DLPC231S-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to +105°C ambient operating temperature
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional Safety Quality-Managed
- Documentation available to aid ISO 26262 functional safety system design up to ASIL-B
- DMD display controller supporting:
- DLP553xS-Q1 and DLP462xS-Q1 automotive interior display chipsets
- Video processing
- Scales input image to match DMD resolution
- Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
- Support for pixel doubling or quadrupling to allow low resolution video input
- Gamma correction
- Embedded processor with error correction (ECC)
- On-chip diagnostic and self-test capability
- System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
- Integrated management of smooth dimming
- Configurable GPIO
- No external RAM required, internal SRAM for image processing
- 600MHz SubLVDS DMD interface for low power and emission
- Spread spectrum clocking for reduced EMI
- Video input interface
- Single OpenLDI (FPD-Link I) port up to 110MHz
- 24-bit RGB parallel interface up to 110MHz
- Configurable host control interface
- Serial peripheral interface (SPI) 10MHz
- I2C (400kHz)
- Host IRQ signal to provide real-time feedback for critical system errors
- Interface to TPS99000S-Q1 system management and illumination controller
The DLPC23xS-Q1 digital micromirror device (DMD) Controller for automotive applications is used in chipsets for interior and exterior display applications with a functional safety requirement (such as augmented reality HUDs and windshield clusters). The DLP5530S-Q1 chipset includes a 0.55” DMD and the DLP4620S-Q1 chipset includes a 0.46" DMD. Both chipsets also include the TPS99000S-Q1 System Management and Illumination controller. The DLPC23xS-Q1 integrates an embedded processor with error code correction (SECDED ECC), enabling host control and real-time feedback, on-chip diagnostics, and system monitoring functions. On-chip SRAM is included to remove the need for external DRAM. Combined with the TPS99000S-Q1, the DLPC23xS-Q1 supports high dynamic range dimming of over 5000:1 for HUD applications. SubLVDS 600MHz DMD interface allows high DMD refresh rates to generate seamless and brilliant digital images, while simultaneously reducing radiated emissions.
To aid in the design and manufacture of automotive qualified projectors based on DLP technology, there are a number of established optical module manufacturers and design houses that can be leveraged to support your design.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DLPC23xS-Q1 Automotive Digital Micromirror Device Controller datasheet (Rev. E) | PDF | HTML | 2024年 8月 20日 |
Functional safety information | Functional Safety Manual for DLP4620S-Q1, DLPC231S-Q1, and TPS99000S-Q1 | PDF | HTML | 2024年 2月 9日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DLP-HUD-LUMEN-CALC — AR HUD Lumen Budget Estimation Calculator
支援產品和硬體
產品
外部照明與投影產品
顯示產品
硬體開發
開發板
光學模組
DLP-HUD-VOLUME-CALC — AR HUD Volume Estimation Calculator
支援產品和硬體
產品
外部照明與投影產品
顯示產品
硬體開發
開發板
光學模組
軟體
計算工具
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
支援產品和硬體
產品
≥ 0.47 吋陣列產品
≤ 0.47 吋陣列 pico 產品
UV 產品 (< 400 nm)
可見產品 (420 至 700 nm)
光譜與光學網路產品
外部照明與投影產品
近紫外線產品 (400 至 420 nm)
顯示產品
Near-infrared products (> 700 nm)
多通道 IC (PMIC)
硬體開發
開發板
開發套件
光學模組
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
≥ 0.47 吋陣列產品
≤ 0.47 吋陣列 pico 產品
UV 產品 (< 400 nm)
可見產品 (420 至 700 nm)
光譜與光學網路產品
外部照明與投影產品
顯示產品
Near-infrared products (> 700 nm)
多通道 IC (PMIC)
硬體開發
開發板
開發套件
光學模組
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
NFBGA (ZEK) | 324 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。