TPS62901

現行

採用 1.5-mm x 2-mm QFN 封裝的 3-V 至 17-V 輸入、1-A 高效低 IQ 降壓轉換器

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 1 Vin (min) (V) 3 Vin (max) (V) 17 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iq (typ) (µA) 4 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 1 Vin (min) (V) 3 Vin (max) (V) 17 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iq (typ) (µA) 4 Duty cycle (max) (%) 100
VQFN-HR (RPJ) 9 3 mm² 2 x 1.5
  • High efficiency for wide duty cycle and load range
    • IQ: 4µA typical
    • Selectable switching frequency of 2.5MHz and 1.0MHz
    • RDS(ON): 62mΩ high side, 22mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
  • Up to 1A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6V to 5.5V
    • VSET internal divider: 16 options between 0.4V and 5.5V
  • DCS-Contro topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power-good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62901 using the WEBENCH Power Designer
  • High efficiency for wide duty cycle and load range
    • IQ: 4µA typical
    • Selectable switching frequency of 2.5MHz and 1.0MHz
    • RDS(ON): 62mΩ high side, 22mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
  • Up to 1A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6V to 5.5V
    • VSET internal divider: 16 options between 0.4V and 5.5V
  • DCS-Contro topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power-good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62901 using the WEBENCH Power Designer

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
TPS62902 現行 採用 1.5-mm x 2-mm QFN 封裝的 3-V 至 17-V 輸入、2-A 高效低 IQ 降壓轉換器 Pin-to-pin 2-A output current
TPS62903 現行 採用 1.5-mm x 2-mm QFN 封裝的 3-V 至 17-V 輸入、3-A 高效低 IQ 降壓轉換器 Pin-to-pin 3-A output current

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS62901 , 3V to 17V, High Efficiency and Low IQ Buck Converter in 1.5mm × 2mm QFN Package datasheet (Rev. A) PDF | HTML 2024年 1月 23日
Application note How to Best Use TPS62903 for a Given Application Requirement PDF | HTML 2021年 8月 13日
Application note Comparison of TPS6290x vs. TPS621x0 PDF | HTML 2021年 7月 23日
Application brief Multi-Function Pins for Easy Designing PDF | HTML 2021年 7月 7日
EVM User's guide TPS6290x Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 5月 7日
Certificate TPS62901EVM-069 EU RoHS Declaration of Conformity (DoC) 2020年 12月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62901EVM-069 — 採用 1.5mm x 2-mm QFN 封裝的 17-VIN、1-A、低 IQ 降壓轉換器評估模組

TPS62901EVM-069 (BSR069-001) 評估模組 (EVM) 可幫助評估採用 1.5 mm x 2 mm QFN 小型封裝的 TPS62901 1-A 降壓轉換器。EVM 可從最高 17 V 的輸入電壓輸出 3.3-V 輸出電壓。TPS62901 是高效率、低 IQ 降壓轉換器,適合運用在各種工業、企業及個人電子產品應用,例如工廠與建築自動化、IP 網路攝影機、工業電腦、資料中心交換器、伺服驅動裝置、行動式與嵌入式運算,以及任何具有 12-V 輸入電壓或 1 芯至 4 芯鋰電池組的應用。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS62901 PSpice Transient Model

SLVMDO8.ZIP (243 KB) - PSpice Model
Gerber 檔案

BSR069A Gerbers

SNVC242.ZIP (394 KB)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RPJ) 9 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片