現在提供此產品的更新版本
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
TPS7B4250-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification Level C6
- –20-V to 45-V Wide, Maximum Input Voltage Range
- Output Current, 50 mA
- Very-Low Output-Tracking Tolerance,
5 mV (max) - 150-mV Low Dropout Voltage When
IOUT = 10 mA - Combined Reference and Enable Input
- 40-µA Low Quiescent Current at Light Load
- Extreme, Wide ESR Range.
- Stable with 1-µF to 50-µF Ceramic Output Capacitor, ESR 1 mΩ to 20 Ω
- Reverse Polarity Protection
- Overtemperature Protection
- Output Short-Circuit Proof to Ground and Supply
- SOT-23 Package
All trademarks are the property of their respective owners.
The TPS7B4250-Q1 device is a monolithic, integrated low-dropout voltage tracker. The device is available in a SOT-23 package. The TPS7B4250-Q1 device is designed to supply off-board sensors in an automotive environment. The IC has integrated protection for overload, over temperature, reverse polarity, and output short-circuit to the battery and ground.
A reference voltage applied at the adjust-input pin, ADJ, regulates supply voltages up to VIN = 45 V with high accuracy and loads up to 50 mA.
By setting the adjust/enable input pin, ADJ/EN, to low, the TPS7B4250-Q1 device switches to standby mode which reduces the quiescent current to the minimum value.
For all available packages, see the orderable addendum at the end of the data sheet.您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS7B4250-Q1 50-mA 40-V Voltage-Tracking LDO With 5-mV Tracking Tolerance datasheet (Rev. C) | PDF | HTML | 2016年 9月 28日 |
| Functional safety information | TPS7B4250-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) | PDF | HTML | 2023年 4月 17日 | |
| Application brief | Automotive Off-Board Sensor Power Considerations | 2018年 9月 20日 | ||
| More literature | Fundamentals of designing with LDOs in auto battery direct connect applications | 2017年 2月 27日 | ||
| Application note | Short-Circuit Reliability Test for TPS7B4250-Q1 | 2016年 11月 16日 | ||
| Application note | Using Tracking LDOs as High-Side Switch (for Low-Current Applications) | 2016年 10月 28日 | ||
| Application note | Various Applications for Voltage-Tracking LDO | 2016年 8月 3日 | ||
| Application note | TPS7B4250-Q1 Pin FMEA | 2015年 9月 23日 | ||
| User guide | TPS7B4250 Evaluation Module | 2013年 10月 17日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS7B4250EVM — TPS7B4250-Q1 追蹤 LDO 穩壓器評估模組
The TPS7B4250 is a monolithic integrated low dropout voltage tracker in SOT-23 package. It is designed to supply off-board sensors in automotive environment. The IC has integrated protection for overload, over temperature, reverse polarity as well as output short circuit to battery and ground
Supply (...)
使用指南: PDF
參考設計
TIDA-020010 — 具有 HMI 的車用 HVAC 控制參考設計
This reference design offers a cost-effective solution for a heating, ventilation, and air conditioning (HVAC) human-machine interface (HMI) application. This reference design incorporates a synchronous step-down converter, multiple channel half-bridge motor driver for brushed DC motors (BDC), (...)
參考設計
PMP22322 — 65-W USB Type-C® ZVS 返馳參考設計
此參考設計為低成本、高密度 USB 轉接器，在 ZVS 返馳拓撲中使用 UCC28782 主動箝位返馳控制器和 UCC5304 隔離式驅動器。在 20-V 輸出時最大功率額定值為 65 W，但可針對 20-V/15-V/9-V/5-V 輸出電壓和 3 A 進行調整。此設計的峰值效率達 93.4%。平均效率和待機功率位準的設計符合 DoE Level VI 和 CoC Tier 2 限制。精巧設計尺寸爲 44 mm x 54 mm x 20 mm (48 cc 開放式框架)。
參考設計
PMP21479 — 適用於高功率密度 5-20V AC/DC 適配器、具有 Si FET 的 65W 主動鉗位返馳參考設計
This reference design uses the UCC28780 active clamp flyback controller to generate a 20-V/15-V/9-V/5-V adjustable output voltage. The maximum power rating is 65 W at 20-V output and up to 3 A at all other output voltage settings. This design reaches a peak efficiency of over 93% using silicon (...)
參考設計
TIDA-010047 — 採用 Si MOSFET 的 22-W/in3、93.1% 峰值效率、100-W USB-PD 3.0 AC/DC 適配器參考設計
This fully-tested reference design is a high-efficiency, high-power-density, AC/DC adapter solution with a wide input voltage range (100- to 240-V AC) for laptop adapters and smartphone charger applications. This design consists of a front-end transition-mode (TM) power factor correction (PFC) (...)
參考設計
PMP11136 — 車用無線電 USB 電源埠 (5V@2.1A) 和 LED 背光驅動器參考設計
The PMP11136 reference design supplies cable drop compensated USB outputs of 5V @ 2.1A and 5V @ 1A. Additionally, there is a buck converter output of 3.3V @ 2.5A and a 12V @ 0.163A current regulated LED boost converter.
參考設計
TIDA-00745 — 適用於車用車身控制模組的 15W 系統級電源參考設計
TIDA-00745 is a 14-W system-optimized (CISPR25 Class 4) SMPS design for an automotive body control module. All buck converters used in this design are switching at 2.1 MHz.
The design is divided into four major blocks:
- EMI filter: Common mode and a differential filter for conducted EMI suppression
- (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。