TLV742P

現行

200mA、低 IQ 低壓差 (LDO) 電壓穩壓器

產品詳細資料

Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Rating Catalog Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Rating Catalog Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
X2SON (DQN) 4 1 mm² 1 x 1
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
TLV707P 現行 具主動輸出放電和啓用功能的 200-mA 低 IQ, 低壓降電壓穩壓器 Previous generation of this device that is pin-to-pin
最新 TLV773 現行 具啟用功能的 300mA 高 PSRR 低 IQ 低壓降穩壓器 General purpose LDO with higher PSRR
功能相同,但引腳輸出與所比較的裝置不同
TLV700 現行 具啟用功能的 200-mA 高 PSRR 低 IQ 低壓降電壓穩壓器 Similar device with better PSRR performance in other packages

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TLV742P 200-mA, Small Size, Low-Dropout Linear Voltage Regulator datasheet PDF | HTML 2017年 9月 14日
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018年 3月 21日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLV70728EVM-612 — TLV70728 200mA 低 IQ 低壓差 (LDO) 穩壓器評估模組

The TLV70728EVM-612 is a fully assembled and tested circuit for evaluating the TLV70728 200mA, Low IQ, Low Dropout Regulator for Portables. The TLV70728EVM-612 provides a single 2.8V regulated output.
使用指南: PDF
TI.com 無法提供
模擬型號

TLV74211P PSpice Transient Model (Rev. A)

SBVM747A.ZIP (64 KB) - PSpice Model
模擬型號

TLV74211P Unencrypted PSpice Transient Model

SBVM748.ZIP (2 KB) - PSpice Model
模擬型號

TLV74212P Unencrypted PSpice Transient Model

SBVM750.ZIP (2 KB) - PSpice Model
模擬型號

TLV74215P PSpice Transient Model

SBVM744.ZIP (64 KB) - PSpice Model
模擬型號

TLV74215P Unencrypted PSpice Transient Model

SBVM746.ZIP (2 KB) - PSpice Model
模擬型號

TLV74218P PSpice Transient Model

SBVM745.ZIP (67 KB) - PSpice Model
模擬型號

TLV74218P Unencrypted PSpice Transient Model

SBVM742.ZIP (2 KB) - PSpice Model
模擬型號

TLV74225P PSpice Transient Model

SBVM818.ZIP (65 KB) - PSpice Model
模擬型號

TLV74225P Unencrypted PSpice Transient Model

SBVM817.ZIP (2 KB) - PSpice Model
模擬型號

TLV74227P PSpice Transient Model

SBVM743.ZIP (64 KB) - PSpice Model
模擬型號

TLV74227P Unencrypted PSpice Transient Model

SBVM739.ZIP (2 KB) - PSpice Model
模擬型號

TLV74228P PSpice Transient Model (Rev. A)

SBVM737A.ZIP (64 KB) - PSpice Model
模擬型號

TLV74228P Unencrypted PSpice Transient Model

SBVM738.ZIP (2 KB) - PSpice Model
模擬型號

TLV74229P PSpice Transient Model

SBVM740.ZIP (64 KB) - PSpice Model
模擬型號

TLV74229P Unencrypted PSpice Transient Model

SBVM741.ZIP (2 KB) - PSpice Model
模擬型號

TLV74230P PSpice Transient Model

SBVM815.ZIP (65 KB) - PSpice Model
模擬型號

TLV74230P Unencrypted PSpice Transient Model

SBVM816.ZIP (2 KB) - PSpice Model
模擬型號

TLV74233P Unencrypted PSpice Transient Model

SBVM749.ZIP (2 KB) - PSpice Model
參考設計

TIDA-00300 — 適用於通訊和類比輸入/輸出模組的隔離式電源架構參考設計

This reference design provides a means to isolate I2C or SPI communication lines. This is often required in grid infrastructure applications such as protection relays and circuit breakers where high voltages are involved. This reference design provides both power isolation and signal isolation.
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00420 — ADC 架構、數位隔離、廣泛輸入、16 通道、AC/DC 二進位輸入參考設計

This reference design showcases a cost-optimized and scalable ADC-based AC/DC binary input module (BIM) architecture with reinforced isolation. The 16 channels of a 10- or 12-bit SAR ADC are used for sensing multiple binary inputs. The op amps, in addition to keeping the cost per-channel low, (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010034 — IEEE802.3at Type-1 PoE 和 12V 適配器輸入到 IP 網路攝影機的負載點參考設計

Power over Ethernet (PoE) enables power to be delivered over the same ethernet cable as data with no danger of cross-talk, interference, or corruption of the data streams. This reference design showcases end-to-end power tree for an IP network camera powered using PoE or 12-V adapter based on the (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01579 — 適合成像應用的高效率、低輸出漣波電源供應參考設計

The point-of-load power-tree on video surveillance systems is optimized with this reference design. This reference design has a high performance on key parameters such as output voltage accuracy, voltage ripple, and thermal dissipation. This high performance is possible with a small board area and (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
X2SON (DQN) 4 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片