DLPC200
- Required for Reliable Operation of the DLP5500 DMD
- Stream Data Realtime With Two 24-Bit Input Ports (RGB888)
- Port 1 Supports HDMI Input
- Port 2 Supports Input Via an Expansion Card
- High-Speed Pattern Sequence Mode
- Download Pattern Data Directly to Device
- 1-Bit Binary Pattern Rates to 5000 Hz
- 8-Bit Grayscale Pattern Rates to 700 Hz
- 1-to-1 Input Mapping to Micromirrors
- Programmable Reordering of Patterns
- Easy Synchronization With Cameras and Sensors
- Three Configurable Output Triggers
- Two Configurable Input Triggers
- Multiple Configuration Interfaces
- Supports EDID Via I2C
- USB and SPI Device Control
The DLPC200 performs image processing and control and DMD data formatting to drive the 0.55 XGA DMD (DLP5500).
This digital controller gives users reliable, independent high-speed micromirror control. It is used for structured light, display, and other spatial light modulation (SLM) applications. Solid state illumination (SSI) technology provides pattern rates up to 5000 Hz binary or 700 Hz 8-bit grayscale.
This easily-programmable device allows users to interface and synchronize the chipset to external sources (for example, sensor, camera, and processor) enabling 3D machine vision applications with high accuracy. Multiple configuration interfaces offer flexibility for external and embedded input sources. Because the DLPC200 conveniently loads and stores custom patterns it is ideal for advanced light control applications.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DLPC200 DLP Digital Controller for the DLP5500 DMD datasheet (Rev. F) | PDF | HTML | 2018年 5月 18日 |
* | Errata | DLP Products Technical Advisory | 2014年 1月 20日 | |
Application brief | Highly Scalable TI DLP Technology for 3D Machine Vision | PDF | HTML | 2021年 7月 6日 | |
User guide | DLPC200 SPI Slave Interface (Rev. C) | 2018年 3月 23日 | ||
Application note | DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) | 2018年 2月 23日 | ||
Application note | DLP LightCommander API Application Report (Rev. C) | 2013年 6月 5日 | ||
Application note | DLP LightCommander API Reference Manual (Rev. C) | 2013年 5月 13日 | ||
Application note | Using DLP® Development Kits for 3D Optical Metrology Systems | 2011年 5月 13日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLPR200 — DLPC200 配置和支援韌體
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
≥ 0.47 吋陣列產品
≤ 0.47 吋陣列 pico 產品
UV 產品 (< 400 nm)
可見產品 (420 至 700 nm)
光譜與光學網路產品
外部照明與投影產品
顯示產品
Near-infrared products (> 700 nm)
多通道 IC (PMIC)
硬體開發
開發板
開發套件
光學模組
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
BGA (ZEW) | 780 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點