전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC256402

활성

초저 대기 전력의 고전압 시동을 지원하는 LLC 공진 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 UCC25660 활성 넓은 VIN및 VOUT 750kHz LLC 컨트롤러 Capable of higher operating frequency and supports wider VIN/VOUT operation

제품 상세 정보

Vin (min) (V) 13 Vin (max) (V) 30 Operating temperature range (°C) -40 to 125 Control mode Current Topology Half bridge, LLC Rating Catalog Features HV Start-up, High voltage gate driver integrated, High voltage startup, Hybrid hysteretic control, LLC, Light load efficiency, Low power, Over Temperature Protection, Programmable soft start, Thermal shutdown, USB C/PD compatible, Zero voltage switching
Vin (min) (V) 13 Vin (max) (V) 30 Operating temperature range (°C) -40 to 125 Control mode Current Topology Half bridge, LLC Rating Catalog Features HV Start-up, High voltage gate driver integrated, High voltage startup, Hybrid hysteretic control, LLC, Light load efficiency, Low power, Over Temperature Protection, Programmable soft start, Thermal shutdown, USB C/PD compatible, Zero voltage switching
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
8개 모두 보기
유형 직함 날짜
* Data sheet UCC25640x LLC Resonant Controller with Ultra-Low Audible Noise and Standby Power datasheet (Rev. E) PDF | HTML 2021/02/19
Application note UCC25640X Benefits in LED Lighting PSU PDF | HTML 2024/01/04
Application note Most Frequently Asked Questions About the UCC25640x LLC Resonant Controller PDF | HTML 2023/06/05
Application note UCC25640x LLC Resonant Controller Features Brief Overview and Bring up Guideline PDF | HTML 2022/06/20
Application note Improving Transient Response in LLC Converters Using Hybrid Hysteretic Control (Rev. B) 2021/04/07
Technical article How to reduce audible noise and power consumption at standby in your AC/DC design PDF | HTML 2020/04/22
Application note Migrating to UCC25640x from UCC25630x (Rev. A) 2019/12/10
Application note Improving ZVS and efficiency in LLC converters 2018/11/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

PFCLLCSREVM034 — UCC28056B, UCC256404 및 UCC24624를 지원하는 AC-절연 DC EVM

PFCLLCSREVM034 is a 168-W AC/DC supply with a transition-mode power-factor-correction front end and isolated half-bridge LLC resonant converter with synchronous rectification. This EVM accepts AC input from 90 Vrms to 264 Vrms and outputs 12-V DC with 168-W full-load output power.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

UCC25640EVM-020 — UCC25640x 하프 브리지 LLC 평가 모듈

UCC25640EVM-020 is a 180W, LLC resonant converter using UCC256404. This EVM accepts DC input from 360V to 410V, AC input voltage from 85VAC to 264VAC and outputs 12VDC with 180W full load output power.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

UCC25640x Simplis Model

SLUM684.ZIP (178 KB) - SIMPLIS Model
계산 툴

SLUC675 UCC25640x Design Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
UCC256402 초저 대기 전력의 고전압 시동을 지원하는 LLC 공진 컨트롤러 UCC256403 초저전력 및 초저소음 대기 작동을 지원하는 LLC 공진 컨트롤러 UCC256404 초저전력 및 초저소음 대기 작동 및 고전압 시동을 지원하는 LLC 공진 컨트롤러
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (DDB) 14 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상