6V Input, 15A, 20A, 25A, and 30A Automotive, Fast Transient, Synchronous Step-Down Converter With I2 C Interface datasheet (Rev. C) (영어) PDF | HTML

TPS62877-Q1

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

30

Vin (min) (V)

2.7

Vin (max) (V)

6

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

3000

Features

Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, UVLO, Wettable flanks package

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

1.675

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

30

Vin (min) (V)

2.7

Vin (max) (V)

6

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

3000

Features

Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, UVLO, Wettable flanks package

Control mode

DCS-Control

Vout (min) (V)

0.4

Vout (max) (V)

1.675

WQFN-FCRLF (RZV)

24

12.3525 mm² 3.05 x 4.05

AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to 125°C TA
- –40°C to 150°C junction temperature range
Functional Safety-Capable
- Documentation available to aid functional safety system design
Input voltage range: 2.7V to 6V
Family of pin-to-pin compatible devices: 15A, 20A, 25A, and 30A
Three selectable output voltage ranges from 0.4V to 1.675V
- 0.4V to 0.71875V with 1.25mV steps
- 0.4V to 1.0375V with 2.5mV steps
- 0.4V to 1.675V with 5mV steps
Output voltage accuracy: ±0.8%
Internal power MOSFETs: 2.6mΩ and 1.5mΩ
Adjustable soft start
External compensation
Selectable start-up output voltage through the VSEL pin
Selectable switching frequency of 1.5MHz, 2.25MHz, 2.5MHz, or 3MHz through FSEL pin
Forced PWM or power save mode operation
Start-up output voltage selection by external resistor or I2C
I2C-compatible interface with up to 3.4MHz
Optional stacked operation for increased output current capability
Differential remote sense
Thermal pre-warning and thermal shutdown
Output discharge
Optional spread spectrum clocking
Power-good output with window comparator

AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to 125°C TA
- –40°C to 150°C junction temperature range
Functional Safety-Capable
- Documentation available to aid functional safety system design
Input voltage range: 2.7V to 6V
Family of pin-to-pin compatible devices: 15A, 20A, 25A, and 30A
Three selectable output voltage ranges from 0.4V to 1.675V
- 0.4V to 0.71875V with 1.25mV steps
- 0.4V to 1.0375V with 2.5mV steps
- 0.4V to 1.675V with 5mV steps
Output voltage accuracy: ±0.8%
Internal power MOSFETs: 2.6mΩ and 1.5mΩ
Adjustable soft start
External compensation
Selectable start-up output voltage through the VSEL pin
Selectable switching frequency of 1.5MHz, 2.25MHz, 2.5MHz, or 3MHz through FSEL pin
Forced PWM or power save mode operation
Start-up output voltage selection by external resistor or I2C
I2C-compatible interface with up to 3.4MHz
Optional stacked operation for increased output current capability
Differential remote sense
Thermal pre-warning and thermal shutdown
Output discharge
Optional spread spectrum clocking
Power-good output with window comparator

The TPS62874-Q1, TPS62875-Q1, TPS62876-Q1 and TPS62877-Q1 are a family of pin-to-pin, 15A, 20A, 25A, and 30A synchronous step-down DC/DC converters with I2C interface and differential remote sense. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 30A output current at high ambient temperature. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x-Q1 family implements an enhanced DCS-control scheme that combines fast transient response with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves ±0.8% DC voltage accuracy for the full output voltage range.

The switching frequency is selectable through the FSEL pin, and can be set to 1.5MHz, 2.25MHz, 2.5MHz or 3MHz, or synchronized to an external clock in the same frequency range.

The I2C compatible interface offers several control, monitoring and warning features, such as voltage monitoring and temperature related warnings. The output voltage can be quickly adjusted to adapt the load´s power consumption to the performance needs. The default start-up voltage is resistor selectable through the VSEL pin.

The TPS62874-Q1, TPS62875-Q1, TPS62876-Q1 and TPS62877-Q1 are a family of pin-to-pin, 15A, 20A, 25A, and 30A synchronous step-down DC/DC converters with I2C interface and differential remote sense. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 30A output current at high ambient temperature. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x-Q1 family implements an enhanced DCS-control scheme that combines fast transient response with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves ±0.8% DC voltage accuracy for the full output voltage range.

The switching frequency is selectable through the FSEL pin, and can be set to 1.5MHz, 2.25MHz, 2.5MHz or 3MHz, or synchronized to an external clock in the same frequency range.

The I2C compatible interface offers several control, monitoring and warning features, such as voltage monitoring and temperature related warnings. The output voltage can be quickly adjusted to adapt the load´s power consumption to the performance needs. The default start-up voltage is resistor selectable through the VSEL pin.

filter

기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

26개 모두 보기

	유형	직함		날짜
*	Data sheet	TPS6287x-Q1 2.7V to 6V Input, 15A, 20A, 25A, and 30A Automotive, Fast Transient, Synchronous Step-Down Converter With I2 C Interface datasheet (Rev. C)	PDF \| HTML	2024/10/04
	Product overview	Mobileye EyeQ™6H – Discrete Power Tree	PDF \| HTML	2024/11/07
	Application brief	Increasing Further Data Rates Using High-Current Power Converters in Optical Modules	PDF \| HTML	2024/09/26
	Test report	Power Delivery Reference Design for AMD Versal™ AI Edge Series	PDF \| HTML	2024/03/25
	Technical article	How to deliver current beyond 100 A to an ADAS processor	PDF \| HTML	2024/01/04
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	2023/12/06
	Application note	Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B)	PDF \| HTML	2023/11/29
	EVM User's guide	TPS62876 Stackable Buck Converter Evaluation Module User's Guide	PDF \| HTML	2023/06/07
	EVM User's guide	TPS62876 Buck Converter Evaluation Module User's Guide	PDF \| HTML	2023/03/16
	Functional safety information	TPS62874-Q1, TPS62875-Q1, TPS62876-Q1 and TPS62877- Q1 Functional Safety FIT Rat		2023/03/14
	Application note	Using the Filters with the DC/DC Step-Down Converter	PDF \| HTML	2023/02/02
	Application note	Operating TPS6287X-Q1 Devices in a Stacked Configuration	PDF \| HTML	2023/01/30
	Application note	Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter	PDF \| HTML	2022/12/22
	Application note	Understanding SOA Curves to Operate at High Output Currents and Temperature	PDF \| HTML	2022/05/05
	Application note	How to Measure Impedance of a Power Distribution Network of a DC-DC Converter	PDF \| HTML	2022/01/20
	Application note	Loop Gain Reconstruction of a Step-Down Converter from Output Impedance	PDF \| HTML	2022/01/20
	White paper	Enabling Higher Data Rates for Optical Modules With Small and Efficient Power		2021/03/22
	White paper	Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies		2019/10/14
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		2019/06/14
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017/10/24
	Analog Design Journal	Understanding frequency variation in the DCS-Control(TM) topology		2015/10/30
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		2015/08/17
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		2015/01/29
	Analog Design Journal	High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions		2013/07/25
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012/01/13
	Application note	Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs		2011/09/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62876EVM-198 — TPS62876-Q1 평가 모듈 2.7V ~ 6V 입력, 스텝다운 컨버터

TPS62876EVM-198 평가 모듈(EVM)은 사용자가 TPS62876-Q1 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 또한 TPS62874-Q1, TPS62875-Q1 및 TPS62877-Q1 디바이스를 평가하는 데 사용할 수 있습니다. EVM은 2.7V~6.0V 입력 전압을 조정된 0.75V 출력 전압으로 변환합니다. 출력 전류는 최대 25A까지 올릴 수 있습니다.

사용 설명서: PDF | HTML

TI.com에서 구매 불가

평가 보드

TPS62876EVM-199 — TPS62876-Q1 평가 모듈 75A 출력, 적층형 스텝다운 컨버터

TPS62876EVM-199 평가 모듈(EVM)은 사용자가 스택형으로 구성된 세 TPS62876-Q1 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 또한 TPS62874-Q1, TPS62875-Q1 및 TPS62877-Q1 디바이스를 평가하는 데 사용할 수 있습니다. EVM은 2.7V~6.0V 입력 전압을 조정된 0.75V 출력 전압으로 변환합니다. 출력 전류는 최대 75A까지 올릴 수 있습니다.

사용 설명서: PDF | HTML