首頁 電源管理 LED 驅動器 背光 LED 驅動器
首頁
電源管理
LED 驅動器
背光 LED 驅動器

LM3508

現行

同步磁性定電流白光 LED 驅動器

立即訂購
產品規格表

LM3508

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 10 Vout (max) (V) 17.5 Type Inductive Switching frequency (max) (kHz) 850 Duty cycle (max) (%) 91 LED current per channel (mA) 30 Peak efficiency (%) 85 Topology Boost Features OVP Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 10 Vout (max) (V) 17.5 Type Inductive Switching frequency (max) (kHz) 850 Duty cycle (max) (%) 91 LED current per channel (mA) 30 Peak efficiency (%) 85 Topology Boost Features OVP Operating temperature range (°C) -30 to 85 Rating Catalog
DSBGA (YZR) 9 3.0625 mm² 1.75 x 1.75
  • Drives 4 Series White LEDs with up to 30mA
  • >80% Peak Efficiency
  • Up to 100kHz PWM Brightness Control
  • Accurate ±5% LED Current Regulation across VIN range
  • Internal Synchronous PFET (No Schottky Diode Required)
  • True Shutdown Isolation
  • Output Short-Circuit Protection
  • 17.5V Over-Voltage Protection
  • Internal Soft-Start Eliminates Inrush Current
  • Wide Input Voltage Range: 2.7V to 5.5V
  • 850kHz Fixed Frequency Operation
  • Low Profile 9-Bump DSBGA Package (1.514mm x 1.514mm x 0.6mm)

All trademarks are the property of their respective owners.

  • Drives 4 Series White LEDs with up to 30mA
  • >80% Peak Efficiency
  • Up to 100kHz PWM Brightness Control
  • Accurate ±5% LED Current Regulation across VIN range
  • Internal Synchronous PFET (No Schottky Diode Required)
  • True Shutdown Isolation
  • Output Short-Circuit Protection
  • 17.5V Over-Voltage Protection
  • Internal Soft-Start Eliminates Inrush Current
  • Wide Input Voltage Range: 2.7V to 5.5V
  • 850kHz Fixed Frequency Operation
  • Low Profile 9-Bump DSBGA Package (1.514mm x 1.514mm x 0.6mm)

All trademarks are the property of their respective owners.

The LM3508 is a synchronous boost converter (no external Schottky diode required) that provides a constant current output. It is designed to drive up to 4 series white LEDs at 30mA from a single-cell Li-Ion battery. A single low power external resistor is used to set the maximum LED current. The LED current can be adjusted by applying a PWM signal of up to 100kHz to the DIM pin. Internal soft-start circuitry is designed to eliminate high in-rush current at start-up. For maximum safety, the device features an advanced short-circuit protection when the output is shorted to ground. Additionally, over-voltage protection and an 850kHz switching frequency allow for the use of small, low-cost output capacitors with lower voltage ratings. During shutdown, the output is disconnected from the input preventing a leakage current path through the LEDs to ground. The LM3508 is available in a tiny 9-bump chip-scale DSBGA package.

The LM3508 is a synchronous boost converter (no external Schottky diode required) that provides a constant current output. It is designed to drive up to 4 series white LEDs at 30mA from a single-cell Li-Ion battery. A single low power external resistor is used to set the maximum LED current. The LED current can be adjusted by applying a PWM signal of up to 100kHz to the DIM pin. Internal soft-start circuitry is designed to eliminate high in-rush current at start-up. For maximum safety, the device features an advanced short-circuit protection when the output is shorted to ground. Additionally, over-voltage protection and an 850kHz switching frequency allow for the use of small, low-cost output capacitors with lower voltage ratings. During shutdown, the output is disconnected from the input preventing a leakage current path through the LEDs to ground. The LM3508 is available in a tiny 9-bump chip-scale DSBGA package.
filter 尋找其它 背光 LED 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM3508 Synchronous Magnetic Constant Current White LED Driver datasheet (Rev. C) 2013年 5月 3日
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 2024年 4月 30日
White paper Common LED Functions and LED Driver Design Considerations 2020年 9月 21日
Application note Analog PWM Dimming in White-LED Drivers 2016年 12月 21日
EVM User's guide AN-1593 LM3508 Evaluation Board 2007年 6月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM3508TLEV — LM3508TL 評估板

The LM3508 is a synchronous boost converter (no external Schottky diode required) that provides a constant current output. It is designed to drive up to 4 series white LEDs at 30mA from a single-cell Li-Ion battery. A single low power external resistor is used to set the maximum LED current. The (...)

使用指南: PDF
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YZR) 9 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片