DS110DF410
- Each Channel Independently Locks to Data Rates
from 8.5 to 11.3 Gbps and Sub-rates - Support for Subrates of Divide by 2/4/8
- Fast Lock Operation Based on Protocol-Select
Mode - Low Latency (∼300ps)
- Adaptive Equalization up to 34-dB Boost at 5 GHz
- Adjustable Transmit VOD: 600 to 1300 mVp-p
- Adjustable Transmit De-emphasis to –12 dB
- Typical Power Dissipation (EQ+DFE+CDR+DE):
180 mW/Channel - Programmable Output Polarity Inversion
- Input Signal Detection, CDR Lock
Detection/Indicator - On-Chip Eye Monitor (EOM), PRBS Generator
- Single 2.5-V ±5% Power Supply
- SMBus/EEPROM Configuration Modes
- Operating Temperature Range of –40 to 85°C
- WQFN 48-Pin 7-mm × 7-mm Package
- Easy Pin Compatible Upgrade Between Repeater
and Retimers- DS100RT410 (EQ+CDR+DE): 10.3125 Gbps
- DS100DF410 (EQ+DFE+CDR+DE): 10.3125
Gbps - DS110RT410 (EQ+CDR+DE): 8.5 – 11.3 Gbps
- DS110DF410 (EQ+DFE+CDR+DE): 8.5 – 11.3
Gbps - DS125RT410 (EQ+CDR+DE): 9.8 – 12.5 Gbps
- DS125DF410 (EQ+DFE+CDR+DE): 9.8 – 12.5
Gbps - DS100BR410 (EQ+DE): Up to 10.3125 Gbps
The DS110DF410 is a four channel retimer with integrated signal conditioning. The device includes a fully adaptive Continuous-Time Linear Equalizer (CTLE), self calibrating 5-tap Decision Feedback Equalizer (DFE), Clock and Data Recovery (CDR), and transmit De-Emphasis (DE) driver to enable data transmission over long, lossy and crosstalk-impaired highspeed serial links to achieve BER < 1×10–15.
Each channel can independently lock to data rates from 8.5 to 11.3 Gbps, and associated sub rates (div by 2, 4 and 8) to support a variety of communication protocols. A 25-MHz crystal oscillator clock is used to speed up the CDR lock process. This clock is not used for training the PLL and does not need to be synchronous with the serial data.
The programmable settings can be applied using the SMBus (I2C) interface, or they can be loaded via an external EEPROM. An on-chip eye monitor and a PRBS generator allow real-time measurement of high-speed serial data for system bring-up or field tuning.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DS110DF410 Low Power Multi-Rate Quad Channel Retimer datasheet (Rev. D) | PDF | HTML | 2015年 5月 6日 |
| Application note | Extend reach with Ethernet Redrivers and Retimers for 10G-12.5G Applications (Rev. A) | 2023年 1月 31日 | ||
| Application note | Implementing TI Retimers on 10G ZR and DWDM SFP+ Optical Links | 2019年 4月 8日 | ||
| Application brief | DS110DF111,DS125DF111, DS100DF410, DS110DF410, and DS125DF410 Programming Guide | 2019年 3月 25日 | ||
| EVM User's guide | DS100DF410EVK, DS110DF410EVK, DS125DF410EVM User's Guide (Rev. C) | 2016年 6月 22日 | ||
| Application note | Understanding EEPROM Programming for 10G to 12.5G Retimers | 2016年 1月 13日 | ||
| Application note | Selecting TI SigCon Devices for SFF-8431 SFP+ Applications | 2014年 5月 6日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DS110DF410EVM — DS110DF410EVM：具有適應性 EQ、CDR 和 DFE 的 8.5 至 11.3 Gbps 四通道重定時器評估模組
The DS110DF410EVM evaluation board allows the user to examine the advanced signal conditioning capabilities of the DS110DF410 and DS110RT410 devices using SMAs. The board is controlled by a PC using a USB port and the SigCon Architect GUI.
In order to use the SigCon Architect GUI to control the (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RHS) | 48 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。