首頁 電源管理 LED 驅動器 汽車 LED 驅動器
首頁
電源管理
LED 驅動器
汽車 LED 驅動器

TL4242

現行

可調式 LED 驅動器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPS92620-Q1 現行 具熱共享功能的車用二通道高電流 40-V 高壓側 LED 驅動器 2 total channels instead of 1, thermal sharing capabilities, and rated for automotive.

TL4242

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Topology Current Source Rating Catalog Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) -1 Vout (max) (V) 41 Iout (max) (A) 0.5 Iq (typ) (mA) 12 Features Enable/Shutdown, Fault Detection, Thermal shutdown
Number of channels 1 Topology Current Source Rating Catalog Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) -1 Vout (max) (V) 41 Iout (max) (A) 0.5 Iq (typ) (mA) 12 Features Enable/Shutdown, Fault Detection, Thermal shutdown
WSON (DRJ) 8 16 mm² 4 x 4
  • Adjustable Constant Current up to 500 mA (±5%)
  • PWM Brightness Regulation
  • Wide Input Voltage Range up to 42 V
  • Low Drop Voltage
  • Open-Load Detection
  • Overtemperature Protection
  • Short-Circuit Proof
  • Reverse-Polarity Proof
  • Wide Temperature Range: –40°C to 150°C
  • Adjustable Constant Current up to 500 mA (±5%)
  • PWM Brightness Regulation
  • Wide Input Voltage Range up to 42 V
  • Low Drop Voltage
  • Open-Load Detection
  • Overtemperature Protection
  • Short-Circuit Proof
  • Reverse-Polarity Proof
  • Wide Temperature Range: –40°C to 150°C

The TL4242 device is an integrated, adjustable, constant-current source that can drive loads up to 500 mA. The output current level can be adjusted through an external resistor. The device is designed to supply high-power LEDs. The TL4242 is provided in the DRJ (WSON) package. Protection circuits prevent damage to the device in case of overload, short circuit, reverse polarity, and overtemperature. The connected LEDs are protected against reverse polarity as well as excess voltages up to 45 V.

The integrated PWM input of the TL4242 permits LED brightness regulation by pulse-width modulation (PWM). Due to the high input impedance of the PWM input, the LED driver can be operated as a protected high-side switch.

The TL4242 is characterized for operation from –40°C to 150°C.

The TL4242 device is an integrated, adjustable, constant-current source that can drive loads up to 500 mA. The output current level can be adjusted through an external resistor. The device is designed to supply high-power LEDs. The TL4242 is provided in the DRJ (WSON) package. Protection circuits prevent damage to the device in case of overload, short circuit, reverse polarity, and overtemperature. The connected LEDs are protected against reverse polarity as well as excess voltages up to 45 V.

The integrated PWM input of the TL4242 permits LED brightness regulation by pulse-width modulation (PWM). Due to the high input impedance of the PWM input, the LED driver can be operated as a protected high-side switch.

The TL4242 is characterized for operation from –40°C to 150°C.
filter 尋找其它 汽車 LED 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TL4242 500-mA, Adjustable, Constant-Current LED Driver datasheet (Rev. B) PDF | HTML 2014年 3月 5日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
User guide TL4242EVM-543 User's Guide 2009年 10月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TL4242 TINA-TI Reference Design

SLVM419.TSC (35 KB) - TINA-TI Reference Design
下載
模擬型號

TL4242 TINA-TI Spice Model

SLVM391.ZIP (13 KB) - TINA-TI Spice Model
下載
模擬型號

TL4242 Unencrypted PSpice Model Package (Rev. B)

SLVM658B.ZIP (60 KB) - PSpice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DRJ) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片