首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

TPS61287

現行

具有可堆疊多相功能的 23V VIN、25V VOUT 20A 同步升壓轉換器

立即訂購
產品規格表

TPS61287

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 23 Switching frequency (min) (kHz) 285 Switching frequency (max) (kHz) 355 Features Adjustable current limit, Boost Sync, Cycle-by-cycle overcurrent protection, Enable, External Sync, Overvoltage protection, Programmable loop compensation, Thermal shutdown, UVLO Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (µA) 210 Duty cycle (max) (%) 96 Switch current limit (typ) (A) 20
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 23 Switching frequency (min) (kHz) 285 Switching frequency (max) (kHz) 355 Features Adjustable current limit, Boost Sync, Cycle-by-cycle overcurrent protection, Enable, External Sync, Overvoltage protection, Programmable loop compensation, Thermal shutdown, UVLO Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (µA) 210 Duty cycle (max) (%) 96 Switch current limit (typ) (A) 20
VQFN-HR (RZP) 14 7.5 mm² 3 x 2.5
  • Wide input voltage and output voltage range
    • VIN : 2.0V to 23V
    • 2.5V Minimum input voltage for start-up
    • VOUT : 4.5V to 25V
  • High efficiency and power capability
    • Programmable switch current limit: 5A to 20A
    • Integrated 8.5mΩ high side MOSFET
    • Switching frequency: 320kHz
    • Up to 92.3% efficiency at VIN = 3.6V, VOUT = 18V, and IOUT = 2.0A
    • Up to 95.48% efficiency at VIN = 7.2V, VOUT = 18V, and IOUT = 4.0A
  • Support stackable multi-phase function
  • Selectable Auto PFM and Forced PWM mode
  • Synchronization capability to external clock
  • Rich protection
    • Output overvoltage protection at 27V
    • Precise EN/UVLO threshold
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown
  • External loop compensation
  • 2.5mm × 3.0mm VQFN HotRod™ Lite package
  • Wide input voltage and output voltage range
    • VIN : 2.0V to 23V
    • 2.5V Minimum input voltage for start-up
    • VOUT : 4.5V to 25V
  • High efficiency and power capability
    • Programmable switch current limit: 5A to 20A
    • Integrated 8.5mΩ high side MOSFET
    • Switching frequency: 320kHz
    • Up to 92.3% efficiency at VIN = 3.6V, VOUT = 18V, and IOUT = 2.0A
    • Up to 95.48% efficiency at VIN = 7.2V, VOUT = 18V, and IOUT = 4.0A
  • Support stackable multi-phase function
  • Selectable Auto PFM and Forced PWM mode
  • Synchronization capability to external clock
  • Rich protection
    • Output overvoltage protection at 27V
    • Precise EN/UVLO threshold
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown
  • External loop compensation
  • 2.5mm × 3.0mm VQFN HotRod™ Lite package

The TPS61287 is a high-power density, synchronous boost converter that integrates high side synchronous rectifier MOSFET and uses an external low side MOSFET to provide a high efficiency and small size solution. The TPS61287 has wide input voltage range from 2.0V to 23V and the output voltage covers up to 25V with 20A switching valley current capablity.

The TPS61287 uses adaptive constant on-time valley current control topology to regulate the output voltage. Under moderate to heavy load condition, the TPS61287 operates in pulse width modulation (PWM) mode. There are two optional modes in light load by configuring the MODE pin: Auto PFM mode to improve light-load efficiency and Forced PWM to avoid audible noise and other problems caused by low switching frequency.

The TPS61287 supports stackable multi-phase operation. Up to 4pcs TPS61287 can be configured for multi-phase operation at same switching frequency to support higher power and input current balancing.

The TPS61287 offers a very small solution size with 2.5mm x 3.0mm VQFN HotRod™ Lite package with minimal external components.

The TPS61287 is a high-power density, synchronous boost converter that integrates high side synchronous rectifier MOSFET and uses an external low side MOSFET to provide a high efficiency and small size solution. The TPS61287 has wide input voltage range from 2.0V to 23V and the output voltage covers up to 25V with 20A switching valley current capablity.

The TPS61287 uses adaptive constant on-time valley current control topology to regulate the output voltage. Under moderate to heavy load condition, the TPS61287 operates in pulse width modulation (PWM) mode. There are two optional modes in light load by configuring the MODE pin: Auto PFM mode to improve light-load efficiency and Forced PWM to avoid audible noise and other problems caused by low switching frequency.

The TPS61287 supports stackable multi-phase operation. Up to 4pcs TPS61287 can be configured for multi-phase operation at same switching frequency to support higher power and input current balancing.

The TPS61287 offers a very small solution size with 2.5mm x 3.0mm VQFN HotRod™ Lite package with minimal external components.
filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS61287 23VIN , 25VOUT , 20A Synchronous Boost Converter with Stackable Multi-Phase Function datasheet (Rev. A) PDF | HTML 2024年 11月 1日
EVM User's guide TPS61287EVM-042 Evaluation Module User's Guide PDF | HTML 2024年 10月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS61287EVM — TPS61287 評估模組

TPS61287 評估模組 (EVM) 可協助在不同輸入電壓、輸出電壓和負載條件下評估 TPS61287 的行為及性能。此 EVM 專為 3.3V 至 4.2V 輸入電壓和 18V 輸出電壓應用所設計。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS61287 Encrypted Model

SLVME77.ZIP (112 KB) - PSpice Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RZP) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片