首頁 介面 序列數位介面 (SDI) IC
首頁
介面
序列數位介面 (SDI) IC

LMH0303

現行

具纜線偵測功能的 3G HD/SD SDI 纜線驅動器

立即訂購
產品規格表

LMH0303

現行
產品規格表 立即訂購

產品詳細資料

Function Cable driver Supply voltage (V) 3.3 Power consumption (mW) 155 Data rate (max) (Mbps) 2970 Control interface Pin, SMBus Operating temperature range (°C) -40 to 85
Function Cable driver Supply voltage (V) 3.3 Power consumption (mW) 155 Data rate (max) (Mbps) 2970 Control interface Pin, SMBus Operating temperature range (°C) -40 to 85
WQFN (RUM) 16 16 mm² 4 x 4
  • Supports ST 424 (3G), 292 (HD), and 259 (SD)
  • Data Rates up to 2.97 Gbps
  • Supports DVB-ASI at 270 Mbps
  • Cable Detect on Output
  • Loss of Signal Detect at Input
  • Output Driver Power-Down Control
  • Typical Power Consumption: 130 mW in SD Mode
    and 155 mW in HD Mode
  • Typical Power Consumption of the Power-Save
    Mode: 4 mW
  • Single 3.3-V Supply Operation
  • 75-Ω Single-Ended Outputs
  • 100-Ω Differential Input
  • Selectable Slew Rate
  • Industrial Temperature Range: –40°C to 85°C
  • 16-Pin WQFN Package
  • Footprint Compatible With the LMH0302
  • Supports ST 424 (3G), 292 (HD), and 259 (SD)
  • Data Rates up to 2.97 Gbps
  • Supports DVB-ASI at 270 Mbps
  • Cable Detect on Output
  • Loss of Signal Detect at Input
  • Output Driver Power-Down Control
  • Typical Power Consumption: 130 mW in SD Mode
    and 155 mW in HD Mode
  • Typical Power Consumption of the Power-Save
    Mode: 4 mW
  • Single 3.3-V Supply Operation
  • 75-Ω Single-Ended Outputs
  • 100-Ω Differential Input
  • Selectable Slew Rate
  • Industrial Temperature Range: –40°C to 85°C
  • 16-Pin WQFN Package
  • Footprint Compatible With the LMH0302

The LMH0303 device is designed for use in ST 424, ST 292, ST 344, and ST 259 serial digital video applications. The LMH0303 drives 75-Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.

The LMH0303 includes intelligent sensing capabilities to improve system diagnostics. The cable detect feature senses near-end termination to determine if a cable is correctly attached to the output BNC. Input loss of signal (LOS) detects the presence of a valid signal at the input of the cable driver. These sensing features may be used to alert the user of a system fault and activate a deep power-save mode, reducing the power consumption of the cable driver to 4 mW. These features are accessible through an SMBus interface.

The LMH0303 provides two selectable slew rates for ST 259 and ST 424 or 292. The output amplitude is adjustable ±10% in 5-mV steps through the SMBus.

The LMH0303 is powered from a single 3.3-V supply. Power consumption is typically 130 mW in SD mode and 155 mW in HD mode. The LMH0303 is available in a 16-pin WQFN package.

The LMH0303 device is designed for use in ST 424, ST 292, ST 344, and ST 259 serial digital video applications. The LMH0303 drives 75-Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.

The LMH0303 includes intelligent sensing capabilities to improve system diagnostics. The cable detect feature senses near-end termination to determine if a cable is correctly attached to the output BNC. Input loss of signal (LOS) detects the presence of a valid signal at the input of the cable driver. These sensing features may be used to alert the user of a system fault and activate a deep power-save mode, reducing the power consumption of the cable driver to 4 mW. These features are accessible through an SMBus interface.

The LMH0303 provides two selectable slew rates for ST 259 and ST 424 or 292. The output amplitude is adjustable ±10% in 5-mV steps through the SMBus.

The LMH0303 is powered from a single 3.3-V supply. Power consumption is typically 130 mW in SD mode and 155 mW in HD mode. The LMH0303 is available in a 16-pin WQFN package.
filter 尋找其它 序列數位介面 (SDI) IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet LMH0303 3-Gbps HD/SD SDI Cable Driver With Cable Detect datasheet (Rev. H) PDF | HTML 2016年 5月 26日
Application note 3G-SDI Cable Driver Compatibility Guide – TI / MACOM 2017年 9月 13日
Application note 3G-SDI Cable Driver Compatibility Guide – TI / Semtech 2017年 9月 13日
Selection guide Broadcast and Professional Video Interface Solutions (Rev. E) 2017年 4月 5日
Application note AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) 2013年 4月 26日
Application note AN-1972 Board Layout Challenges in Serial Digital Interface (Rev. C) 2013年 4月 26日
Application note AN-2145 Power Considerations for SDI Products (Rev. B) 2013年 4月 26日
Application note AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) 2013年 4月 26日
User guide Single Dual 3Gbps HD SD SDI Cable Driver with Cable Detect Eval Bd User Guide 2012年 1月 26日
Application note High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems 2009年 11月 12日
Application note 3G-SDI: 32 Loop Cascade Analysis 2008年 10月 23日
Design guide Broadcast Video Owner's Manual 2006年 11月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發模組 (EVM) 的 GUI

SNLC043 — Analog LaunchPAD (ALP) Software

支援產品和硬體

支援產品和硬體

產品
序列數位介面 (SDI) IC
LMH0303 — 具纜線偵測功能的 3G HD/SD SDI 纜線驅動器 LMH0307 — 具纜線偵測的 3G HD/SD SDI 雙輸出纜線驅動器
硬體開發
開發板
SD307EVK — 具有電纜偵測的單/雙 3-Gbps HD/SD SDI 電纜驅動器評估版
下載
支援軟體

SNLC005 — SD303EVK / SD307EVK User Files

支援產品和硬體

支援產品和硬體

產品
序列數位介面 (SDI) IC
LMH0303 — 具纜線偵測功能的 3G HD/SD SDI 纜線驅動器 LMH0307 — 具纜線偵測的 3G HD/SD SDI 雙輸出纜線驅動器
硬體開發
開發板
SD307EVK — 具有電纜偵測的單/雙 3-Gbps HD/SD SDI 電纜驅動器評估版
下載
模擬型號

LMH0303 IBIS Model

SNLM010.ZIP (9 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RUM) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片