홈 무선 커넥티비티 Wi-Fi 제품
홈
무선 커넥티비티
Wi-Fi 제품

WL1805MOD

활성

WiLink™ 8 싱글 밴드, 2x2 MIMO Wi-Fi® 모듈

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
신규 CC3301MOD 미리 보기 SimpleLink™ Wi-Fi 6 및 Bluetooth® 저에너지 컴패니언 모듈 Upgraded functionality with Wi-Fi 6 and Bluetooth Low Energy

WL1805MOD

활성
데이터 시트 지금 주문

제품 상세 정보

Processor External MPU Type Module, Transceiver Protocols Wi-Fi 2.4 GHz Throughput UDP (max) (Mbps) 100 Security Networking security (WPA3) Features 2x2 MIMO, 802.11bgn, AP, Mesh over Wi-Fi based on 802.11s, STA, Wi-Fi direct mode Certifications CE, FCC, ISED, MIC Operating temperature range (°C) -20 to 70 Rating Catalog
Processor External MPU Type Module, Transceiver Protocols Wi-Fi 2.4 GHz Throughput UDP (max) (Mbps) 100 Security Networking security (WPA3) Features 2x2 MIMO, 802.11bgn, AP, Mesh over Wi-Fi based on 802.11s, STA, Wi-Fi direct mode Certifications CE, FCC, ISED, MIC Operating temperature range (°C) -20 to 70 Rating Catalog
QFM (MOC) 100 178.22 mm² 13.3 x 13.4
  • General
    • Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
    • Quick hardware design with TI module collateral and reference designs
    • Operating temperature: –20°C to +70°C
    • Small form factor: 13.3 × 13.4 × 2 mm
    • 100-pin MOC package
    • FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
  • Wi-Fi
    • WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
    • 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
    • 2.4-GHz MRC support for extended range
    • Fully calibrated: production calibration not required
    • 4-bit SDIO host interface support
    • Wi-Fi direct concurrent operation (multichannel, multirole)
  • Bluetooth and Bluetooth low energy (WL183xMOD only)
    • Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)
    • Host controller interface (HCI) transport for Bluetooth over UART
    • Dedicated audio processor support of SBC encoding + A2DP
    • Dual-mode Bluetooth and Bluetooth low energy
    • TI’s Bluetooth and Bluetooth low energy certified stack
  • Key benefits
    • Reduces design overhead
    • Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
    • Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
    • Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
    • Lowest Wi-Fi power consumption in connected idle (< 800 µA)
    • Configurable wake on WLAN filters to only wake up the system
    • Wi-Fi and Bluetooth single antenna coexistence
  • General
    • Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
    • Quick hardware design with TI module collateral and reference designs
    • Operating temperature: –20°C to +70°C
    • Small form factor: 13.3 × 13.4 × 2 mm
    • 100-pin MOC package
    • FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
  • Wi-Fi
    • WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
    • 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
    • 2.4-GHz MRC support for extended range
    • Fully calibrated: production calibration not required
    • 4-bit SDIO host interface support
    • Wi-Fi direct concurrent operation (multichannel, multirole)
  • Bluetooth and Bluetooth low energy (WL183xMOD only)
    • Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)
    • Host controller interface (HCI) transport for Bluetooth over UART
    • Dedicated audio processor support of SBC encoding + A2DP
    • Dual-mode Bluetooth and Bluetooth low energy
    • TI’s Bluetooth and Bluetooth low energy certified stack
  • Key benefits
    • Reduces design overhead
    • Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
    • Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
    • Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
    • Lowest Wi-Fi power consumption in connected idle (< 800 µA)
    • Configurable wake on WLAN filters to only wake up the system
    • Wi-Fi and Bluetooth single antenna coexistence

The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
filter 기타 Wi-Fi 제품 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
33개 모두 보기
유형 직함 날짜
* Data sheet WL18x1MOD, WL18x5MOD WiLink™ 8 Single-Band Combo Module – Wi-Fi®, Bluetooth®, and Bluetooth Low Energy (LE) datasheet (Rev. N) PDF | HTML 2021/04/26
* Radiation & reliability report WL1805MOD Reliability Data - Reliability Estimate 2017/07/27
Cybersecurity advisory Buffer Overflow in WL18xx MCP Driver (Rev. A) PDF | HTML 2023/08/22
Cybersecurity advisory WiLink WL18xx PN Reuse Issue PDF | HTML 2023/08/02
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) PDF | HTML 2022/10/20
Application note Antenna Impedance Measurement and Matching PDF | HTML 2022/03/22
User guide WiLink8 Getting Started Guide (Rev. B) PDF | HTML 2021/12/20
User guide WL1835MODCOM8 WLAN MIMO/BT Module Board (Rev. F) PDF | HTML 2021/12/17
Cybersecurity advisory Bluetooth® Low Energy, Basic/Enhanced Data Rate–PIN-Code Pairing Key Derivation 2021/05/27
Cybersecurity advisory FragAttacks - FRagmentation and AGgregation Attacks (Rev. A) 2021/05/19
Certificate WL18MODGB (Test Grade 05: WL18MODGBMOC) EC DoC (Rev. A) 2021/03/03
White paper WiLink8 Use Case Guide PDF | HTML 2020/12/30
User guide WiLink8 Driver Debug PDF | HTML 2020/12/07
User guide WiLink8 Linux Advanced Demos PDF | HTML 2020/12/07
User guide WiLink8 R8.8 Linux Wi-Fi Driver Release Build User's Guide (Rev. A) PDF | HTML 2020/10/27
Product overview Sitara™ processors + WiLink™ 8 Wi-Fi® + Bluetooth® combo connectivity (Rev. A) 2019/07/30
User guide WL18xx Module Hardware Integration Guide (Rev. B) PDF | HTML 2019/07/09
Design guide WL18xx Design Checklist 2019/06/27
More literature Streamline the challenges of RF design with certified wireless modules 2017/01/25
Application note Certification Testing Guidelines for WFA System Interoperability Test Plans MCP 2016/12/28
Application note Certification Testing Guidelines for WFA System Interoperability Test Plans NLCP 2016/12/28
Application note WiLink 8.0TM WLAN IP Mesh Application Report 2016/06/01
User guide WiLinkT™ 8 WLAN Features User's Guide (Rev. A) PDF | HTML 2016/05/26
White paper Wi-Fi® mesh networks: Discover new wireless paths 2016/05/24
White paper Streaming Audio: Follow the signal chain white paper 2016/04/14
Application note Certification Testing Guidelines for WFA System Interoperability Test Plans 2016/02/15
More literature WiLink 8 Wi-Fi + Bluetooth/BLE Modules (Rev. B) 2016/02/03
Application note Precise Time Synchronization Over WLAN (Rev. A) 2015/12/18
Application note WL18xx .INI File (Rev. A) 2015/12/03
White paper Wi-Fi® audio: capabilities and challenges 2015/12/02
Application note WL18xx Level-shifting I/O (Rev. A) 2015/08/19
Application note WiLink 8 Solutions WiLink8 - wlconf Manual 2015/07/01
White paper Complete solutions for next-generation wireless connected audio 2014/01/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TMDSEVM437X — AM437x 평가 모듈

AM437x 평가 모듈(EVM) TMDXEVM437X는 개발자가 AM437x 프로세서 제품군((AM4372, AM4376, AM4377, AM4378)의 평가를 즉시 시작하고 HMI, 애플리케이션 구축을 개시하고, 산업용 및 네트워킹 애플리케이션 개발을 가속화할 수 있게 해줍니다. TMDSEVM437X 개발 플랫폼은 기가비트 이더넷, DDR3, 카메라 모듈 2개, 7" 정전식 터치 스크린 LCD와 같은 옵션이 결합되어 있는 Arm Cortex-A9 프로세서에 기반을 두고 있습니다.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TMDSEVM572X — AM572x 평가 모듈

The AM572x evaluation module provides an affordable platform to quickly start evaluation of Sitara™ Arm® Cortex®-A15 AM57x processors (AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI, machine vision, networking, medical imaging and many other industrial applications. It is a (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TMDXEVM3358 — AM335x 평가 모듈

The AM335x Evaluation Module (EVM) enables developers to immediately start evaluating the AM335x processor family (AM3351, AM3352, AM3354, AM3356, AM3358) and begin building applications for factory automation, building automation, grid infrastructure, and more.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

WL18XXCOM82SDMMC — WL18XXCOM82SDMMC

The WiLink SDIO board is a SDMMC adapter board and is an easy to use connector between a WiLink COM8 Evaluation module [WL1837MODCOM8i and WL1835MODCOM8B] and a generic SD/MMC card slot on a host processor EVM. The adapter card enables the WiLink Wi-Fi module to operate over SDIO. It also provides (...)

사용 설명서: PDF
TI.com에서 구매 불가
도터 카드

WL1835MODCOM8B — WiLink™ 8 모듈 2.4GHz Wi-Fi® + Bluetooth® COM8 평가 모듈

TI WiLink™ 8 module family

The WL1835MODCOM8 is one of the two evaluation boards for the TI WiLink 8 combo module family. For designs requiring performance in the 5 GHz band and extended temperature range, see the WL1837MODCOM8I.

The WL1835MODCOM8 Kit for Sitara EVMs easily enables customers to add (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
도터 카드

WL1837MODCOM8I — WiLink™ 8 듀얼 밴드 2.4 및 5GHz Wi-Fi® + Bluetooth® COM8 평가 모듈

TI WiLink™ 8 module family The WL1837MODCOM8I is one of the two evaluation boards for the TI WiLink™ 8 combo module family. For designs requiring performance in the 2.4 GHz band only, see the WL1835MODCOM8.

The WL1837MODCOM8I, which is compatible with many processors including TI’s (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
소프트웨어 개발 키트(SDK)

PROCESSOR-SDK-AM335X — Linux 및 TI-RTOS 지원을 위한 AM335x Sitara 프로세서용 프로세서 SDK

Processor SDK (Software Development Kit) is a unified software platform for TI embedded processors providing easy setup and fast out-of-the-box access to benchmarks and demos.  All releases of Processor SDK are consistent across TI’s broad portfolio, allowing developers to seamlessly (...)
View Options
애플리케이션 소프트웨어 및 프레임워크

WILINK-BT_WIFI-WIRELESS_TOOLS — WiLink&trade, WL18XX 모듈용 무선 툴

이 패키지에는 다음 애플리케이션이 포함되어 있습니다.
  • WLAN RTTT(실시간 튜닝 툴)
  • Bluetooth® 로거
  • WLAN gLogger
  • LQM(링크 품질 모니터)
  • HCITester 툴
    • BTSout
    • BTSTransform
    • ScriptPad

이 애플리케이션은 호스트로 WiLink™ WLAN/Bluetooth/Bluetooth 저에너지 펌웨어를 디버깅 및 모니터링하고, RF 검증 테스트를 수행하고, 규정 인증 테스트를 위한 사전 테스트를 실행하고, 하드웨어 및 소프트웨어 플랫폼 통합 문제를 디버그하는 데 필요한 모든 기능을 제공합니다.

WLAN 및 (...)

사용 설명서: PDF | HTML
다운로드
애플리케이션 소프트웨어 및 프레임워크

WILINK-WIFI_MESH_VISUALIZATION_TOOL — WL18XX 모듈용 WiLink™ 메시 시각화 툴

Wireless Mesh Explorer is a Microsoft® Windows® based software tool for exploring and displaying mesh networks based on the Texas Instruments WiLink8.0 chipset.
사용 설명서: PDF
다운로드
드라이버 또는 라이브러리

WILINK8-WIFI-MCP8 — WiLink™ 8개의 독점 Wi-Fi 드라이버 – QNX, WinCE, Nucleus RTOS 기준

The MCP package contains the install package, pre-compiled object and source of the proprietary Wi-Fi Driver - QNX, Nucleus, WinCE as well as ThreadX, FreeRTOS, µC, MQX ,RTX and uITRON RTOS baseline image to easily integrate the TI WiLink Wi-Fi drivers. The integration is supported through (...)

사용 설명서: PDF | HTML
View Options
드라이버 또는 라이브러리

WILINK8-WIFI-NLCP — WiLink8 NLCP Wi-Fi driver package for Linux OS

WiLink™ 8 NLCP package consists of build scripts to update WiLink™ 8 Linux driver, firmware binary, wpa supplicant, hostapd etc. For more details please refer to the release notes and user’s guide

Software block overview:

WL18xx Linux driver uses the open source components along with the interface (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Wi-Fi 제품
WL1801 — WiLink™8 단일 밴드 산업용 Wi-Fi® 트랜시버 WL1801MOD — WiLink™ 8 싱글 밴드 Wi-Fi® 모듈 WL1805MOD — WiLink™ 8 싱글 밴드, 2x2 MIMO Wi-Fi® 모듈 WL1807MOD — WiLink™ 8 산업용 이중 대역 콤보, 2x2 MIMO Wi-Fi 모듈 WL1831 — WiLink™8 단일 밴드 산업용 Wi-Fi®, Bluetooth® 및 Bluetooth 저에너지 트랜시버 WL1831MOD — WiLink™ 8 산업용 Wi-Fi, Bluetooth 및 Bluetooth Smart(저에너지) 모듈 WL1835MOD — WiLink™ 8 싱글 밴드 콤보 2x2 MIMO Wi-Fi®, Bluetooth® 및 Bluetooth Smart 모듈 WL1837MOD — WiLink™ 8 산업용 듀얼 밴드, 2x2 MIMO Wi-Fi®, Bluetooth® 및 Bluetooth Smart 모듈
다운로드 옵션
인증

WL18XX-CERTIFICATION — WiLink™ 8에 대한 무선 인증

WiLink™ 8 모듈 인증 지원을 찾고 계십니까? WL18XX-CERTIFCATION은 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.
View Options
인증

WL18XX-REPORTS — Reports: WL18XX Regulatory Certification Reports

Are you looking for WiLink™ 8 module certification support? WL18XX-CERTIFCATION provides the relevant information and support for successful certification of your product. Within this page you will find the latest certification reports of our Modules as well as our evaluation boards.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Wi-Fi 제품
WL1801MOD — WiLink™ 8 싱글 밴드 Wi-Fi® 모듈 WL1805MOD — WiLink™ 8 싱글 밴드, 2x2 MIMO Wi-Fi® 모듈 WL1807MOD — WiLink™ 8 산업용 이중 대역 콤보, 2x2 MIMO Wi-Fi 모듈 WL1831MOD — WiLink™ 8 산업용 Wi-Fi, Bluetooth 및 Bluetooth Smart(저에너지) 모듈 WL1835MOD — WiLink™ 8 싱글 밴드 콤보 2x2 MIMO Wi-Fi®, Bluetooth® 및 Bluetooth Smart 모듈 WL1837MOD — WiLink™ 8 산업용 듀얼 밴드, 2x2 MIMO Wi-Fi®, Bluetooth® 및 Bluetooth Smart 모듈
하드웨어 개발
도터 카드
WL1835MODCOM8B — WiLink™ 8 모듈 2.4GHz Wi-Fi® + Bluetooth® COM8 평가 모듈 WL1837MODCOM8I — WiLink™ 8 듀얼 밴드 2.4 및 5GHz Wi-Fi® + Bluetooth® COM8 평가 모듈
다운로드 옵션
설계 툴

WILINK-DESIGN-REVIEWS — WL18xx 장치에 대한 하드웨어 설계 검토

To get started with the WiLink™ hardware design review process:
  • Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see WL18xx product page links below).
  • Step 2: Download and (...)
사용 설명서: PDF | HTML
요청
레퍼런스 디자인

TIDC-WL1837MOD-AUDIO-MULTIROOM-CAPE — TI WiLink™ 8 Wi-Fi®/Bluetooth®/Bluetooth 저에너지 오디오 멀티룸 케이프 레퍼런스 디자인

The TI WiLink™ 8 WL1837MOD audio cape is a wireless multi-room audio reference design used with BeagleBone Black (featuring TI Sitara™ AM335x). The WiLink 8 device's WLAN capability to capture and register precise arrival time of the connected AP's beacon is used to achieve ultra-precise (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDC-WL1835MODCOM8B — WiLink™ 1835 모듈의 2.4 및 WiFi® + Bluetooth® 인증 안테나 설계

The WiLink 1835 Module Antenna Design is a reference design that combines the functionalities of the WiLink 8 module with a built-in antenna on a single board, implementing the module in the way it's been certified. Through this, customers are able to evaluate the performance of the module through (...)
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
QFM (MOC) 100 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상