封裝資訊
| 封裝 | 針腳 QFN-FCMOD (VCB) | 10 |
| 操作溫度範圍 (°C) -40 to 125 |
| 包裝數量 | 運送業者 3,000 | LARGE T&R |
TPSM828303 的特色
- Optimized EMI performance
- Facilitates CISPR 11/32
compliance
- Integrated on-chip noise-filtering capacitors
- Measurements according to CISPR available
- 0.5V to 4.5V adjustable output voltage
- 1% FB voltage accuracy (–40°C to 125°C TJ)
- 55mΩ dropout resistance
- 2.25V to 5.5V input voltage range
- 2.0MHz switching frequency
- 7µA operating quiescent current
- DCS-Control topology
- Excellent transient response
- MODE pin selects between forced PWM and power save mode
- Supports 1.2V GPIO
- 100% duty cycle for lowest dropout
- Active output discharge
- Power-good output
- Thermal shutdown protection
- Hiccup or latch-off OCP/OVP
- PSpice and SIMPLIS models available
- Two package options with 0.5mm
pitch
- Standard QFN
- Shielded MagPack
- Create a custom design using the TPSM828303 with the WEBENCH® Power Designer
TPSM828303 的說明
The TPSM82830x are an easy-to-use, synchronous, step-down, DC/DC module family with integrated inductor and EMI reduction technologies. Based on the DCS-Control topology, the devices have a fast transient response yet with small output capacitance. The output voltage can be set down to 0.5V with high feedback voltage accuracy of 1% over the full operating junction temperature range. A mode pin selects between power saving and forced-PWM mode. The power save mode prolongs battery life at low output currents and the forced PWM mode maintains continuous conduction in the inductor to reduce ripple at constant switching frequency. An internal soft-start circuit ramps the voltage up tightly controlled and a power-good signal indicates correct output voltage. The devices support 100% mode. HICCUP short-circuit protection combined with thermal shutdown protect device and application. The family is available in a 3.0mm × 3.0mm × 1.95mm QFN package and 2.5mm × 2.6mm × 1.95mm MagPack package.