UCC24612
- Supports Topologies such as Active Clamp Flyback, QR, DCM, CCM Flyback and LLC
- MOSFET VDS Sensing up to 230 V
- Operating Frequency Up to 1 MHz
- 1 MHz for UCC24612-1
- 800 kHz for UCC24612-2
- Wide VDD Range Allows for Direct Bias from 5-V to 28-V Output Systems
- 4-A Sink, 1-A Source Gate Driver with Proportional Gate Drive
- Adaptive Minimum Off-time for Increased Noise Immunity
- Cycle Limit Pre-Turn-off Improves Efficiency in CCM
- High or Low-Side Configurable
- Automatic Light-Load and Sleep-Mode Management with 320-µA standby current
- 16-ns Typical Turnoff Propagation Delay
- 9.5-V Gate Drive Clamp for Reduced Driving Loss
UCC24612 is a high performance synchronous rectifier controller and driver for standard and logic-level N-channel MOSFET power devices. By implementing a near-ideal diode emulation UCC24612 reduces losses of the output rectifier and indirectly the primary side losses. The drain to source (VDS) sensing control scheme allows UCC24612 to work with multiple topologies, such as Active Clamp Flyback, QR/DCM/CCM Flyback and LLC, et.
Integrated features simplify the design effort, enabling UCC24612 to excel in a variety of applications and frequencies. The wide operating VDD and VD voltage ranges enable simple implementation in systems with outputs up to 28 V. Efficiency and noise immunity is enhanced with adaptive minimum off-time. Variants UCC24612-1 and UCC24612-2 offer different minimum on-times to provide additional noise immunity. Robust operation in continuous conduction mode (CCM) is further enhanced with proportional gate-drive and CCM cycle limit pre-turn-off.
UCC24612 has multiple features that improve efficiency. The fast comparator with short propagation delays reduces switching loss. The 9.5-V gate drive clamp reduces MOSFET driving losses. Frequency dependent standby modes further decreases standby power. These features help UCC24612 be part of a greater system that meets stringent efficiency standards such as Department of Energy (DoE) Level VI and Code of Conduct (CoC) Tier 2.
UCC24612 is available in a SOT23-5 package.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | UCC24612 High Frequency Synchronous Rectifier Controller datasheet (Rev. A) | PDF | HTML | 2018年 2月 13日 |
| Technical article | 高頻共振轉換器設計考量，第 2 部分 | PDF | HTML | 2024年 3月 15日 | |
| More literature | PCB layout guidelines to optimize power supply performance | 2021年 3月 23日 | ||
| Technical article | Gain ultra-high power density for 100-W USB Power Delivery adapters | PDF | HTML | 2019年 3月 5日 | |
| Technical article | How topology selection can help improve reliability in industrial AC/DC power supp | PDF | HTML | 2019年 2月 14日 | |
| Technical article | Intelligently control an active clamp flyback | PDF | HTML | 2018年 3月 1日 | |
| Application note | UCC24610 and UCC24612 SR Range Extension Guide | 2017年 12月 18日 | ||
| EVM User's guide | Using the UCC24612-1EVM | 2017年 5月 16日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCC28780EVM-002 — 具有 Gan FET 的 UCC28780 主動鉗位返馳 45W AC/DC EVM
The UCC28780EVM-002 demonstrates high-efficiency and high-density for a 45-W off-line adapter using the UCC28780 active-clamp flyback controller at high frequency nominal 300 kHz using GaN MOSFET Power ICs, NV6115 and NV6117. The EVM also uses the UCC24612 synchronous rectifier controller on (...)
UCC28780EVM-021 — 具有 UCC24612 和 Si MOSFET 的 UCC28780 主動鉗位反馳式轉換器 45W EVM
The UCC28780EVM-021 is a 45-W evaluation module (EVM) for evaluating an off-line active-clamp flyback adapter for notebook charging and other applications. The EVM meets CoC Tier 2 and DoE Level 6 efficiency requirements. It is intended for evaluation purposes and is not intended to be an end (...)
UCC24612-1EVM — 二次側同步整流器控制器二極體更換展示板
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點