DLPC300
- Required for Reliable Operation of the DLP3000
DMD - Multi-Mode, 24-Bit Input Port:
- Supports Parallel RGB With Pixel Clock Up to
33.5 MHz and 3 Input Color Bit-Depth Options:- 24-Bit RGB888 or 4:4:4 YCrCb888
- 18-Bit RGB666 or 4:4:4 YCrCb666
- 16-Bit RGB565 or 4:2:2 YCrCb565
- Supports 8-Bit BT.656 Bus Mode With Pixel
Clock Up to 33.5 MHz
- Supports Parallel RGB With Pixel Clock Up to
- Supports Input Resolutions 608 × 684, 864 × 480,
854 × 480 (WVGA), 640 × 480 (VGA), 320 × 240
(QVGA) - Pattern Input Mode
- One-to-One Mapping of Input Data to
Micromirrors - 1-Bit Binary Pattern Rates up to 4000-Hz
- 8-Bit Grayscale Pattern Rates up to 120-Hz
- One-to-One Mapping of Input Data to
- Video Input Mode with Pixel Data Processing
- Supports 1- to 60-Hz Frame Rates
- Programmable Degamma
- Spatial-Temporal Multiplexing (Dithering)
- Automatic Gain Control
- Color Space Conversion
- Output Trigger Signal for Synchronizing With
Camera, Sensor, or Other Peripherals - System Control:
- I2C Control of Device Configuration
- Programmable Current Control of up to 3 LEDs
- Integrated DMD Reset Driver Control
- DMD Horizontal and Vertical Display Image
Flip
- Low-Power Consumption: Less than 93 mW
(Typical) - External Memory Support:
- 166-MHz Mobile DDR SDRAM
- 33.3-MHz Serial FLASH
- 176-Pin, 7 × 7 mm With 0.4-mm Pitch NFBGA
Package
The DLPC300 controller provides a convenient, multi-functional interface between user electronics and the DMD, enabling high-speed pattern rates (up to 4-kHz binary), providing LED control, and data formatting for multiple input resolutions. The DLPC300 digital controller, part of the DLP3000 chipset, is required for reliable operation of the DLP3000 DMD. The DLPC300 also outputs a trigger signal for synchronizing displayed patterns with a camera, sensor, or other peripherals.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DLPC300 DLP® Digital Controller for the DLP3000 DMD datasheet (Rev. C) | PDF | HTML | 2015年 8月 1日 |
* | Errata | DLP® LightCrafter™ NAND Failures Resolution | 2013年 12月 23日 | |
* | Errata | DLP® LightCrafter™ USB Connectivity Solutions (Rev. A) | 2012年 8月 16日 | |
Design guide | Portable Point Cloud Generation 3D Scanning Using DLP Technology User's Guide (Rev. A) | 2016年 5月 13日 | ||
User guide | DLP Software Development Kit (SDK) User's Guide | 2016年 4月 28日 | ||
Application note | Creating Multiple Bit Depth and Multiple Color Pattern Sequences for the DLP® Li (Rev. A) | 2013年 10月 29日 | ||
Application note | DLP® LightCrafter™ FPGA Overview | 2013年 8月 27日 | ||
Application note | DLP 0.3 WVGA Chipset Data Sheet (Rev. A) | 2013年 7月 31日 | ||
User guide | DLPC300 Programmer's Guide (Rev. B) | 2013年 7月 24日 | ||
White paper | Using the DLP LightCrafter to Trigger CCD Cameras from the Imaging Source | 2012年 3月 14日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLPR300 — DLPC300 配置和支援韌體
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
≥ 0.47 吋陣列產品
≤ 0.47 吋陣列 pico 產品
UV 產品 (< 400 nm)
可見產品 (420 至 700 nm)
光譜與光學網路產品
外部照明與投影產品
顯示產品
Near-infrared products (> 700 nm)
多通道 IC (PMIC)
硬體開發
開發板
開發套件
光學模組
TIDA-00361 — 適用於 3D 掃描的可攜式點雲產生 (採用 DLP® 技術) 參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
NFBGA (ZVB) | 176 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。