TPS7A74
- VOUT range: 0.65 V to 3.6 V
- Ultra-low VIN range: 0.65 V to 6 V
- VBIAS range: 1.7 V to 6 V
- Low dropout: 150 mV typical at 1.5 A, VBIAS = 5 V
- Noise: 7.1 µVRMS
- PSRR:
- 70 dB at 1 kHz
- 60 dB at 10 kHz
- 55 dB at 100 kHz
- 50 dB at 1 MHz
- 1.5% accuracy over line, load, and temperature
- Programmable soft-start provides linear voltage start-up
- VBIAS permits low VIN operation with good transient response
- UVLO on both IN and BIAS
- Stable with any output capacitor ≥ 10 µF
- Package: Small, 3-mm × 3-mm × 0.8-mm WSON-8
The TPS7A74 low-dropout (LDO) linear regulator provides an easy-to-use robust power management solution for a wide variety of applications. User-programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start up. The soft-start is monotonic and well-suited for powering many different types of processors and application-specific integrated circuits (ASICs). The enable input allows for easy sequencing with external regulators. This complete flexibility allows a solution to be configured that meets the sequencing requirements of field-programmable gate arrays (FPGAs), digital signal processors (DSPs), and other applications with special start-up requirements.
A precision reference and error amplifier deliver 1.5% accuracy over load, line, temperature, and process. The device is stable with any type of capacitor greater than or equal to 10 µF, and is fully specified for TJ = –40°C to +125°C. The TPS7A74 is offered in a small, 3-mm × 3-mm, WSON-8 package, yielding a highly compact, total solution size.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS7A74 1.5-A, Low-Dropout Linear Regulator With Programmable Soft-Start datasheet (Rev. B) | PDF | HTML | 2022年 8月 11日 |
White paper | Demystifying LDO Turn-On (startup) Time | PDF | HTML | 2024年 10月 5日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS7A74EVM-068 — 適用於含可編程緩啟動的 1.5-A LDO 線性穩壓器的 TPS7A74 評估模組
TPS7A74 評估模組 (EVM) 可協助設計工程師評估 TPS7A74 線性穩壓器的運作及性能,適合其本身的電路應用。此 EVM 配置包含適合各種廣泛應用的單一低雜訊、小尺寸、線性穩壓器。該穩壓器能以低 VIN 至 VOUT 壓差提供高達 1.5 A 的負載。
爲了穩定,請使用最小降額輸出電容 4.7-µF (或更大)。隨附新增高性能負載暫態電路,以改善低壓差 (LDO) 穩壓器的測量能力。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WSON (DSD) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。