계산 툴
데이터 시트
UCC28701
- < 30-mW No-Load Power for 5-Star Rating
- Primary-Side Regulation (PSR) Eliminates Opto-Coupler
- ±5% Voltage and Current Regulation
- 130-kHz Maximum Switching Frequency Enables High-Power
Density Charger Designs - Quasi-Resonant Valley-Switching Operation for Highest
Overall Efficiency - Patent-Pending Frequency-Jitter Scheme to Ease EMI
Compliance - Wide VDD Range Allows Small Bias Capacitor
- Clamped Gate-Drive Output for MOSFET
- Protection Functions: Overvoltage, Low-Line, and
Overcurrent - Programmable Cable Compensation (UCC28700 Only)
- NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
Only) With Fixed Cable Compensation Options - SOT-23 Package
The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.
Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
11개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | UCC2870x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation datasheet (Rev. A) | PDF | HTML | 2014/12/12 |
| Application note | Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips | PDF | HTML | 2021/08/31 | |
| Application note | Minimize Standby Consumption for UCC287XX Family | 2019/08/01 | ||
| Application note | Selecting Electrolitic Bus Capacitor for Universal Input | 2018/07/17 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | Troubleshooting TI PSR controllers | 2016/10/03 | ||
| White paper | Control Challenges for Low Power AC/DC Converters | 2015/10/02 | ||
| White paper | Control Challenges for Low Power AC/DC Converters (PPT) | 2015/10/02 | ||
| Application note | Is Your IGBT Gate-Driver Power Supply Optimized | 2015/03/12 | ||
| Application note | UCC28700 5-W USB Flyback Design Review (Rev. C) | 2014/02/21 | ||
| More literature | Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter | 2013/10/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
UCC28711EVM-160 — UCC28711 평가 모듈
The Texas Instruments UCC28711EVM-160 evaluation module (EVM) helps designers evaluate the performance of the UCC28711 Constant-Voltage, Constant-Current PWM with Primary-Side Regulation. The 5W EVM is used for evaluating an off line adapter for USB applications. It converts a 90V to 265V RMS (...)
사용 설명서: PDF
시뮬레이션 모델
UCC2870x TINA-TI Transient Reference Design
SLUM619.TSC (195 KB) - TINA-TI Reference Design
계산 툴
SLUC408 — UCC28700 Excel 97 Design Tool
지원되는 제품 및 하드웨어
제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
레퍼런스 디자인
PMP12082 — 3상 AC 입력, 삼중 출력 바이어스 전원 레퍼런스 디자인
The PMP12082 is a bias supply reference design with 3-phase input (80VAC~280VAC) and triple outputs - 7V/1.4A, 3.3V/500mA, and 3.3V/300mA. UCC28701 primary side regulation controller is applied for a Cascode-MOSFET flyback converter with dual output windings. One winding supplies 7V/1.4A output (...)
레퍼런스 디자인
TIDA-00182 — 8출력을 지원하는 강화 절연 IGBT 게이트 드라이브 플라이백 전원 공급 장치 레퍼런스 디자인
This reference design provides reinforced isolated positive and negative voltage rails required for Insulated Gate Bipolar Transistor (IGBT) gate drivers from a single 24-volt DC input supply. Utilizing a flyback isolated control topology, this reference design provides isolation compliant to (...)
레퍼런스 디자인
PMP8502 — UCC28701을 사용하는 5V@1.6A 절연 1차측 조정 플라이백 레퍼런스 디자인
The PMP8502 reference design uses the UCC28701 quasi-resonant flyback converter to generate an isolated output (5V @ 1.6A). It is a low cost solution because no optocoupler is needed to regulate the output voltage.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치