전원 관리 게이트 드라이버 절연 게이트 드라이버

UCC23513

활성

8 및 12V UVLO 옵션을 지원하는 5.7kVrms, 4A/5A 단일 채널 Opto 호환 절연 게이트 드라이버

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
신규 UCC23525 미리 보기 12V UVLO를 지원하는 5A/5A, 5.7kVRMS 강화 단일 채널 Opto 호환 절연 게이트 드라이버 Higher noise immunity and drive strength

제품 상세 정보

Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Power switch IGBT, MOSFET, SiCFET Peak output current (A) 4.5 Features Opto-compatible input Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 14 Input threshold 4 mA, 4mA Operating temperature range (°C) -40 to 125 Rating Catalog Bootstrap supply voltage (max) (V) 1500 Fall time (ns) 25 Undervoltage lockout (typ) (V) 8, 12
Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Power switch IGBT, MOSFET, SiCFET Peak output current (A) 4.5 Features Opto-compatible input Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 14 Input threshold 4 mA, 4mA Operating temperature range (°C) -40 to 125 Rating Catalog Bootstrap supply voltage (max) (V) 1500 Fall time (ns) 25 Undervoltage lockout (typ) (V) 8, 12
SOIC (DWY) 6 53.82 mm² 4.68 x 11.5
  • single channel isolated gate driver with opto-compatible input
  • Pin-to-pin, drop in upgrade for opto isolated gate drivers
  • peak output current
  • 14-V to 33-V output driver supply voltage
    • 8-V (B) and 12-V VCC UVLO Options
  • Rail-to-rail output
  • 105-ns (maximum) propagation delay
  • 25-ns (maximum) part-to-part delay matching
  • 35-ns (maximum) pulse width distortion
  • 150-kV/µs (minimum) common-mode transient immunity (CMTI)
  • Isolation barrier life >50 Years
  • 13-V reverse polarity voltage handling capability on input stage
  • Stretched SO-6 package with >8.5-mm creepage and clearance
  • Operating junction temperature, TJ: –40°C to +150°C
  • Safety-related certifications:
    • 8000-VPK reinforced isolation per DIN V VDE V0884-11: 2017-01
    • 5.7-kVRMS isolation for 1 minute per UL 1577
    • CQC certification per GB4943.1-2011
  • single channel isolated gate driver with opto-compatible input
  • Pin-to-pin, drop in upgrade for opto isolated gate drivers
  • peak output current
  • 14-V to 33-V output driver supply voltage
    • 8-V (B) and 12-V VCC UVLO Options
  • Rail-to-rail output
  • 105-ns (maximum) propagation delay
  • 25-ns (maximum) part-to-part delay matching
  • 35-ns (maximum) pulse width distortion
  • 150-kV/µs (minimum) common-mode transient immunity (CMTI)
  • Isolation barrier life >50 Years
  • 13-V reverse polarity voltage handling capability on input stage
  • Stretched SO-6 package with >8.5-mm creepage and clearance
  • Operating junction temperature, TJ: –40°C to +150°C
  • Safety-related certifications:
    • 8000-VPK reinforced isolation per DIN V VDE V0884-11: 2017-01
    • 5.7-kVRMS isolation for 1 minute per UL 1577
    • CQC certification per GB4943.1-2011

The opto-compatible, single-channel, isolated gate driver for IGBTs, MOSFETs and SiC MOSFETs, with 4.5-A source and 5.3-A sink peak output current and 5.7-kVRMS isolation rating. The high supply voltage range of 33-V allows the use of bipolar supplies to effectively drive IGBTs and SiC power FETs. can drive both low side and high side power FETs bring significant performance and reliability upgrades over opto-coupler based gate drivers while maintaining pin-to-pin compatibility in both schematic and layout design. Performance highlights include high common mode transient immunity (CMTI), low propagation delay, and small pulse width distortion. Tight process control results in small part-to-part skew. The input stage is an emulated diode (e-diode) which means long term reliability and excellent aging characteristics compared to traditional LEDs. igh performance and reliability makes ideal for use in all types of motor drives, . The higher operating temperature opens up opportunities for applications not supported by traditional optocouplers.

The opto-compatible, single-channel, isolated gate driver for IGBTs, MOSFETs and SiC MOSFETs, with 4.5-A source and 5.3-A sink peak output current and 5.7-kVRMS isolation rating. The high supply voltage range of 33-V allows the use of bipolar supplies to effectively drive IGBTs and SiC power FETs. can drive both low side and high side power FETs bring significant performance and reliability upgrades over opto-coupler based gate drivers while maintaining pin-to-pin compatibility in both schematic and layout design. Performance highlights include high common mode transient immunity (CMTI), low propagation delay, and small pulse width distortion. Tight process control results in small part-to-part skew. The input stage is an emulated diode (e-diode) which means long term reliability and excellent aging characteristics compared to traditional LEDs. igh performance and reliability makes ideal for use in all types of motor drives, . The higher operating temperature opens up opportunities for applications not supported by traditional optocouplers.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
25개 모두 보기
유형 직함 날짜
* Data sheet UCC23513 4-A/5-A, 5.7-kVRMS Opto-Compatible Single Channel Isolated Gate Driver datasheet (Rev. E) 2020/07/24
White paper 신뢰할 수 있는 합리적 가격대의 절연 기술 개발과 관련한 고전압 설계 문제의 해결 (Rev. C) PDF | HTML 2024/05/16
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) 2024/02/29
White paper Understanding failure modes in isolators (Rev. B) PDF | HTML 2024/01/29
Application note Discrete DESAT for Opto-Compatible Isolated Gate Driver UCC23513 in Motor Drives PDF | HTML 2023/10/24
White paper Circuit Board Insulation Design According to IEC60664 for Motor Drive Apps PDF | HTML 2023/08/31
Certificate UCC23513 CQC Certificate of Product Certification (Malaysia) 2023/08/29
Certificate UCC23513 CQC Certificate of Product Certification 2023/08/16
Technical article Misconceptions about EV charging PDF | HTML 2022/02/24
Application brief The Use and Benefits of Ferrite Beads in Gate Drive Circuits PDF | HTML 2021/12/16
Certificate FPPT2 - Nonoptical Isolating Devices UL 1577 Certificate of Compliance 2021/10/26
Application brief External Gate Resistor Selection Guide (Rev. A) 2020/02/28
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 2020/02/28
E-book E-book: An engineer’s guide to industrial robot designs 2020/02/12
Technical article Solving lifetime and temperature challenges in AC motor drives with capacitive-bas PDF | HTML 2019/11/01
Functional safety information Isolation in AC Motor Drives: Understanding the IEC 61800-5-1 Safety Standard (Rev. A) 2019/09/19
EVM User's guide UCC2351x Evaluation Module User’s Guide (Rev. B) 2019/09/09
White paper How Capacitive Isolation Solves Key Challenges in AC Motor Drives 2019/08/23
Certificate UL Certification E181974 Vol 4. Sec 9 (Rev. A) 2019/07/22
Application note UCC23513 Input Resistor Selection Guide (Rev. A) 2019/06/18
Technical article Interlocking gate drivers for improving the robustness of three-phase inverters PDF | HTML 2019/03/26
Technical article Replace your aging optocoupler gate driver PDF | HTML 2019/03/14
White paper Impact of an isolated gate driver (Rev. A) 2019/02/20
Technical article Searching for the newest innovations in power? Find them at APEC PDF | HTML 2019/02/09
EVM User's guide Using the UCC23513EVM-014 2018/06/07

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC23513EVM-014 — 옵토 호환 입력 EVM을 지원하는 UCC23513 3A, 5kVrms, 단일 채널 절연 게이트 드라이버

UCC23513EVM-014 evaluation module is designed for evaluation of TI's 5-kVRMS isolated single-channel gate driver with opto compatible input, UCC23513. The input is current driven, requiring between 7 mA and 16 mA for device turn-on, and can be reverse biased for turn-off. The device is capable of (...)
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

UCC23513 PSpice Transient Model

SLUM668.ZIP (44 KB) - PSpice Model
시뮬레이션 모델

UCC23513 SIMPLIS Transient Model (Rev. A)

SLUM662A.ZIP (48 KB) - SIMPLIS Model
시뮬레이션 모델

UCC23513 Unencrypted PSpice Transient Model

SLUM667.ZIP (2 KB) - PSpice Model
시뮬레이션 모델

UCC23513B SIMPLIS Model

SLUM744.ZIP (19 KB) - SIMPLIS Model
계산 툴

SLUC668 UCC23513 Input Resistor Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
절연 게이트 드라이버
UCC23513 8 및 12V UVLO 옵션을 지원하는 5.7kVrms, 4A/5A 단일 채널 Opto 호환 절연 게이트 드라이버
거버(Gerber) 파일

UCC23513EVM Design Files

SLUC669.ZIP (6580 KB)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
레퍼런스 디자인

TIDA-010025 — 옵토 에뮬레이트 입력 게이트 드라이버를 갖춘 200~480 VAC 드라이브를 위한 3상 인버터 게이트 레퍼런스 설계

This reference design realizes a reinforced isolated three-phase inverter subsystem using isolated IGBT gate drivers and isolated current/voltage sensors. The UCC23513 gate driver used has a 6-pin wide body package with optical LED emulated inputs which enables its use as pin-to-pin replacement to (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

PMP40994 — IGBT용으로 1500V 절연이 포함되어 있는 4W 듀얼 채널 절연 게이트 드라이버 레퍼런스 설계

이 레퍼런스 설계는 태양광 인버터, PC, UPS 및 모터 드라이버 애플리케이션의 절연 게이트 양극 트랜지스터(IGBT)를 위한 소형 듀얼 채널 출력 절연 게이트 드라이버 보드 설계입니다. 절연 바이어스 전력은 우수한 전압 조정을 달성하면서 1,500V 절연의 2채널 절연 출력을 제공하는 TPS54308을 사용하여 플라이벅 토폴로지로 구현됩니다. 이 설계는 간편한 제조를 위한 단일 계층 PCB 보드입니다.
Test report: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (DWY) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상