계산 툴
TPS630252
- Real Buck or Boost Operation with Automatic and
Seamless Transition Between Buck and Boost
Operation - 2.3 V to 5.5 V input voltage range
- 2 A Continuous Output Current : VIN≥ 2.5 V,
VOUT= 3.3 V - Adjustable and Fixed Output Voltage
- Efficiency up to 95% in Buck or Boost Mode and
up to 97% when VIN=VOUT - 2.5MHz Typical Switching Frequency
- 35-µA Operating Quiescent Current
- Integrated Soft Start
- Power Save Mode
- True Shutdown Function
- Output Capacitor Discharge Function
- Over-Temperature Protection and Over-Current
Protection - Wide Capacitance Selection
- Small 1.766 mm × 2.086 mm, 20-pin WCSP and
2.5 mm × 3 mm, 14-pin Hot Rod
The TPS63025x are high efficiency, low quiescent current buck-boost converters suitable for application where the input voltage is higher or lower than the output. Output currents can go as high as 2 A in boost mode and as high as 4 A in buck mode. The maximum average current in the switches is limited to a typical value of 4 A. The TPS63025x regulates the output voltage over the complete input voltage range by automatically switching between buck or boost mode depending on the input voltage ensuring a seamless transition between modes. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain highest efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over the complete load current range. There is a PFM/PWM pin that allows the user to choose between automatic PFM/PWM mode operation and forced PWM operation. During PWM mode a fixed-frequency of typically 2.5 MHz is used. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 20-pin WCSP package measuring 1.766 mm × 2.086mm and 14-pin HotRod package measuring 2.5 mm × 3mm.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | High Current Single Inductor Buck-Boost Converter datasheet (Rev. B) | 2014/06/16 | |
| Application note | 4스위치 벅 부스트 전력 단계의 기본 계산 (Rev. C) | PDF | HTML | 2023/10/02 | |
| Application note | Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) | PDF | HTML | 2021/06/09 | |
| Application note | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||
| Application note | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018/09/19 | ||
| User guide | TPS63025xEVM-553 | 2014/04/25 | ||
| Analog Design Journal | IQ: What it is, what it isn’t, and how to use it | 2011/06/17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS630250EVM-553 — TPS630250 DSBGA 4A 스위치 벅-부스트 레귤레이터 평가 모듈
TPS63025xEVM-553은 2.5MHz(일반) 완전 통합 벅-부스트 컨버터인 텍사스 인스트루먼트 TPS63025 장치 제품군의 테스트 및 평가를 지원합니다.
TPS63025x 디바이스는 벅-부스트 토폴로지의 고효율, 낮은 정동작 전류 디바이스입니다. 입력 전압이 출력 전압보다 높거나 낮을 수 있는 애플리케이션에 적합합니다. 출력 전류는 최대 2A(부스트 모드)까지 각각 4A(벅 모드)
사용 설명서: PDF
시뮬레이션 모델
TPS630252 Unencrypted PSpice Transient Model Package (Rev. A)
SLVMAJ0A.ZIP (85 KB) - PSpice Model
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YFF) | 20 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치