首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

LP8758-EA

現行

四個單相 4-A 輸出 DC-DC 降壓轉換器

立即訂購
產品規格表

LP8758-EA

現行
產品規格表 立即訂購

產品詳細資料

Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 3000 Product type Processor and FPGA
Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 3000 Product type Processor and FPGA
DSBGA (YFF) 35 6.6 mm² 2.2 x 3
  • Fully integrated quad buck, up to 4-A programmable maximum output current per buck
    • Auto PWM-PFM and forced-PWM operations
    • Programmable output voltage slew rate from 30 mV/µs to 0.5 mV/µs
    • Input voltage range: 2.5 V to 5.5 V
    • VOUT range: 0.5 V to 3.36 V with DVS
  • Programmable start-up and shutdown sequencing with enable signal
  • I2C-compatible interface that supports standard (100 kHz), fast (400 kHz), fast+ (1 MHz), and high-speed (3.4 MHz) modes
  • Interrupt function with programmable masking
  • Load current measurement
  • Output short-circuit and overload protection
  • Spread-spectrum mode for EMI reduction
  • The four buck cores operate 90° out of phase thereby reducing input ripple current
  • Overtemperature warning and protection
  • Undervoltage Lockout (UVLO)
  • Fully integrated quad buck, up to 4-A programmable maximum output current per buck
    • Auto PWM-PFM and forced-PWM operations
    • Programmable output voltage slew rate from 30 mV/µs to 0.5 mV/µs
    • Input voltage range: 2.5 V to 5.5 V
    • VOUT range: 0.5 V to 3.36 V with DVS
  • Programmable start-up and shutdown sequencing with enable signal
  • I2C-compatible interface that supports standard (100 kHz), fast (400 kHz), fast+ (1 MHz), and high-speed (3.4 MHz) modes
  • Interrupt function with programmable masking
  • Load current measurement
  • Output short-circuit and overload protection
  • Spread-spectrum mode for EMI reduction
  • The four buck cores operate 90° out of phase thereby reducing input ripple current
  • Overtemperature warning and protection
  • Undervoltage Lockout (UVLO)

The LP8758-EA device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-EA supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-EA device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.

The LP8758-EA device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-EA supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-EA device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.
filter 尋找其它 多通道 IC (PMIC)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS659128 現行 適用處理器電源的 PMU Similar functionality but pre-programmed to power the same application processor

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LP8758-EA Four 4-A Output Synchronous Step-Down DCDC Converters datasheet PDF | HTML 2021年 4月 30日
User guide LP8758 Quick Sample Module User Guide PDF | HTML 2022年 8月 25日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP8758-E0EVM — LP8758-E0 四路輸出降壓 DC-DC 穩壓器評估模組

The LP8758-E0EVM customer evaluation module demonstrates the LP8758-E0 device from Texas Instruments. The LP8758-E0 is designed to meet the power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC (...)

使用指南: PDF
TI.com 無法提供
開發模組 (EVM) 的 GUI

SNVC189 — LP8758-xxEVM GUI

支援產品和硬體

支援產品和硬體

產品
多通道 IC (PMIC)
LP8758-B0 — 四相單 16A 輸出 DC-DC 降壓轉換器 LP8758-E0 — 四個單相 4-A 輸出 DC-DC 降壓轉換器 LP8758-E3 — 四個單相 4-A 輸出 DC-DC 降壓轉換器 LP8758-EA — 四個單相 4-A 輸出 DC-DC 降壓轉換器
硬體開發
開發板
LP8758-E0EVM — LP8758-E0 四路輸出降壓 DC-DC 穩壓器評估模組 LP8758EVM — LP8758-B0 四相 DC-DC 降壓轉換器評估模組
下載
支援軟體

SNVC186 — LP8758EVM Qt Source

支援產品和硬體

支援產品和硬體

產品
多通道 IC (PMIC)
LP8758-B0 — 四相單 16A 輸出 DC-DC 降壓轉換器 LP8758-E0 — 四個單相 4-A 輸出 DC-DC 降壓轉換器 LP8758-E3 — 四個單相 4-A 輸出 DC-DC 降壓轉換器 LP8758-EA — 四個單相 4-A 輸出 DC-DC 降壓轉換器
硬體開發
開發板
LM26480SQ-AAEV — LM26480SQ-AA 評估模組：可配置電源管理 IC (PMIC)，具有 2 個 DC/DC 和 2 個 LDO LP8758EVM — LP8758-B0 四相 DC-DC 降壓轉換器評估模組
下載
計算工具

PEET-GUI — PMIC 效率評估器工具 (PEET)

The PMIC Efficiency Estimator Tool (PEET GUI) is a graphical user interface used to easily evaluate PMIC DC/DC regulator efficiency relative to your design conditions. The PEET GUI can be used to configure each DC/DC regulator separately and provides real-time efficiency and power dissipation data (...)
在雲端評估
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 35 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片