DLPC1438
- Digital controller for DLP300S and DLP301S (0.3-inch 3.6-megapixel) DMDs
- 3D Printing Features:
- Linear gamma modes optimized for optimizing illumination uniformity and greyscale printing
- Programmable layer exposure time
- 8-bit monochrome greyscale output
- System Features:
- Front-end FPGA with low-cost SPI data input interface
- Actuator control
- I2C control of device configuration
- Programmable LED current control
- Operation optimized for reliable performance in DLP 3D printer applications
- Pair with DLPA2000, DLPA2005, DLPA3000, or DLPA3005 PMIC (power management integrated circuit) and LED driver
The DLPC1438 3D print controller supports reliable operation of the DLP300S and DLP301S digital micromirror devices (DMDs) for DLP 3D Printer applications. The DLPC1438 controller provides a convenient interface between user electronics and the DMD to enable fast, high resolution, reliable DLP 3D printers.
Get started with TI DLP® light-control technology page to learn how to get started with the DLP300S.
The DLP advanced light control resources on ti.com accelerate time to market, which include reference designs, optical modules manufactures, and DLP design network partners.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DLPC1438 3D Print Controller datasheet (Rev. A) | 2021年 7月 13日 | |
User guide | DLPC1438 Programmer's Guide | 2021年 2月 23日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
≥ 0.47 吋陣列產品
≤ 0.47 吋陣列 pico 產品
UV 產品 (< 400 nm)
可見產品 (420 至 700 nm)
光譜與光學網路產品
外部照明與投影產品
顯示產品
Near-infrared products (> 700 nm)
多通道 IC (PMIC)
硬體開發
開發板
開發套件
光學模組
TIDA-080010 — 3.6 百萬像素 3D 印表機參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
NFBGA (ZEZ) | 201 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。