首頁 放大器 全差分放大器
首頁
放大器
全差分放大器

THS4524

現行

極低功耗四通道軌至軌輸出全差動放大器

立即訂購
產品規格表

THS4524

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 BW at Acl (MHz) 145 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 490 Architecture Bipolar, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 4.6 Iq per channel (typ) (mA) 1.14 Rail-to-rail In to V-, Out Vos (offset voltage at 25°C) (max) (mV) 2 Operating temperature range (°C) -40 to 85 Iout (typ) (mA) 55 2nd harmonic (dBc) 133 3rd harmonic (dBc) 141 Frequency of harmonic distortion measurement (MHz) 0.001 GBW (typ) (MHz) 95 Input bias current (max) (pA) 900000 Features Shutdown CMRR (typ) (dB) 102 Rating Catalog
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 BW at Acl (MHz) 145 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 490 Architecture Bipolar, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 4.6 Iq per channel (typ) (mA) 1.14 Rail-to-rail In to V-, Out Vos (offset voltage at 25°C) (max) (mV) 2 Operating temperature range (°C) -40 to 85 Iout (typ) (mA) 55 2nd harmonic (dBc) 133 3rd harmonic (dBc) 141 Frequency of harmonic distortion measurement (MHz) 0.001 GBW (typ) (MHz) 95 Input bias current (max) (pA) 900000 Features Shutdown CMRR (typ) (dB) 102 Rating Catalog
TSSOP (DBT) 38 62.08 mm² 9.7 x 6.4
  • Fully Differential Architecture
  • Bandwidth: 145 MHz (AV = 1 V/V)
  • Slew Rate: 490 V/µs
  • HD2: –133 dBc at 10 kHz (1 VRMS,
    RL = 1 kΩ)
  • HD3: –141 dBc at 10 kHz (1 VRMS,
    RL = 1 kΩ)
  • Input Voltage Noise: 4.6 nV/√Hz
    (f = 100 kHz)
  • THD+N: –112dBc (0.00025%) at
    1 kHz (22-kHz BW, G = 1, 5 VPP)
  • Open-Loop Gain: 119 dB (DC)
  • NRI–Negative Rail Input
  • RRO–Rail-to-Rail Output
  • Output Common-Mode Control
    (with Low Offset)
  • Power Supply:
    • Voltage: +2.5 V (±1.25 V) to
      +5.5 V (±2.75 V)
    • Current: 1.14 mA/ch
  • Power-Down Capability: 20 µA (typical)
  • Fully Differential Architecture
  • Bandwidth: 145 MHz (AV = 1 V/V)
  • Slew Rate: 490 V/µs
  • HD2: –133 dBc at 10 kHz (1 VRMS,
    RL = 1 kΩ)
  • HD3: –141 dBc at 10 kHz (1 VRMS,
    RL = 1 kΩ)
  • Input Voltage Noise: 4.6 nV/√Hz
    (f = 100 kHz)
  • THD+N: –112dBc (0.00025%) at
    1 kHz (22-kHz BW, G = 1, 5 VPP)
  • Open-Loop Gain: 119 dB (DC)
  • NRI–Negative Rail Input
  • RRO–Rail-to-Rail Output
  • Output Common-Mode Control
    (with Low Offset)
  • Power Supply:
    • Voltage: +2.5 V (±1.25 V) to
      +5.5 V (±2.75 V)
    • Current: 1.14 mA/ch
  • Power-Down Capability: 20 µA (typical)

The THS4521, THS4522, and THS4524 family of devices are very low-power, fully differential amplifiers with rail-to-rail output and an input common-mode range that includes the negative rail. These amplifiers are designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter, and provide exceptional performance in audio applications.

The family includes single FDA (THS4521), dual FDA (THS4522), and quad FDA (THS4524) versions.

These fully differential amplifiers feature accurate output common-mode control that allows for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, these devices are ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single +2.5V to +5V and ground power supply.

The THS4521, THS4522, and THS4524 family of fully differential amplifiers is characterized for operation over the full industrial temperature range from –40°C to +85°C.

The THS4521, THS4522, and THS4524 family of devices are very low-power, fully differential amplifiers with rail-to-rail output and an input common-mode range that includes the negative rail. These amplifiers are designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter, and provide exceptional performance in audio applications.

The family includes single FDA (THS4521), dual FDA (THS4522), and quad FDA (THS4524) versions.

These fully differential amplifiers feature accurate output common-mode control that allows for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, these devices are ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single +2.5V to +5V and ground power supply.

The THS4521, THS4522, and THS4524 family of fully differential amplifiers is characterized for operation over the full industrial temperature range from –40°C to +85°C.
filter 尋找其它 全差分放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet THS452x Very Low Power, Negative Rail Input, Rail-To-Rail Output, Fully Differential Amplifier datasheet (Rev. H) PDF | HTML 2015年 6月 18日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Application note Fully-Differential Amplifiers (Rev. E) 2016年 9月 19日
Analog Design Journal Using fully differential op amps as attenuators, Part 3 2009年 10月 4日
EVM User's guide THS4521/45222/4524EVM User's Guide 2009年 7月 16日
Analog Design Journal Using fully differential op amps as attenuators, Part 2 2009年 7月 14日
Analog Design Journal Analysis of fully differential amplifiers 2005年 3月 11日
Analog Design Journal Designing for low distortion with high-speed op amps 2005年 3月 2日
Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

THS4524EVM — THS4524 評估模組

The THS4524EVM is an evaluation module for the quad, THS4524 in the DBT (38-lead TSSOP) package.

The THS4524EVM is designed to quickly and easily demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal source, and test instruments through the use (...)

使用指南: PDF
TI.com 無法提供
模擬型號

THS4524 PSpice Model (Rev. B)

SBOMA76B.ZIP (22 KB) - PSpice Model
下載
模擬型號

THS4524 TINA-TI Reference Design (Rev. A)

SBOMA77A.TSC (66 KB) - TINA-TI Reference Design
下載
模擬型號

THS4524 TINA-TI Spice Model (Rev. A)

SBOMA78A.ZIP (16 KB) - TINA-TI Spice Model
下載
計算工具

SBOR022 — TI FDA Calculator

支援產品和硬體

支援產品和硬體

產品
全差分放大器
LMH6550 — 400MHz 差動高速運算放大器 LMH6551 — 370MHz 差動高速運算放大器 LMH6552 — 1.5 GHz 全差動放大器 LMH6553 — 具輸出限制箝位的 900 MHz 全差動放大器 LMH6554 — 2.8 GHz 超線性全差動放大器 LMP8350 — 具可選功耗模式的超低失真全差動精密 ADC 驅動器 OPA862 — 12.6V、低雜訊、單端到差分、高輸入阻抗放大器 THS4120 — 具有關機功能的 3.3 V、100 MHz、43 V/us、全差分 CMOS 放大器 THS4121 — 3.3 V、100 MHz、43 V/us、全差分 CMOS 放大器 THS4130 — 具有關機功能的 150MHz 全差分輸入/輸出低雜訊放大器 THS4131 — 全差分輸入/輸出低雜訊放大器 THS4140 — 具有關機功能的 160MHz 全差分輸入/輸出高電壓轉換率放大器 THS4141 — 160MHz 全差分輸入/輸出高電壓轉換率放大器 THS4150 — 具有關機功能的 150MHz 全差分輸入/輸出高電壓轉換率放大器 THS4151 — 150MHz 全差分輸入/輸出高電壓轉換率放大器 THS4500 — 具有斷電功能的 15V 高速全差分放大器 THS4501 — 高速全差動放大器，+/-5V THS4503 — 高速全差分放大器 THS4504 — 具有關機功能的寬頻低失真全差分放大器 THS4505 — 寬頻、低失真、全差動放大器 THS4508 — 寬頻全差分放大器 THS4509 — 1.9-GHz、寬頻、低雜訊、低失真、全差分放大器 THS4511 — 1.6-GHz、均一增益、寬頻、低雜訊、低失真、全差分放大器 THS4513 — 1.6-GHz、最小增益 1-V/V、低雜訊、低失真、全差動放大器 THS4520 — 軌至軌輸出寬頻全差動放大器 THS4521 — 極低功耗軌至軌輸出全差動放大器 THS4522 — 極低功率雙通道軌至軌輸出全差動放大器 THS4524 — 極低功耗四通道軌至軌輸出全差動放大器 THS4531 — 超低功耗 0.25mA、RRO、全差分放大器 THS4531A — 超低功耗、RRO、全差動放大器 THS4532 — 雙路、超低功耗 0.25mA、RRO、全差動放大器 THS4541 — 高速差分 I/O 放大器 THS4551 — 低雜訊、精密、150MHz、全差分放大器 THS4552 — 雙通道、低雜訊、精密、150-MHz、全差分放大器 THS4561 — 低功耗、60MHz、寬電源供電範圍全差分放大器 THS4567 — 具有 VICM 和 VOCM 控制的 220 MHz CMOS 輸入全差動放大器 THS770006 — 具 +6dB 固定增益的高速全差動 ADC 驅動器放大器
音訊運算放大器
OPA1637 — 高保真、高電壓 (36V)、低雜訊 (3.7nV/rtHz) Burr-Brown™ 音訊全差動放大器
精密度運算放大器 (Vos<1mV)
THP210 — 高精密度 (40-μV、0.1μV/C)、高電壓 (36-V)、低雜訊 (3.7-nV/√Hz)、全差動放大器
射頻 (RF) 與微波
LMH3401 — 7 GHz 超寬頻全差動放大器 LMH5401 — 8 GHz 超寬頻全差動放大器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (DBT) 38 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片