TPS7H5004-SP
- Radiation performance:
- Radiation hardness assured (RHA) up to TID 100krad(Si)
- SEL, SEB, and SEGR immune to LET = 75MeV-cm2/mg
- SET and SEFI characterized up to LET = 75MeV-cm2/mg
- No cross-conduction events for controller outputs observed during SET characterization
- Input voltage: 4V to 14V
- 0.613V +0.7%/–1% voltage reference over temperature, radiation, and line and load regulation
- Switching frequency from 100kHz to 2MHz
- External clock synchronization capability
- Synchronous rectification outputs
- TPS7H5001-SP, TPS7H5002-SP, TPS7H5003-SP
- Adjustable dead time
- TPS7H5001-SP, TPS7H5002-SP
- Adjustable leading edge blank time
- TPS7H5001-SP, TPS7H5002-SP, TPS7H5004-SP
- Configurable duty cycle limit
- TPS7H5001-SP, TPS7H5002-SP, TPS7H5003-SP
- Adjustable slope compensation and soft start
- Package options include CFP and TSSOP
The TPS7H500x-SP family of high speed radiation-hardness-assured PWM controllers. The controllers provide a number of features that are beneficial for the design of DC-DC converter topologies intended for space applications. The controllers have a 0.613V +0.7%/–1% accurate internal reference and configurable switching frequency up to 2MHz. Each device offers programmable slope compensation and soft-start.
The TPS7H500x-SP series can be driven using an external clock through the SYNC pin or by using the internal oscillator at a frequency programmed by the user. The controller family offers the user various options for switching outputs, synchronous rectification capability, dead time (fixed or configurable), leading edge blank time (fixed or configurable), and duty cycle limit. Each device in the TPS7H500x-SP series is available in both a 22-pin CFP ceramic package and a 24-pin TSSOP plastic package.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7H5004EVM-CVAL — TPS7H5004 2Mhz 듀얼 출력 PWM 컨트롤러용 평가 모듈
TPS7H5004EVM-CVAL은 TPS7H5004-SP 컨트롤러가 개방형 루프에서 어떻게 작동할 수 있는지 보여주고 제품을 작동할 테스트 플랫폼을 제공하는 평가 모듈(EVM)입니다.
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
CFP (HFT) | 22 | Ultra Librarian |
DIESALE (KGD) | — | |
TSSOP (PW) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치