TLV717P
- Very Low Dropout: 215 mV at 150 mA
- Accuracy: 0.5% (typical)
- Low IQ: 35 µA
- Available in Fixed-Output Voltages:
1.2 V to 5 V - High PSRR:
- 70 dB at 1 kHz
- 50 dB at 1 MHz
- Stable With Effective Output Capacitance:
0.1 µF - Foldback Current Limit
- Package: 1-mm × 1-mm DQN(1)(2)
The TLV717P series of low-dropout (LDO) linear regulators are low quiescent current LDOs with excellent line and load transient performance and are designed for power-sensitive applications. These devices provide a typical accuracy of 0.5%.
The TLV717P series offer current foldback that throttles down the output current with a decrease in load resistance. The typical value at which current foldback initiates is 350 mA; the typical value of the output short current limit value is 40 mA.
Furthermore, these devices are stable with an effective output capacitance of only 0.1 µF. This feature enables the use of cost-effective capacitors that have higher bias voltages and temperature derating. The devices regulate to specified accuracy with no output load.
The TLV717P series is available in a 1-mm × 1-mm DQN package that makes them ideal for hand-held applications. The TLV717P provides an active pulldown circuit to quickly discharge output loads.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TLV717P 150-mA, Low-Dropout Regulator With Foldback Current Limit for Portable Devices datasheet (Rev. B) | PDF | HTML | 2012年 5月 29日 |
Technical article | LDO basics: Current limit | PDF | HTML | 2017年 5月 25日 | |
EVM User's guide | TLV71733PEVM-072 User's Guide | 2011年 10月 31日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
BOOST-CC2564MODA — TMP107 溫度感測器菊輪鍊 BoosterPack™ 插入式模組
The BOOST-CC2564MODA BoosterPack™ plug-in module is intended for evaluation and design purposes of the dual-mode Bluetooth® CC2564 module with integrated antenna (CC2564MODA). The CC2564MODA module is based on TI's dual-mode Bluetooth® CC2564B Controller, which reduces design (...)
MULTIPKGLDOEVM-823 — 支援 DBV、DRB、DRV 和 DQN 封裝的通用 LDO 線性穩壓器評估模組
MULTIPKGLDOEVM-823 評估模組 (EVM) 可協助您評估多種常用線性穩壓器封裝的運作與性能,以供電路應用使用。此特定 EVM 配置具有 DRB、DRV、DQN 和 DBV 元件封裝,能讓您焊接並評估低壓差 (LDO) 穩壓器。
CC256XMS432BTBLESW — MSP432 MCU 的 TI 雙模式藍牙架構
TIDA-00021 — Intel IMVP7 第三代 Core Mobile (Core i7) 電源管理參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
X2SON (DQN) | 4 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。