TPS65094

활성

Apollo Lake 프로세서를 위한 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC)

제품 상세 정보

Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
VQFN (RSK) 64 64 mm² 8 x 8
  • Wide VIN range from 5.6 V to 21 V
  • Three variable-output voltage synchronous
    Step-down controllers With D-CAP2™ Topology
    • 5 A for BUCK1 (VNN), 7 A for BUCK6 (VDDQ), and 21 A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C Dynamic Voltage Scaling (DVS) control
      (0.5 V to 1.45 V in 10-mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous
    Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5 V to 5.5 V
    • 3 A of output current for BUCK3 (VCCRAM)
    • 2 A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35 V to 3.3 V for up to 200 mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7 V to 1.5 V for up to 600 mA of Output Current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400 mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96 mΩ at input voltage of 1.8 V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100 kHz)
    • Fast mode (400 kHz)
    • Fast mode plus (1 MHz)
  • Wide VIN range from 5.6 V to 21 V
  • Three variable-output voltage synchronous
    Step-down controllers With D-CAP2™ Topology
    • 5 A for BUCK1 (VNN), 7 A for BUCK6 (VDDQ), and 21 A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C Dynamic Voltage Scaling (DVS) control
      (0.5 V to 1.45 V in 10-mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous
    Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5 V to 5.5 V
    • 3 A of output current for BUCK3 (VCCRAM)
    • 2 A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35 V to 3.3 V for up to 200 mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7 V to 1.5 V for up to 600 mA of Output Current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400 mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96 mΩ at input voltage of 1.8 V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100 kHz)
    • Fast mode (400 kHz)
    • Fast mode plus (1 MHz)

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for Connected Standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8-mm × 8-mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for Connected Standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8-mm × 8-mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet TPS65094 PMIC for Intel™ Apollo Lake Platform datasheet (Rev. D) PDF | HTML 2019/06/12
EVM User's guide TPS65094x Evaluation Module User's Guide (Rev. A) 2017/07/26
Application note TPS65094x Schematic Checklist, Layout Checklist, and ILIM Calculator tool (Rev. A) 2017/01/20
User guide TPS65094x Design Guide 2015/08/29
White paper Power management integrated buck controllers for distant point-of-load apps 2015/08/14

설계 및 개발

전원 공급 솔루션

TPS65094을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.

평가 보드

TPS650941EVM-116 — TPS65094x 평가 모듈

The TPS650941EVM-116 demonstrates the integrated circuit TPS65094 from Texas Instruments.

The TPS65094 device is a single-chip solution, power-management IC designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, and notebooks with NVDC or non-NVDC power (...)

사용 설명서: PDF
평가 모듈(EVM)용 GUI

IPG-UI IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
멀티 채널 IC(PMIC)
TPS65020 3개의 DC/DC, 3개의 LDO, I2C 인터페이스 및 동적 전압 스케일링을 지원하는 6채널 전원 관리 IC(PMIC) TPS65023 DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 전원 관리 IC(PMIC) TPS65023B DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 6채널 전원 관리 IC(PMIC) TPS65055 4개의 낮은 입력 전압 LDO를 지원하는 2.25MHz 듀얼 스텝다운 컨버터 TPS65084 Braswell 프로세서용 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65086 2S 및 3S 리튬 이온 배터리 작동 장치 또는 비 배터리 장치용 구성 가능 멀티 레일 PMIC TPS650861 사용자 프로그래머블 3 컨버터, 3 컨트롤러, 4 LDO 및 3 부하 스위치 전원 관리 IC(PMIC) TPS65090 스위치 모드 충전기, DCDC 3개, LDO 2개 및 부하 스위치 7개를 갖춘 6V~7V 전원 관리 IC(PMIC) TPS65094 Apollo Lake 프로세서를 위한 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65217 3 DC/DC, 4 LDO, 선형 배터리 충전기 및 백색 LED 드라이버를 지원하는 통합 전원 관리 IC(PMIC) TPS652170 DC/DC 3개, LDO 4개, 배터리 충전기 및 LED 드라이버를 지원하는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218 ARM Cortex-A8/A9 SoCs 및 FPGA용 PMIC(통합 전원 관리) TPS6521815 6개의 DC/DC 컨버터, 1개의 LDO 및 3개의 부하 스위치가 있는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218D0 ARM® Cortex™-A8/A9 SOC 및 FPGA용 통합 전원 관리(PMIC) TPS657095 임베디드 카메라 모듈 PMIC TPS65910 6x6mm QFN 제품군, 4개의 DC/DC, 8개의 LDO 및 RTC를 지원하는 통합 전원 관리 IC(PMIC) TPS65911 DC/DC 4개, LDO 9개, RTC를 지원하는 통합 전원 관리 IC(PMIC) TPS65912 DC/DC 4개, LDO 10개, LED 출력 3개 및 32kHz RC 오실레이터를 지원하는 전원 관리 IC(PMIC) TPS659128 프로세서 전원용 PMU
하드웨어 개발
평가 보드
BOOSTXL-TPS650861 TPS650861 고객 프로그래밍 BoosterPack TPS65023BEVM-664 TPS65023B 평가 모듈 TPS65023EVM-205 TPS65023 평가 모듈 TPS650860EVM-116 TPS650860 평가 모듈 TPS65218EVM-100 TPS65218 평가 모듈
소프트웨어
평가 모듈(EVM)용 GUI
IPG-UI IPG-UI EVM GUI
평가 모듈(EVM)용 GUI

IPG-UI-LINUX IPG-UI EVM GUI (Linux Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
멀티 채널 IC(PMIC)
TPS65023B DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 6채널 전원 관리 IC(PMIC) TPS65084 Braswell 프로세서용 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65086 2S 및 3S 리튬 이온 배터리 작동 장치 또는 비 배터리 장치용 구성 가능 멀티 레일 PMIC TPS650861 사용자 프로그래머블 3 컨버터, 3 컨트롤러, 4 LDO 및 3 부하 스위치 전원 관리 IC(PMIC) TPS65094 Apollo Lake 프로세서를 위한 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS652170 DC/DC 3개, LDO 4개, 배터리 충전기 및 LED 드라이버를 지원하는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS6521815 6개의 DC/DC 컨버터, 1개의 LDO 및 3개의 부하 스위치가 있는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218D0 ARM® Cortex™-A8/A9 SOC 및 FPGA용 통합 전원 관리(PMIC) TPS657095 임베디드 카메라 모듈 PMIC TPS659128 프로세서 전원용 PMU
하드웨어 개발
평가 보드
TPS65023BEVM-664 TPS65023B 평가 모듈 TPS65023EVM-205 TPS65023 평가 모듈 TPS650860EVM-116 TPS650860 평가 모듈 TPS65218EVM-100 TPS65218 평가 모듈
소프트웨어
평가 모듈(EVM)용 GUI
IPG-UI IPG-UI EVM GUI
평가 모듈(EVM)용 GUI

IPG-UI-OSX IPG-UI EVM GUI (OSX Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
멀티 채널 IC(PMIC)
TPS65023B DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 6채널 전원 관리 IC(PMIC) TPS65084 Braswell 프로세서용 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65086 2S 및 3S 리튬 이온 배터리 작동 장치 또는 비 배터리 장치용 구성 가능 멀티 레일 PMIC TPS650861 사용자 프로그래머블 3 컨버터, 3 컨트롤러, 4 LDO 및 3 부하 스위치 전원 관리 IC(PMIC) TPS65094 Apollo Lake 프로세서를 위한 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS652170 DC/DC 3개, LDO 4개, 배터리 충전기 및 LED 드라이버를 지원하는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS6521815 6개의 DC/DC 컨버터, 1개의 LDO 및 3개의 부하 스위치가 있는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218D0 ARM® Cortex™-A8/A9 SOC 및 FPGA용 통합 전원 관리(PMIC) TPS657095 임베디드 카메라 모듈 PMIC TPS659128 프로세서 전원용 PMU
하드웨어 개발
평가 보드
TPS65023BEVM-664 TPS65023B 평가 모듈 TPS65023EVM-205 TPS65023 평가 모듈 TPS650860EVM-116 TPS650860 평가 모듈 TPS65218EVM-100 TPS65218 평가 모듈
소프트웨어
평가 모듈(EVM)용 GUI
IPG-UI IPG-UI EVM GUI
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RSK) 64 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상