UC3846
- Automatic Feedforward Compensation
- Programmable Pulse-by-Pulse Current Limiting
- Automatic Symmetry Correction in Push-Pull
Configuration - Enhanced Load Response Characteristics
- Parallel Operation Capability for Modular Power
Systems - Differential Current Sense Amplifier with Wide
Common Mode Range - Double-Pulse Suppression
- 500-mA (Peak) Totem-pole Outputs
- ±1% Band Gap Reference
- Undervoltage Lockout
- Soft-Start Capability
- Shutdown Terminal
- 500-kHz Operation
The UC1846/7 family of control devices provides all of the necessary features to implement fixed-frequency, current-mode control schemes while maintaining a minimum external parts count. The superior performance of this technique can be measured in improved line regulation, enhanced load response characteristics, and a simpler, easier-to-design control loop. Topological advantages include inherent pulse-by-pulse current limiting capability, automatic symmetry correction for push-pull converters, and the ability to parallel while maintaining equal current sharing. \
Protection circuitry includes built-in undervoltage lockout and programmable current limit, in addition to soft-start capability. A shutdown function is also available, which can initiate either a complete shutdown with automatic restart or latch the supply off.
Other features include fully-latched operation, double-pulse suppression, deadline adjust capability, and a ±1% trimmed band gap reference.
The UC1846 features low outputs in the OFF state, while the UCx847 features high outputs in the OFF state.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | UCx846/7 Current Mode PWM Controller datasheet (Rev. C) | PDF | HTML | 2016年 1月 4日 |
Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
Technical article | When should you use PWM controllers? | PDF | HTML | 2016年 12月 2日 | |
Technical article | Before digital control, there were general-purpose PWMs | PDF | HTML | 2016年 10月 19日 | |
Application note | DN-45 UC3846, UC3856 and UCC3806 Push Pull PWM Current Mode Control ICs | 1999年 9月 5日 | ||
Application note | Modeling, Analysis and Compensation of the Current-Mode Converter | 1999年 9月 5日 | ||
Application note | U-93 A New Integrated Circuit for Current Mode Control | 1999年 9月 5日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
PDIP (N) | 16 | Ultra Librarian |
SOIC (DW) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點